http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비정질 규소 반도체의 과도적 수송에 대한 금지대 상태 효과
윤종환(Jong-Hwan Yoon),신승호(Seung-Ho Shin) 강원대학교 기초과학연구소 1986 기초과학연구 Vol.3 No.-
열처리와 조광 실험을 통하여 비정질 규소 반도체의 과도적 수송현상에 대한 금지대 상태의 효과를 연구하였다. 과도적 광전류는 열처리와 조광에 대하여 변하지만 광전류로부터 얻는 과도적 이동도는 열처리에 의해서만 변한다. 이러한 결과는 밴드 끝 상태들만이 과도적 이동도에 관여함을 의미한다. It has been investigated the effects of the band tail states and the deep gap states on the transient transport phenomena in hydrogenated amorphous silicon from the post-annealing and light soaking. It was observed that the transient photocurrent signals strongly depend on the both treatments, but the transient mobility obtained from the transient signals is only changed by the annealing. This result indicates that the band tail states are only responsible for the transient mobility.
LCD 패널 불량 검출을 위한 오토포커싱 알고리즘 개발
윤종환(Jong-Hwan Yoon),이대종(Dae-Jong Lee),이상원(Sang-Won Lee),전명근(Myung-Geun Chun) 한국지능시스템학회 2011 한국지능시스템학회 학술발표 논문집 Vol.21 No.1
일반적으로 Autofocus를 할 때의 영상은 모두 다른 초점값을 가진다는 가정으로 모든 렌즈 이동에 따른 초점 값을 이용하여 포커스 위치를 탐색하게 된다. 하지만 입력 영상을 LCD 패널로 한정할 경우 렌즈 이동에 따른 초점값이 비슷하기 때문에 렌즈 이동거리에 따른 모델 값을 구축하여 정위치 포커스를 찾을 수 있다. 본 논문에서 개발한 알고리즘은 Tenengrad 방법을 이용하여 초점값을 계산하였으며, 계산된 초점값을 이용하여 렌즈의 이동거리별 선형회귀모델을 구축하였다. 선형희귀모델값과 측정된 초점값을 비교하여 정위치 포커스를 찾도록하였다.
스테레오 카메라를 이용한 적응적인 장애물 회피 알고리즘 개발
윤종환(Jong-Hwan Yoon),최돈진(Don-Jin Choi),전명근(Myung-Geun Chun) 한국지능시스템학회 2009 한국지능시스템학회 학술발표 논문집 Vol.19 No.2
본 논문에서는 스테레오 카메라로부터 취득한 3차원 영상정보를 이용하여 이동경로를 추정하고 추정된 이동경로에 적응적인 장애물 회피 알고리즘을 개발하고자한다. 우선 이동로봇의 이동경로는 3차원 영상정보에서의 거리변화를 이용하여 추정한다. 다음 단계로 전방에 장애물이 존재할 경우 3차원 영상정보에서의 거리 값을 이용하여 효과적으로 장애물을 회피하도록 하는 알고리즘을 개발한다. 개발된 알고리즘은 스테레오 카메라가 장착된 이동로봇에 실시간으로 적용하여 검증한다.
손종환 ( Jong-hwan Son ),윤완상 ( Wansang Yoon ),김태정 ( Taejung Kim ),이수암 ( Sooahm Rhee ) 대한원격탐사학회 2021 大韓遠隔探査學會誌 Vol.37 No.3
최근 많은 영역에서 고해상도 인공위성의 활용이 증가하고 있다. 안정적으로 유용한 위성영상을 공급하기 위해서는 자동 정밀 기하보정 기술이 필요하다. 일반적으로 위성영상의 기하보정은 정확한 지상좌표와 영상좌표와의 대응점으로 설정된 지상기준점을 이용하여 기하학적인 왜곡을 보정한다. 따라서 자동으로 정밀기하보정을 수행하기 위해서는 높은 품질의 지상기준점을 자동으로 획득하는 것이 핵심이다. 본 논문에서는 처리할 고해상도 위성영상과 지상기준점 칩의 영상 피라미드를 구축하고 영상 피라미드의 각 층에서 위성영상과 지상기준점 칩 간 영상정합, 오정합점 탐지, 정밀 센서모델링을 반복적으로 수행하는 반복 정밀 기하보정 방안을 제시하였다. 해당 알고리즘을 통해 자동으로 높은 품질의 지상 기준점을 자동으로 획득하고 이를 바탕으로 고해상도 위성영상의 기하보정 성능을 향상시키고자 하였다. 제안한 알고리즘의 성능을 분석하기 위해 KOMPSAT-3 및 3A Level 1R 영상 8 Scene을 사용하였으며, 수동으로 추출한 검사점을 이용하여 정확도 분석을 수행한 결과 평균 1.5 pixel, 최대 2 pixel의 정확도의 기하보정 성능을 확인할 수 있었다. Recently, the use of high-resolution satellites is increasing in many areas. In order to supply useful satellite images stably, it is necessary to establish automatic precision geometric correction technic. Geometric correction is the process that corrected geometric errors of satellite imagery based on the GCP (Ground Control Point), which is correspondence point between accurate ground coordinates and image coordinates. Therefore, in the automatic geometric correction process, it is the key to acquire high-quality GCPs automatically. In this paper, we proposed iterative precision geometry correction method. we constructed an image pyramid and repeatedly performed GCP chip matching, outlier detection, and precision sensor modeling in each layer of the image pyramid. Through this method, we were able to acquire high-quality GCPs automatically. we then improved the performance of geometric correction of high-resolution satellite images. To analyze the performance of the proposed method, we used KOMPSAT-3 and 3A Level 1R 8 scenes. As a result of the experiment, the proposed method showed the geometric correction accuracy of 1.5 pixels on average and a maximum of 2 pixels.
롤러다짐 댐 콘크리트의 효율적인 배합비 도출에 관한 연구
원종필,윤종환,김완영,Won, Jong-Pil,Yoon, Jong-Hwan,Kim, Wan-Young 한국농공학회 2004 한국농공학회논문집 Vol.46 No.1
Roller-compacted concrete(RCC) dam have gained acceptance worldwide in a relatively short time due to their low cost, which is derived in part from their rapid method of construction. And RCC has recently emerged as an economically attractive material for dam construction, replacing the use of conventional concrete and even challenging the economics of earthfill and rockfill embankment dams. There are existing two major mix design methods. one used in USA and the other used in Japan. In this study, proper mix proportions of concrete for RCC dam is obtained using method of compound their merit.
원종필 ( Won Jong Pil ),황금식 ( Hwang Keum Sic ),윤종환 ( Yoon Jong Hwan ),장필성 ( Jang Pil Sung ),김명균 ( Kim Myung Koun ) 한국농공학회 2003 한국농공학회 학술대회초록집 Vol.2003 No.-
Plastic shrinkage cracking occurs at the exposed surfaces of freshly placed concrete due to consolidation of the concrete mass and rapid evaporation of water from the surface. This so-called shrinkage cracking is a major concern for concrete, especially for flat structural such as pavement, slabs for industrial factories and walls. This study has been performed to obtain the plastic shrinkage properties of hydrophilic fiber reinforced mortar and concrete. The results of tests of the hydrophilic fibers were compared with plain and polypropylene fibers. Test results indicated that hydrophilic poly vinylalcohol fiber reinforcement showed an ability to reduce the total crack area and maximum crack width significantly( as compared to plain and polypropylene fiber reinforcement).