http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이헌민,김현승,Lee, Hurn-Min,Kim, Hyeon-Seung 한국토지주택공사 토지주택연구원 2020 LHI journal of land, housing, and urban affairs Vol.11 No.4
In this research, the automated system for 3D modeling and stability evaluation of caisson was developed. It is possible to build a BIM model while examining the stability of the structures to improve the practical use of BIM technology. This study analyzed industry cases and guidelines for caisson stability evaluation and BIM-based modeling. As a result, the data for calculating the stability evaluation of caisson as well as the modeling parameters were derived. In particular, the automated system for 3D modeling, which reflects more than 30 parameters, allows for BIM models for various types of the caisson, such as open-cell caisson, open-cell caisson with uneven, slit caisson, slit caisson with uneven, and curved caisson. The study tested the proposed system using case studies and found that it helps not only to automate the BIM model with various caisson types as parameters but also to make partial shape changes accessible. The study also confirmed that the stability evaluation can be quickly carried out with shapes changed. Finally, the study results suggest that the proposed method should complete the task seven times as fast as the conventional work method.
이헌민,이진경,유재명,신현목,Lee, Heon-Min,Lee, Jin-Kyoung,Yoo, Jae-Myoung,Shin, Hyun-Mock 한국전산구조공학회 2011 한국전산구조공학회논문집 Vol.24 No.4
국내 토목분야의 건설산업에서는 비효율적인 의사소통으로 인하여 발생하는 업무전환 단계에서의 정보누락 및 그로 인한 비용손실 등의 문제점을 해소시키기 위한 획기적인 해결책으로 BIM의 도입이 대두되고 있다. BIM은 구조물의 생애주기 전 단계에서 발생되는 모든 정보들을 3차원 파라메트릭 CAD와 연계된 3차원 정보모델을 통하여 관리하여 정보활용의 효율성을 극대화시킨다. 본 논문에서는 BIM기반의 교량건설 프로젝트의 구조설계 업무에서 사용할 목적으로 강상자형 교량의 3차원 정보모델을 활용한 내진해석 프로세스를 제안하였다. 또한 3차원 정보모델의 속성정보들이 구조적 데이터를 내재할 수 있도록 하기 위하여 3차원 모델링작업이 구조설계 업무를 통하여 결정되는 정보들을 활용하여 이루어질 수 있도록 하는 프로세스를 제안하였다. 제시된 프로세스는 현재 건설이 진행 중인 강상자형 교량을 적용하여 구성하였다. 또한 프로세스를 적용하여 내진해석의 최종 산출물인 내진계산서의 도출이 가능하다. The communication of each others is lack between planing, design, construction and maintenance in domestic construction industry. This problem makes the omission of information and the loss of cost. So, the introduction of BIM can be the solution about that. BIM manages all information generated during all life-cycle of a structure and consequently maximizes the efficiency of utilizing information. This is done through 3D information model associated with a three-dimensional(3D) parametric CAD. This study proposes the seismic analysis process of steel box bridge for structural design of bridge construction project based on BIM. The additional process is needed for the purpose that structural data is inherent in the property information of 3D information model. This process has 3D modeling progress done by using the information decided in design phase. The design document of seismic analysis can be derived with the proposed process to steel box bridge.
박막형 Si태양전지를 위한 후면반사층 ZnO:Al 최적화
이승윤(Lee, Seung-Yoon),지광선(Ji, Kwang-Sun),어영주(Eo, Young-Joo),이해석(Lee, Hae-Suk),이헌민(Lee, Heon-Min),이돈희(Lee, Don-Hee) 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.05
비정질 Si박막 태양전지의 후면 반사층을 위한 ZnO:Al TCO박막을 RF Magnetron Sputtering 방법으로 증착하였으며 이의 전기적, 광학적 특성 및 구조를 최적화하였다. Sputtering의 공정변수인 증착 RF 파워, 기판온도, 타겟-기판 거리, 증착압력을 변화시켜 ZnO:Al 단일막의 전기적, 광학적 특성을 최적화 하였고,이를 소면적 태양전지 셀 및 모듈에 적용하였다.그 중 증착 RF파워 및 압력이 단일막의 전기적,광학적 특성에 타겟-기판거리는 박막의 균일도에 큰 영향을 주었다. 압력에 따른 박막의 치밀도를 SE EMA방법으로 정량화하였고, 광학적, 전기적 특성과 연관하여 해석하였다. ZnO:Al 박막의 물성을 최적화하여 태양전지 셀에 적용한 결과 두께 80nm에서 가장 큰 Jsc의 증가를 보였고, 적용 전에 비해 약 18%의 광변환효율의 증가를 얻었다. 최적화된 태양전지 셀의 광변환효율은 9.9%, 모듈 효율은 7.4%였다.
건설정보모델의 속성입력 간소화에 관한 연구-Ⅱ : 구조계산식이 반영된 옹벽 변수모델의 개발
이헌민(Heon-Min Lee),김현승(Hyeon-Seung Kim),이일수(Il-Soo Lee) 한국산학기술학회 2023 한국산학기술학회논문지 Vol.24 No.2
본 연구의 목표는 구조 계산 정보를 계산하여 속성에 자동으로 반환시켜 줄 수 있는 옹벽에 대한 BIM 변수 모델을 개발하는 것이다. 이를 위하여 이러한 BIM 변수 모델을 스크립트 언어로 개발하고 올바른 결과가 도출되는지 검증하였다. 본 연구를 통하여 개발된 변수 모델의 주요 기능은 다음의 세 가지로 요약될 수 있다. 첫 번째, 사용자가 입력한 설계 변수에 의하여 철근을 포함한 옹벽의 3차원 모델이 실시 설계 수준으로 구축된다. 두 번째, 옹벽의 3차원 모델이 구축됨과 동시에 현행 구조계산서에 존재하는 모든 설계 검토 정보들이 자동으로 계산되며 이 값들은 속성으로 자동 반환된다. 세 번째, 단면이 변화하는 구간의 어느 위치에서나 옹벽의 안정 검토와 단면 검토를 수행할 수 있다. 본 연구에서 제시하는 BIM 변수 모델 개발 방식을 활용하면 이미 설계가 완료된 2차원 도면으로 3차원 모델을 다시 제작하는 기존의 BIM 전환 설계에서 벗어나 건설정보모델 자체를 구조 계산 도구와 성과품으로 활용하는 BIM 전면 설계가 가능할 것으로 기대된다. The purpose of this study was to develop a parametric building information model (BIM) for retaining walls that can calculate structural calculation information and automatically return it as attributes. The parametric BIM was developed in a scripting language, and we verified that the correct results were derived. The three main functions of the model can be summarized as follows. First, a 3D model of a retaining wall, including rebar, is constructed at the design level by user input of design variables. Second, as the 3D model of the retaining wall is built, all design review information in current structural computation documents is automatically calculated, and the dependent variable assigned to these values is automatically returned as an attribute. Third, it is possible to perform a stability review and a cross-sectional review of the retaining wall at any position in the section where the cross section changes. Using the method presented, it is expected that the building information model can be used as a structural calculation tool and design product rather than existing BIM conversion design, in which 3D models are recreated with completed 2D drawings.