RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • 말뚝의 연직재하시험(鉛直載荷試驗)에 의한 지지력(支持力) 결정(決定)에 관한 연구(硏究)

        유정수 ( Ryu Jeong Soo ),김석렬 ( Kim Seog Yeol ) 한국농공학회 1990 韓國農工學會誌 : 전원과 자원 Vol.32 No.2

        The static pile load test is carried out to determine the ultimate bearing capacity of a test pile, in which is general processes consist of applying increments of static load to the test pile and observing the time-load-settlement curve recorded at each stage of loading and reloading. Although the pile load test provides various informations to predict the ultimate load of the pile, it has the considerable difficulty of requring a large amount of weight to enable the test pile to be loaded satisfactorily until the ultimate load is obtained. And also the conventional methods to determine the ultimate load, such as Bulter & Hoy’s method, etc., cannot give the accurate ultimate load, especially when the test pile was not satistactorily loaded up to the ultimate load. Therefore in the present study the conventional methods are investigated and compared with the Chin’s method, which furnishes more accurate results. The results obtained from this study are as follows : 1. For the load-settlement curve which has a small bearing capacity and an inflection point there is no problem for using the conventional methods to determine the ultimate load of pile. 2. The ultimate load by Van der Veen’s method is large than that of Terzaghi at the settlement of 25.4 mm, while for the allowable bearing capacity the former is smaller than the latter. 3. For the load-settlement curve showing the trend of progressive failure above the settlement of 25.4 mm, Chin’s method based on the mathematical theory is suitable for determining the ultimate load. 4. When the settlement of pile is less than 25.4 mm and the load settlement curve shows progressive failure, so that Terzaghi’s theory for the ultimate load of pile cannot be employed, it is recommended that Chin’s method be used in determining the ultimated load.

      • KCI등재후보

        중,고등학생의 신체에 대한 평가와 신체존중감이 식이태도에 미치는 영향 -남녀 차이를 중심으로-

        유정이 ( Jeong Yi Ryu ),홍지영 ( Ji Young Hong ) 서강대학교 학생생활상담연구소 2011 人間理解 Vol.32 No.2

        본 연구는 중·고등학생을 대상으로 신체에 대한 평가, 신체존중감, 식이태도와의 관계를 남녀차이를 중심으로 밝혀보고자 하였다. 연구대상은 서울, 인천, 경기도 소재의 중·고등학생 268명(중학생 112명, 고등학생 156명, 남학생 90명, 여학생 178명)이었다. 신체에 대한 평가란 체질량지수(BMI), 실제 체질량지수와 바라는 이상적 체질량지수의 차이(BMI 차이)로 정의하였다. 연구에 사용된 측정도구는 BMI, 신체존중감 척도, 식이태도 척도였다. 각 변인들간의 관계를 알아보기 위해 t- 검정, 다중 회귀분석을 실시하였다. 연구결과 첫째, 성별에 따라 BMI는 차이가 없었으며 BMI 차이, 이상 식이태도 수준은 여학생이 높았고, 신체존중감 수준은 남학생이 높게 나타났다. 둘째, 남학생의 식이태도에 대해서는 BMI 차이가, 여학생의 식이태도에 대해서는 신체존중감이 유의미한 영향을 미치는 것으로 나타났다. 이러한 결과는 식이태도에 대한 교육과 상담에서 남학생과 여학생의 차이를 고려한 접근이 필요함을 시사해준다고 볼 수 있다. 분석결과에 대해 선행연구와 관련하여 논의하고, 연구의 의의와 한계 및 후속연구를 위한 제언을 제시하였다. This study examined whether gender differences would exist in the relationships between body evaluation and body esteem and eating attitude among middle and high school students. Two hundred sixty-eight students (112 middle school students, 178 females) rated their body on the Body Mass index (BMI) and the Body Esteem Scales and their eating attitude on the Eating Attitude Test for Adolescents. Results indicated that gender differences were significant in terms of difference between real and ideal BMI and between real and ideal eating attitude. Body esteem of females and difference between real and ideal BMI among males significantly predicted eating attitude. These results suggest that gender differences should be considered in counseling these students on eating attitude. Implications for practice and future research are discussed.

