http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유아교사가 지각하는 중간관리자의 감성리더십과 교사의 직무만족도 및 셀프리더십과의 관계
장하늘(Jang, Ha Nul) 한국영유아교육지원학회 2019 영유아교육지원연구 Vol.4 No.1
본 연구의 목적은 유아교육기관 중간관리자의 감성리더십과 유아교사의 직무만족도 및 셀프리더십에 대한 교사의 인식을 분석하고 각 변인들 간의 관계와 유아교육기관 중간관리자의 감성리더십이 유아교사의 직무만족도와 셀프리더십을 예측하는 정도에 대해 알아보고자 한다. 이를 위하여 유아교사 234명을 대상으로 설문지 조사를 실시하였다. 수집된 자료는 연구문제에 따라 상관관계분석, 다중회귀분석의 단계선택방식을 실시하였다. 연구결과는 다음과 같다. 첫째, 유아교육기관 중간관리자의 감성리더십, 유아교사의 직무만족도 및 셀프리더십에 대한 유아교사의 인식 수준은 모두 평균 이상으로 나타났다. 둘째, 유아교육기관 중간관리자의 감성리더십과 유아교사의 직무만족도, 셀프리더십 간의 정적인 유의미한 상관관계가 있는 것으로 나타났다. 셋째, 유아교육기관 중간관리자 감성리더십의 하위요인은 교사의 직무만족도와 셀프리더십에 유의미한 영향을 미치는 경향성이 나타났다. 따라서 교직을 수행하며 느끼는 만족과 교사 스스로 동기부여, 보상을 높이기 위해 유아교육기관의 중간관리자 역할의 중요성과 감성리더십을 향상시킬 수 있는 다양한 교육지원과 프로그램 개발이 필요함을 시사한다. Purposes of this study are to determine how teachers perceptions of middle managers emotional leadership on their job satisfaction and self-leadership, how middle managers emotional leadership relates to teachers job satisfaction and self-leadership, and to predict trends of middle managers emotional leadership on teachers job satisfaction and self-leadership at institute of early childhood education. Research findings were as follows were as follows: First, the level of teachers perceptions of middle managers emotional leadership on job satisfaction and self-leadership came out above average. Second, middle managers emotional leadership was significantly related to teachers job satisfaction and self-leadership. In other words, as the level of middle managers emotional leadership increased, teachers job satisfaction and self-leadership level were also raised. Finally, sub-factors of middle managers emotional leadership tend to affect teachers job satisfaction and self-leadership. In conclusion, this study proved the importance of middle managers emotional leadership to improve teachers job satisfaction and self-leadership. Significance of the enlightenment in middle managers roles and the necessity of variable educational supports along with program development are suggested to improve middle managers emotional leadership.
비부식성 플럭스를 이용한 알루미늄 브레이징용 필러 소재의 저온 성형용 금속 복합 분말 개발
김대영,장하늘,윤대호,신윤호,김성호,최현주,Kim, Dae-Young,Jang, Ha-Neul,Yoon, Dae-Ho,Shin, Yun-Ho,Kim, Seong-Ho,Choi, Hyun-Joo 한국분말재료학회 (*구 분말야금학회) 2019 한국분말재료학회지 (KPMI) Vol.26 No.1
In aluminum brazing processes, corrosive flux, which is used in preventing oxidation, is currently raising environmental concerns because it generates many pollutants such as dioxin. The brazing process involving non-corrosive flux is known to encounter difficulties because the melting temperature of the flux is similar to that of the base material. In this study, a new brazing filler material is developed based on aluminum and non-corrosive flux composite powder. To minimize the interference of consolidation aluminum alloy powder by the flux, the flux is intentionally embedded in the aluminum alloy powder using a mechanical milling process. This study demonstrates that the morphology of the composite powder can be varied according to the mixing process, and this significantly affects the relative density and mechanical properties of the final filler samples.
이용택(Yongtaek Lee),이원희(Wonhee Lee),장하늘(Haneul Jang) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
A CO₂ incubator is a device used for culturing, growing, and maintaining cells or microorganisms, and it is necessary to precisely maintain the optimum temperature, humidity, and CO₂ concentration in the internal atmosphere for cell growth. Through the benchmarking of the existing CO₂ incubator, internal flow and transient heat transfer were observed through computational analysis. Variation of the temperature distribution inside the chamber was observed when the air was heated from the 6 sides surrounding the chamber. After 8 seconds from the start of heating, the vicinity of the wall was heated to 67 ℃, but the temperature of the tray on which the sample would be placed did not reach the target temperature of 37 ℃. It is expected that the results of this study will be utilized in determining the control logic of the heating unit and the temperature measuring location during product development.
김송이 ( Song-yi Kim ),오혜령 ( Hye-Ryeong Oh ),이석재 ( Seok-jae Lee ),이아영 ( A-young Lee ),장하늘 ( Haneul Jang ),김휘준 ( Hwi-jun Kim ),이민하 ( Min-ha Lee ) 한국주조공학회 2021 한국주조공학회지 Vol.41 No.3
진공 가스분사법으로 제조된 Fe<sub>75</sub>B<sub>13</sub>P<sub>5</sub>Nb<sub>2</sub>Hf<sub>1</sub>C<sub>4</sub> 합금의 응고중 액상의 크기와 이에 따른 냉각속도의 변화가 정출상의 형성에 미치는 영향에 대한 고찰을 하였다. 고온 액상에서 동일한 조건으로 응고된 서로 다른 크기의 액상이 구형의 분말형태로 응고될 때 크기에 따른 임계냉각속도의 차이를 계산하였으며, 액상의 평균 반지름이 3배정도 크기 차이가 날 경우 고상으로 변태할 때 임계냉각속도가 13.5배까지 차이가 나는 것을 알 수 있었다. 이러한 임계냉각 속도의 차이에 따른 정출상의 형성과 정출상의 형태와 크기에 따른 탄화물의 형성 거동을 조사하여 열역학 계산으로 예측된 결과와 비교 분석하였으며, 분말입자의 크기가 20~45 마이크론일 경우 Hf과 Nb이 포함된 MC타입의 탄화물이 초정으로 형성 되는 것을 알 수 있었으며 이때 Hf과 Nb의 비율은 합금의 조성 및 냉각속도에 따라 변화됨을 관찰 할 수 있었다. We present the effect of the critical cooling rate during rapid solidification on the nucleation of precipitates in an Fe<sub>75</sub>B<sub>13</sub>P<sub>5</sub>Nb<sub>2</sub>Hf<sub>1</sub>C<sub>4</sub> (at.%) alloy. The thermophysical properties of the rapidly solidified Fe<sub>75</sub>B<sub>13</sub>P<sub>5</sub>Nb<sub>2</sub>Hf<sub>1</sub>C<sub>4</sub> liquids, which were obtained at various cooling rates with various sizes of gas-atomized powder during a high-pressure inert gas-atomization process, were evaluated. The cooling rate of the small-particle powder (≤20 μm) was 8.4×10<sup>5</sup> K/s, which was 13.5 times faster than that of the large-particle powder (20 to 45 mm; 6.2×10<sup>4</sup> K/s) under an atomized temperature. A thermodynamic calculation model used to predict the nucleation of the precipitates was confirmed by the microstructural observation of MC-type carbide in the Fe<sub>75</sub>B<sub>13</sub>P<sub>5</sub>Nb<sub>2</sub>Hf<sub>1</sub>C<sub>4</sub> alloy. The primary carbide phase was only formed in the large-particle gas-atomized powder obtained during solidification at a slow cooling rate compared to that of the small-particle powder.