http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이태익,김철규,김민성,김택수,Lee, Tae-Ik,Kim, Cheolgyu,Kim, Min Sung,Kim, Taek-Soo 한국마이크로전자및패키징학회 2016 마이크로전자 및 패키징학회지 Vol.23 No.3
본 논문에서는 폴리머 기반의 유연 기판 위 적층 된 다양한 필름의 굽힘 탄성계수의 간접 측정법을 소개한다. 패키징 기판의 다양한 적층 재료들의 탄성계수는 기계적으로 신뢰성 있는 전자기기 개발에 결정적이지만, 기판과 매우 견고히 접합하고 있는 적층 필름을 온전히 떼어 내어 자유지지형(free-standing) 시편을 만들기 어렵기 때문에 그 측정이 쉽지 않다. 이를 해결하기 위해 본 연구에서는 필름-기판의 복합체 시편에 대한 3점 굽힘을 진행하였고 시편 단면에 면적 변환법(area transformation rule)을 적용한 응력 해석을 수행하였다. 탄성계수를 알고 있는 기판에 대하여, 굽힘 시험으로 얻은 다층 시편의 강성으로부터 필름과 기판의 탄성계수 비를 계산하였으며, 전기 도금 구리 시편을 이용하여 양면 적층, 단면 적층의 두 가지 해석 모델이 실험 평가되었다. 또한 주요 절연체 적층 재료인 prepreg (PPG)와 dry film solder resist (DF SR)의 굽힘 탄성계수가 양면 적층 시편 형태로 측정 되었다. 결과로써 구리 110.3 GPa, PPG 22.3 GPa, DF SR 5.0 GPa이 낮은 측정 편차로 측정 됨으로써 본 측정법의 정밀도와 범용성을 검증하였다. In this paper, we present an indirect method of elastic modulus measurement for various lamination layers formed on polymer-based compliant substrates. Although the elastic modulus of every component is crucial for mechanically reliable microelectronic devices, it is difficult to accurately measure the film properties because the lamination layers are hardly detached from the substrate. In order to resolve the problem, 3-point bending test is conducted with a film-substrate specimen and area transformation rule is applied to the cross-sectional area of the film region. With known substrate modulus, a modulus ratio between the film and the substrate is calculated using bending stiffness of the multilayered specimen obtained from the 3-point bending test. This method is verified using electroplated copper specimens with two types of film-substrate structure; double-sided film and single sided film. Also, common dielectric layers, prepreg (PPG) and dry film solder resist (DF SR), are measured with the double-sided specimen type. The results of copper (110.3 GPa), PPG (22.3 GPa), DF SR (5.0 GPa) were measured with high precision.
무전해 니켈 도금액 pH 변화에 따른 ENIG/Sn-Ag-Cu솔더 접합부의 취성파괴 특성
서원일,이태익,김영호,유세훈,Seo, Wonil,Lee, Tae-Ik,Kim, Young-Ho,Yoo, Sehoon 한국마이크로전자및패키징학회 2020 마이크로전자 및 패키징학회지 Vol.27 No.3
본 연구에서는 무전해 니켈 도금액 pH 변화에 따른 electroless nickel immersion gold (ENIG)/Sn-3.0wt.%Ag-0.5wt.%Cu(SAC305) 솔더 접합부 취성 파괴 거동에 대하여 평가하였다. ENIG 표면처리를 위한 무전해 니켈 도금액의 pH는 4.0에서 5.5로 변화 시켰다. 무전해 니켈 도금 후 Ni-P 표면 관찰 결과, 도금액의 pH가 낮아질수록 Ni-P 층 nodule 표면에 핀홀이 증가하였다. 솔더링 후 접합부 계면에서는 (Cu,Ni)6Sn5 금속간화합물이 형성되었으며, 무전해 니켈 도금액의 pH가 증가할수록 솔더접합부의 계면 금속간화합물의 두께는 증가하였다. 고속전단 시험을 통하여 ENIG/SAC305 솔더 접합부의 취성파괴 거동을 확인하였으며, 무전해 니켈 도금액의 pH가 증가할수록 솔더접합부의 전단강도는 감소하는 경향을 보였다. 또한, 솔더 접합부의 취성 파괴율은 pH가 5일 때 가장 높은 값을 보였다. The behavior of brittle fracture of electroless nickel immersion gold (ENIG) /Sn-3.0wt.%Ag-0.5wt.%Cu (SAC305) solder joints was evaluated. The pH of the electroless nickel plating solution for ENIG surface treatment was changed from 4.0 to 5.5. As the pH of the Ni plating solution increased, pin hole in the Ni-P layer increased. The thickness of the interfacial intermetallic compound (IMC) of the solder joint increased with pH of Ni plating solution. The high speed shear strength of the SAC305 solder joint on ENIG surface finish decreased with the pH of the Ni plating solution. In addition, the brittle fracture rate of the solder joint was the highest when the pH of the Ni plating solution was 5.