      • KCI등재

        정부의 역할이 기업의 제품혁신에 미치는 영향 분석: 기업의 규모에 따른 차이를 중심으로

        유정민(Ryu, Jungmin),한승혜(Han, Seunghye) 서울행정학회 2020 한국사회와 행정연구 Vol.30 No.4

        기업의 혁신활동은 개별 기업의 생존 및 경쟁력 확보 수단일 뿐 아니라 국가 전체의 혁신역량에도 주요한 부분을 차지한다. 따라서 정부는 여러 정책을 통해 기업의 혁신활동을 지원하고 있다. 그러나 각 기업의 규모에 따라 각자 보유한 자원이나 처하게 되는 환경은 크게 달라지기 때문에 동일하게 정부의 지원 정책을 시행해도 그 영향은 다르게 나타날 수 있다. 본 연구에서는 정부가 기업의 혁신을 지원하기 위해 시행한 다양한 정책이 기업에게 미치는 영향을 살펴보고, 각 정책이 대 · 중 · 소기업에 대해 어떠한 영향을 주는지를 확인하고자 하였다. 분석에는 한국기업혁신조사의 2016년 자료를 활용하였으며, 정부의 재무적 지원, 규제개혁, 정보의 제공 및 협력 파트너로서의 역할이 기업의 제품혁신에 미치는 영향을 확인하기 위해 로지스틱 회귀분석을 실시하였다. 분석 결과, 정부의 혁신 지원정책은 기업의 규모에 따라 다르게 영향을 미치고 있었다. 재무적 지원의 경우 자금 환경이 취약한 소기업에게는 긍정적이나 중기업 이상에서는 오히려 역효과를 가져왔다. 규제개혁은 대기업이나 중기업에 긍정적으로 작용하는 반면 규제의 보호를 받는 소기업의 혁신은 저해하였다. 정부 정보의 활용은 중기업에는 긍정적이었지만, 소기업의 경우 부정적인 영향을 미치고 있었으며, 정부와의 협력은 대기업을 제외한 중소기업 모두에 긍정적인 영향을 주고 있었다. 이러한 결과는 혁신을 추동하기 위해서 각 기업의 규모나 처한 상황에 맞게 적절한 정책이 설계되는 것이 바람직함을 시사한다. Since the innovative activities have a positive impact on not only the means of survival and competitiveness of individual companies but also on the capacity of innovation across the country, the government supports the innovation of the entity through various policies. However, depending on the size of each company, the resources they own or the environment they face vary greatly. Therefore, even if the same policy is implemented, the impact may be different. In this study, we wanted to identify the effects of various policies implemented to support the innovation and, in particular, whether they had different effects on large, medium and small businesses. To achieve this objective, we used the 2016 data of the Korean Innovation Survey were utilized and conducted a logistic regression. The analysis showed that the impact of each government support policy on the innovation of a company’s products is different for large, medium and small businesses. Financial support may be positive for small businesses with a weak financial environment, but it has backfired to medium-sized businesses. Regulatory reforms have been positive for large businesses or medium-sized businesses, while they have hampered innovation by small businesses protected by regulations. The use of government information was positive for medium and small businesses, and the cooperation with the government was positive for small businesses. These results suggest that appropriate policies should be designed to suit the size or circumstances of each firm in order to drive innovation.

      • KCI등재

        안정성은 사람들의 혁신 수용성을 높이는가?

