http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
허광희,전승곤,서상구,김대혁,Heo, Gwang Hee,Jeon, Seung Gon,Seo, Sang Gu,Kim, Dae Hyeok 한국지진공학회 2019 한국지진공학회논문집 Vol.23 No.4
In this study, SMG(Smart Material with Grease) was developed, which was improved the precipitation minute particle in grease during long term standstill. Also, small-sized cylinder damper equipped with an electromagnet in a piston was developed for using a performance evaluation of the damper with SMG and the dynamic load test, and damping force using Power model and Bingham model was derived in order to compare to the result of that of the damper. The data obtained from the dynamic load test were analyzed and plotted, and then a dynamic range was calculated to evaluate the usability of the damper with SMG. The performance of the damper with SMG was compared to the damping forse derived from the Power and Bingham model. The result of this evaluation shown that the usability of SMG damper was demonstrated by this test as a semi-active controlling equipment of small-sized damper.
Gender identity 기반의 Consumer targeting 에 관한 연구
전영승(Youngseung Jeon),전승곤(Seung Gon Jeon),한경식(Kyungsik Han) 한국HCI학회 2019 한국HCI학회 학술대회 Vol.2019 No.2
Social Networking Services(SNS)에서 광고 및 홍보의 영향력과 중요성이 급속히 증가하고 있기때문에 마케팅 담당자들은 SNS 콘텐츠를 이해하여 사용자 맞춤형 서비스를 제공하기 위해 많은 노력을 기울여 왔다. 사용자 특성과 함께 온라인 구매 패턴의 효과에 대한 연구가 활발하게 수행되었지만, 많은 연구가 인구학적 정보에 제한된 실험을 통해 진행된 연구이며, 로그 기반 분석 연구에도 사용자 모델링은 상대적으로 간단한 사용자 속성 (e.g., 연령, 생물학적성, 위치)을 사용하여 다소 제한적으로 수행되었다. 본 연구에서는 마케팅 담당자가 어떻게 SNS 를 이용해 소비자의 어떤 특성을 파악하기를 원하는지 인터뷰하였고, 그 결과 다중 요인, 양적으로 측정 가능한 gender identity (i.e., masculine, feminine, androgynous) 및 생물학적 성 (i.e., male, female)의 관점의 마케팅이 필요하다는 것을 알 수 있었다. 이를 바탕으로, 19,400 개의 Instagram 게시물의 데이터를 수집하여, 세 가지 gender identity 를 분류하는 모델을 개발하였다. 해당 모델에서는 세 가지 modality(i.e., image, text, activity)를 사용한다. 이 모델은 생물학적성 기준(남성, 여성 및 남성 + 여성)으로, 3 가지 gender identity 를 예측하는데 각각 77%, 72%, 72%의 F1-scores 를 얻었다. 우리의 결과는 게시물의 gender identity 를 식별할 수 있고, 이를 마케팅에 활용할 수 있는 가능성을 보여준다.
MR Damper의 Gap Size에 따른 제어성능 분석
허광희 ( Heo Gwang Hee ),전승곤 ( Jeon Seung Gon ),서상구 ( Seo Sang Gu ),김대혁 ( Kim Dae Hyeok ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 논문집 Vol.25 No.1
본 연구에서는 MR Damper의 제어력을 결정하는 다양한 요인들 중, 유로폭(Gap Size)을 다르게 선정하여 그에 따른 제어력의 변화를 확인하였다. 이를 위해 Gap Size 1.0mm, 1.5mm인 MR Damper 두 대를 제작하고 인가전류와 가진조건을 정하였으며 그에 따른 동하중 실험을 수행하였다. 실험결과 최소제어력은 Gap Size 1.0mm 조건이 Gap Size 1.5mm 조건보다 3.2배 높았으며 최대제어력은 Gap Size 1.0mm 조건이 Gap Size 1.5mm 조건보다 2.3배 높았다. 또한, 인가전류에 따른 제어력의 증가폭은 Gap Size 1.0mm일 때 34N, Gap Size 1.5mm일 때 12.7N으로 나타났다. Gap Size가 커질수록 전체 제어력과 인가전류에 따른 제어력의 증가는 감소하였다. 두 개의 MR Damper의 동적범위를 확인해본 결과 Gap Size 1.0mm일 때 평균 2.3, Gap Size 1.5mm일 때 평균 2.8인 것을 볼 때 두 MR Damper의 준능동제어장치로써 사용가능성을 확인하였다. In this study, the flow path width (Gap Size), which is the flow path of fluid, was selected differently among various factors that determine the Ccontrol Force of MR damper, and the change of Control Force was confirmed accordingly. For this purpose, two MR dampers with a Gap Size of 1.0mm and 1.5mm were fabricated, respectively, and dynamic load experiments were conducted according to changes in applied current and vibration conditions The experimental results showed that the minimum Control Force was 3.2 times higher than 1.5mm in the case of 1.0mm Gap Size, and the maximum Control Force was 2.3 times higher than 1.5mm in the case of 1.0mm Gap Size. In addition, the increased width of the Control Force according to applied current was 34N for Gap Size 1.0mm, and 12.7N for Gap Size 1.5mm. As the gap Size increased, the overall Control Force and the increase in the Control Force by the applied current decreased. Next, the dynamic range, which is a performance evaluation index of the semi-active Control device, was 2.3 on average under 1.0mm condition and 2.8 on average under 1.5mm condition, confirming the possibility of utilization as a semi-active Control device.
