http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤장완,안용호,정길조,한병성 한국조명전기설비학회 2002 조명·전기설비학회논문지 Vol.16 No.4
Measurement of ground resistance is the basic and important procedure to evaluate the proriety of grounding systems performance. In the field, however, it is not an easy task to measure ground resistance accurately, because locating a right position of zero potential for accurate GPR(Ground Potential Rise) measurement is very difficult, especially in case of a grounding electrode with large dimension. In this paper, the estimation method of ground resistance by analysing earth surface potential distribution around the grounding electrodes has been described. 접지저항의 측정은 접지계통의 접지성능이 적정한가를 평가하기 위한 가장 기본적이고 중요한 작업이라고 할 수 있다. 그러나 실제 현장에서, 특히 접지극의 크기가 큰 경우일수록 접지저항을 정확히 측정하기란 쉽지 않은데, 이는 정확한 접지전위 측정을 위한 기준전위 점을 찾기가 힘들기 때문이다. 본 논문에서는 접지극 주변에서 측정한 지표면전위를 분석하여 기준전위 점의 위치를 정확히 식별하는 방법과 그 정당성을 제시하였다.
윤장완(J.W Yoon),전명렬(M.R Jeon),오세일(S.I Oh),김명호(M.H Kim) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
본 논문에서는 765㎸ 변전소 건설시 최초로 도입된 시운전 시험을 중심으로 기술하였다. 시운전 시험은 765㎸ 초기 가압 및 상업 운전에 대비하여 사전에 문제점을 도출하고, 이에 대한 대책을 강구하기 위한 목적으로 시행되었다. 2004년에 시행한 신가평변전소에 대한 전력계통시험분야의 시운전시험을 중심으로 기술하였다. 기존의 345㎸전력설비와 765㎸전력설비(800㎸GIS, 765㎸M.Tr)의 보호방식 차이에 따른 시험 방법, 시험시 발생된 문제점 및 시험 결과에 대해 기술하였다.
최명호,조병서,이남재,윤장완,한병성 전북대학교 공업기술연구소 1998 工學硏究 Vol.29 No.-
In this paper, the low wattage electronic ballast for double ended 70W metal halide lamp has been investigated. To prevent a physical destruction of lamp from acoustic resonances, the proposed ballast operates at high frequency(200KHz) range square-wave alternating voltage to a metal halide lamp, reduce the start up time of lamp and electric power consumption. Besides ac voltage prevent wearing the one of a pair electrode in arc discharging. As a result, this lamp experiment shows 82W and 0.34A imput power and tube current, respectively. Lamp luminous flux is 5300lm with 82W input power and ballast efficiency is 64.63lm/w. The average starting time and restarting time of lamp are 3.9 min and 4.5 minute, respectively.
스피넬 Li_1-xMn_2O_4(0≤x≤0.075) 의 전기화학적 특성
한태희,이종배,김성호,송재주,윤장완,한병성 전북대학교 공업기술연구소 1998 工學硏究 Vol.30 No.-
The spinel Li_1-_xMn_2O_4 has been synthesized by the solid-state reaction. Li_1-_xMn_2O_4 which includes a mixture of LiOH․H_2O and MnO_2 prepared by preliminary heating at 350℃ for 12hr. Li_1-_xMn_2O_4 fired at temperature range from 750℃ for 48hr. The structure and the electrochemical characteristics of spinel to Li_1-_xMn_2O_4 which is fabricated by changing sintering condition form starting materials are investigated. The cyclic voltammetric measurement was performed using 3 electrode cells. Electrode specific capacity and cycle life behavior were tested in a 3.0~4.2V range at a constant current denstiy of 0.45mA/㎠. To improve the cycle performance of spinel Li_1-_xMn_2O_4 as the cathode of 4V class lithium secondary batteries, spinel phases Li_1-_xMn_2O_4 were prepared at various lithium. The results showed that discharge capacity of Li_1-_xMn_2O_4 varied at lithium quantity decrease with increasing lithium add quantity. The discharge capacities of Li_0.925-Mn_2O_4 and Li-Mn_2O_4 revealed 108 and 117mAg/g, respectively.