        유정민(Jung Min Ryu),최영준(Young Jun Choi) 한국혁신학회 2020 한국혁신학회지 Vol.15 No.3

        과학기술이 급격하게 발전함에 따라 여러 사회적 변화가 발생되고 있다. 누군가에게는 이러한 변화가 기회로 여겨지지만 다른 누군가에게는 위협으로 인식되기도 한다. 그렇다면 이러한 개인의 인식 및 태도에 영향을 미치는 요소는 무엇인가? 본 연구의 핵심은 개인이 소득 및 고용의 불안정성을 경험했는지 여부가 미래에 대한 예측에 어떠한 영향을 미치는지를 밝히는 것이다. 분석을 위하여 2018년 기준 19~69세의 한국인이 응답한 서베이 데이터를 사용하였으며, 774명의 응답을 분석하였다. 분석 결과, 소득 및 고용 불안정성을 경험하지 않음으로써 얻어지는 안정성이 기술혁명 사회에 대하여 긍정적으로 예측하도록 하는 것으로 나타났으며 현재 숙련도가 높은 업무를 하고 있다고 느낄수록 미래에 대하여 긍정적으로 예측함을 확인하였다. 반면, 전문가들의 예상과는 달리 자신의 직업이 반복적인 것은 기술혁명 사회의 예측에 유의미한 영향을 미치지 못하였다. 이러한 결과들은 개인이 경험하는 불안정성이 현재의 삶뿐만 아니라 기술혁명으로 인한 미래의 삶에 대한 인식 및 수용성에도 영향을 미치고 있음을 의미하며, 이와 연관된 정책적 접근이 필요함을 시사한다. The rapid development of science and technology has caused important socio-economic changes. These changes are seen as an opportunity for some, but regarded as a threat for others. Then, which factors affect people’s positive or negative attitudes towards technological change and innovation? The aim of this paper is to reveal whether experiences of income or employment instability have a negative impact on individuals’ forecast of the future. For the analysis, we use the survey data on 774 Koreans aged 19 to 69 in 2018. The result shows that people without experiencing income or employment instability tend to have a positive prediction for the impact of technological change on their lives and job. Also, people who felt that they were doing highly skilled work are likely to be more positive about the future. These results indicate that the insecurities experienced by individuals affect not only their own lives, but also the acceptance of innovation and technological changes. Therefore, we draw policy implications that inclusive social policy should be established to promote innovation without societal conflicts.

      • KCI등재

        낙동강 하류의 정수처리 공정에서 Haloacetamides 생성 및 거동: 하절기와 동절기 비교

        유정문(Jungmoon Ryu),설현주(Hyunjoo Seol),손희종(Heejong Son) 대한환경공학회 2022 대한환경공학회지 Vol.44 No.4