손병직 ( Byung Jik Son ),전승곤 ( Seung Gon Jeon ),허광희 ( Gwang Hee Heo ) 한국복합신소재구조학회 2015 복합신소재구조학회논문집 Vol.6 No.3
This paper introduces a digital image processing(DIP) method as a method for measuring the displacement of pylon. The comparison of DIP results and ANSYS analysis results verified the validity of the image processing technique. Normalized cross-correlation(NCC) coefficient was used and experiments were performed three times. It shows that the displacement difference was 22% and 5% compared to ANSYS results. Therefore, the image processing method is expected to be able to measure the displacement of pylon sufficiently.
HCI 방법론 기반의 현실감 있는 VR 소방훈련 요소 파악 및 검증
박병건(Byung Geon Park),전승곤(Seung-Gon Jeon),한경식(Kyungsik Han) 한국HCI학회 2020 한국HCI학회 학술대회 Vol.2020 No.2
최근 재난 안전에 대한 관심이 높아지면서 위급 상황에 대비하고자 하는 노력이 진행되고 있고, 이를 위해 재난 상황에서의 대피 및 행동 요령을 교육받을 수 있는 가상 현실(Virtual Reality) 모의 훈련에 대한 수요가 높아지고 있다. 그러나 현재 시행되고 있는 많은 VR 소방 훈련 프로그램들은 교육 대상자들의 요구사항, 그리고 재난 상황에 대한 정확한 이해가 진행되지 않은 상태에서 개발된 경우가 많다. 본 연구에서는 소방관 훈련을 위해 화재 상황 VR 훈련 시스템을 개발하고 HCI (Human-Computer Interaction) 방법론을 기반으로 지속적인 개선을 진행하였다. 또한, 시스템의 효과성을 검증하기 위해 18 명의 실험자와의 user study 를 통하여 개발한 시스템을 현재 운영되고 있는 다른 VR 소방 훈련 시스템과 4 가지 인간 요인(i.e. presence, reality, meaning, play) 관점에서 비교 및 분석하였다. 그 결과, 실험자들은 우리가 개발한 소방 훈련이 meaning 을 제외한 나머지 인간 요인 관점에서 더 높은 사용자 경험을 제공한 것을 확인할 수 있었다.
허광희 ( Heo Gang Hee ),전승곤 ( Jeon Seung Gon ),김대혁 ( Kim Dae Hyeok ),이진옥 ( Lee Chin Ok ),서상구 ( Seo Sang Gu ) 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.22 No.1
In this study, the SMG fluid was developed for compensating the defect of the MR Fluid that is commonly used in Semi-active control system. And the damper with SMG fluid have been developed for practical application. The dynamic load test was conducted to evaluate the control performance of the SMG damper at 0.5Hz and 1Hz frequency conditions and 0A and 0.5A current conditions. As a result, the remarkable performance of the SMG damper was verified.
허광희 ( Heo Gwang-hee ),전승곤 ( Jeon Seung-gon ),임한석 ( Lim Han-seok ),이재훈 ( Lee Jae-hoon ),서상구 ( Seo Sang-gu ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.2
다세대가 생활하는 아파트와 같은 공동주택의 경우 단독주택과는 다르게 화재가 발생하였을 때 신속한 대피가 어려워 인명피해로 이어지는 경우가 많다. 이러한 문제로 피난기구가 설치된 별도의 대피공간을 의무적으로 설치하도록 규정하면서 대피공간 확보에 대한 중요성이 높아지고 있다. 그러나 일부 주거자들은 화재에 대한 불감증으로 인하여 평상시 대피공간에 불필요한 물건을 적치하면서 창고처럼 사용되고 있다. 이로 인하여 화재발생 시 즉각적으로 사용하여야 하는 대피공간이 제 역할을 하지 못하게 되고, 이는 대형 참사로 이어질 가능성이 높다. 따라서 본 연구에서는 화재로부터 즉각적인 피난이 가능하도록 대피공간 내의 적치물을 상시 감지할 수 있는 적치물 감지센서등을 개발하였으며, 실험을 통하여 개발된 적치물 감지센서등의 성능을 검증하였다.
허광희 ( Heo Gwang Hee ),전승곤 ( Jeon Seung Gon ),서상구 ( Seo Sang Gu ),김대혁 ( Kim Dae Hyeok ),김민기 ( Kim Min Gi ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.1
If the MR fluid damper does not work, the magnetic powder (carbonyl iron powder) will sediment. To overcome this problem, we developed an EMR (Enhanced Magneto Rheological Fluid) fluid and evaluated control performance. For the dynamic load test using MR fluid and EMR fluid was conducted to evaluate control power and DR (Dynamic Range). In the damper performance test, the current was tested at intervals of 0.5A from 0.0A to 2.5A, and the control power of the EMR fluid was 84% compared to the control power of the MR fluid, The DR of the EMR Damper was 7.5. When the DR is 5.0 or higher, it is generally used as a semi-active control device. Therefore, the EMR fluid has proved its usability as a semi-active control device by showing 7.5 DR to 76% control performance of existing MR damper.