        목적: 낙동강 하류에 위치한 정수장의 정수처리 공정별로 질소계 소독부산물인 haloacetamides 생성 특성과 거동을 하절기와 동절기로 나누어 평가하였다. 점진적으로 강화되는 소독부산물 기준에 대비하여 정수장 운영에 대한 기초자료로 활용하고자 하였다. 방법: 낙동강 하류에 위치한 대형 정수장(180,000 m³/일)을 대상으로 하절기(7~8월)와 동절기(12~1월)에 유입 원수부터 최종 정수까지 HAcAms 7종을 모니터링 하였다. 액액추출법을 이용하여 시료를 추출하였고, HAcAms 분석에는 GC-MS/MS를 이용하였다. 결과 및 토의: 하절기와 동절기에 정수장에서 전염소 처리에 의한 HAcAms 생성농도는 각각 9.4~27.2 ㎍/L 및 1.4~3.5 ㎍/L였으며, 하절기가 동절기에 비해 7.7배 정도 높았다. HAcAms/TOX 농도비가 동절기의 0.01~0.02에 비하여 하절기에는 0.09~0.14로 나타나 전염소 처리에 의해 생성된 소독부산물 중에서의 HAcAms 구성비율이 하절기에 급격히 증가하였다. 전염소 처리에 의해 하절기에는 DCAcAm, BCAcAm, TCAcAm, DBAcAm, BDCAcAm 5종이 생성되었으며, 동절기에는 DCAcAm, BCAcAm, DBAcAm, DBCAcAm, TBAcAm 5종이 생성되었다. 전염소 처리에 의해 생성된 HAcAms 중에서 di-HAcAm종들의 비율이 하절기와 동절기에 각각 91%와 66%를 차지하였으며, DCAcAm의 생성농도가 가장 높게 나타났다. 회분식 생물분해 실험에서 HAcAms종들의 생물분해가 용이한 것으로 평가되었으며, 실험실 규모 BAC 공정(수온 20℃, EBCT 10~30분)에서 di- 및 tri-HAcAms종들의 제거율은 각각 75~99% 및 85~100%로 나타났다. 하절기와 동절기에 정수장의 BAC 공정에서 HAcAms에 대한 제거율은 평균 81%와 54%였으며, 최종 처리수에서의 HAcAm 검출농도는 하절기 1.7~2.4 ㎍/L, 동절기 0.7 ~ 1.2 ㎍/L 범위로 하절기가 동절기에 비해 2배 정도 높게 나타났다. 결론: 하절기에는 전염소 처리에 의해 HAcAms 생성농도가 동절기에 비해 높았으나 BAC 공정에서 용이하게 제거되었다. 반면 동절기에는 전염소 처리에 의해 HAcAms 생성농도는 낮았으나 BAC 공정에서의 제거율이 54% 정도로 저조하였다. 정수장에서 HAcAms의 주요 제거공정과 제거기작은 BAC 공정의 생물분해였으며, 실험실 규모로 수행된 BAC 공정 모의실험에서 HAcAms 생성농도가 높은 하절기에는 EBCT를 30분 이상으로 증가시켜 운전하면 95% 이상의 제거율을 기대할 수 있었다. Objectives : The formation characteristics and fate of haloacetamides (HAcAms), nitrogenous disinfection by-products (DBPs), were evaluated for each process in a drinking water treatment plant (DWTP) located downstream of the Nakdong River in summer and winter. In preparation for the gradually strengthening rules for DBPs, it was intended to be used as basic data for operating DWTPs. Methods : Seven HAcAms were monitored from the raw water to the clean water in the summer (Jul.∼Aug.) and winter (Dec.∼Jan.) at a large DWTP (180,000 ㎥/day) located downstream of the Nakdong River. Liquid-liquid extraction (LLE) method was used for sample extraction and GC-MS/MS was used for HAcAms analysis. Results and Discussion : The concentrations of HAcAms formed by the pre-Cl₂ treatment in the DWTP in summer and winter were 9.4~27.2 ㎍/L and 1.4~3.5 ㎍/L, respectively, and were 7.7 times higher in summer than in winter. The HAcAms/TOX concentration ratio was 0.09~0.14 in summer compared to 0.01~0.02 in winter, and the HAcAms composition ratio among DBPs formed by the pre-chlorination increased rapidly in the summer. Five species of DCAcAm, BCAcAm, TCAcAm, DBAcAm, and BDCAcAm were formed in summer by the pre-chlorination, and five species of DCAcAm, BCAcAm, DBAcAm, DBCAcAm, and TBAcAm were formed in winter. The composition ratio of di-HAcAm species accounted for 91% and 66% in summer and winter, respectively, and the DCAcAm concentration was highest compared to other HAcAms species. In the batch biodegradation experiment, it was evaluated that the biodegradation of the HAcAms species was easy, and in the laboratory scale BAC process experiment (water temp. 20℃, EBCT 10~30 min.), di- and tri-HAcAms removal rate were 75~99% and 85~100%, respectively. In summer and winter, the removal rates of HAcAms in the BAC process of the DWTP were 81% and 54% on average, respectively. The HAcAm detection concentrations in the clean water ranged from 1.7 to 2.4 ㎍/L in summer and 0.7 to 1.2 ㎍/L in winter, which was twice as high in summer as was compared to winter. Conclusion : The formation concentration of HAcAms was higher than in winter by pre-chlorination, but it was easily removed in the BAC process in summer. However, in winter, the formation concentration of HAcAms was low by pre-chlorine treatment, but the removal rate in the BAC process was as low as 54%. The main removal process and mechanism of HAcAms in the DWTP were the BAC process and biodegradation. In a lab-scale BAC process simulation, a removal rate of more tthan 95% removal efficiency could be expected with the increase of EBCT to 30 minutes when HAcAms was highly formed in summer.

      • KCI등재
      • KCI등재

        규제의 영향 인식과 혁신 활동과의 연관성 분석 : 규제의 유형에 따른 차이를 중심으로

        유정민(Jungmin, Ryu) 한국규제학회 2020 규제연구 Vol.29 No.2

        시대의 흐름에 따라 혁신의 중요성이 점차 증대되어 오면서 규제에 관해서도 많은 논의가 이루어지고 있다. 규제는 사회의 질서를 유지하기 위한 정부의 정책수단으로서 혁신의 주체인 기업 혹은 개인의 행위에 관여함으로써 혁신에 영향을 미친다고 알려져 있기 때문이다. 흔히 규제는 혁신의 장애물로서 묘사되지만, 규제가 오히려 혁신을 추동하는 역할을 할 수 있다는 주장 및 증거들도 존재한다. 그렇다면 국내 제조업과 서비스업 분야 기업들은 규제를 어떻게 인식하며, 혁신활동에는 어떠한 영향을 받고 있는가? 본 연구에서는 이러한 질문에 답하기 위하여 규제의 인식과 혁신활동 간의 연관성을 분석하고자 하였다. 구체적으로 분석하기 위하여 규제를 유형화하였으며 제품혁신 활동에 한정하여 연관성을 살펴보았다. 규제 유형별 인식 분포에 따르면, 기업들은 비기술형 사회적 규제에 대해서는 혁신을 저해하였다고 응답한 비율이 더 높았으며 기술형 사회적 규제에 대해서는 혁신을 촉진했다고 응답한 비율이 더 높았다. 또한 규제 유형별 인식과 실질적인 제품혁신 활동을 분석한 결과, 독과점규제, 가격규제, 진입규제, 그리고 환경규제에서는 괴리가 확인되었으며 소비자안전규제, 지적재산권보호, 노동규제에서는 각 규제에 대한 인식대로 제품혁신 활동에 유의미한 영향을 받고 있었다. 이러한 결과는 규제의 유형별로 혁신에 대한 인식 및 실질적인 영향이 달라짐을 의미한다. 또한 본 연구에서는 규제가 혁신에 미치는 영향을 피규제자가 규제에 대응하는 방식으로서 혁신을 선택하거나 포기하는지 여부로 접근하였으며, 이러한 결과는 규제정책과 혁신정책 모두에 시사점을 제공한다. As the importance of innovation has gradually increased with the passage of the times, many discussions have been made on regulation. This is because regulation is known to affect innovation by engaging in the actions of companies or individuals that are the subject of innovation as the government"s policy tool for maintaining social order. While regulation is often described as an obstacle to innovation, there are also arguments and evidence that regulation can play a role in driving innovation. So how do the domestic manufacturing and service industries recognize regulations and how do regulations affect innovation activities? To answer the question, this study attempted to analyze the relationship between regulatory recognition and innovation activities. To analyze it in detail, regulations were categorized and the relevance was examined only for product innovation activities. According to the recognition distribution by type of regulation, companies tended to respond that they had hampered innovation by non-technology type social regulations and that they had promoted innovation by technology type social regulations. Also, as a result of analyzing the recognition of each type of regulation and the actual product innovation activities, discrepancies were identified in the monopoly regulation, price regulation, entry regulation, and environmental regulation. On the other hand, consumer safety regulation, intellectual property rights protection, and labor regulation significantly influenced product innovation activities, as perceived by each regulation. These results mean that the recognition and practical impact of innovation varies depending on the type of regulation. Also, in this study, the effect of regulation on innovation was approached by whether the companies choose or give up innovation as a way to respond to regulation, and these results provide implications for both regulatory and innovation policies.

      • KCI등재

        국내 교육 ODA의 연구 동향: UN의 국제개발목표 변화를 중심으로

        유정민 ( Ryu¸ Jeongmin ),조태준 ( Cho¸ Taejun ) 한국인력개발학회 2020 HRD연구 Vol.22 No.4

        본 연구는 국내 교육 ODA 전체적인 연구 동향과 UN의 국제개발목표에 따른 동향 변화를 확인하고자 하였다. 이를 위해 텍스트 네트워크 분석을 사용하였으며, 기존 초록 또는 키워드 중심의 분석 연구와 차별적으로 결론 및 시사점 부분 또한 포함하였다. 본 연구의 결과는 다음과 같다. 첫째, 전체적인 연구 동향 분석결과, 교육훈련, 사업, 프로그램, 평가, 효과, 피교육생 등의 단어가 주로 나타났다. 이는 국내 교육 ODA 연구가 HRD 관련 주제를 중점으로 이루어졌다는 것을 의미한다. 둘째, UN 개발목표의 변화에 따라, MDGs 시기에는 특정 수혜국을 대상으로 하는 기초교육 사업에 관한 연구가 주로 이루어졌으며, SDGs 시기에는 직업 및 역량교육이라는 HRD 분야에 더욱 집중하는 경향이 나타났다. 셋째, SDGs에 부합하는 연구가 많이 진행되었으나, 목표 중 하나인 여성 인권 분야에서 부족함이 있었다. 교육 ODA가 여성 인권 신장에 실질적인 도움을 줄 수 있다는 점에서, 향후 이 분야에 대한 더 많은 연구가 요구된다. 또한, 교육 ODA 연구가 전반적으로 결과 평가에 의존하는 경향이 있어, 향후 연구는 설계 및 과정 부분에 대한 논의가 필요하다. This study attempted to identify the research trends of educational Official Development Assistance (ODA) in Korea. Moreover this study attempted to verify whether educational ODA in Korea was coping with United Nations’Millennium and Sustainable Development Goals (MDG/SDG). This study could be distinguished with other researches, because it included not only abstracts and key words, but also conclusions and implications of educational ODA researches for text networking analysis. The results of the study are as followed. First, the most frequently appeared words for the overall research trends were training & development, project, program, evaluation, effect, and trainees, which could be referred that many Korean education ODA researches were related with HRD topics. Second, in MDGs period, the researches were mainly focused on basic and primary education projects on specific countries, whereas in SDGs period, mostly on vocational and competency education. Third, even though women’s rights is important issue in SDGs, there was few studies related to this issue. Since educational ODA can be the most influencial factors for improving women’s right, it needs to be encouraged to research more. Lastly, most studies were mostly focused on results of educational ODA projects, so it needs to be expanding the research area to project design and operational processes.

      • KCI등재

        국어과 이해중심 교육과정 실행을 위한 자료·정보 활용 역량 단원 개발 - 다문화교육과 연계한 ‘발표하기’를 중심으로 -

        유정오 ( Ryu¸ Jung O ) 한국초등국어교육학회 2021 한국초등국어교육 Vol.71 No.-

        본 연구는 다문화교육과 연계한 ‘발표하기’를 중심으로, 국어과 이해중심 교육과정 실행을 위해, 백워드 설계 모형 기반 국어과 자료·정보 활용 역량 단원 개발을 목적으로 한다. 이를 위해 선행연구 및 이해중심 교육과정 관련 이론 고찰, IPA 기법 활용 다문화교육 요소의 중요도-실행도 분석, 국어과 교육과정 분석 등을 통해 연구 기반을 형성하였다. 그리고 이해중심 교육과정이 지향하는 학습자의 ‘진정한 이해’에 도달하기 위해 백워드 설계 절차에 따라 다문화교육과 연계한 국어과 자료 정보·활용 역량 단원을 설계하였다. 이어서 단원 설계 사이클 3단계에 따라 단원 설계(안)에 대한 타당도 검증을 시행하였다. 교육 전문가 35명을 대상으로 타당성 검증 설문을 시행한 결과 CVR 값이 설계 기준 모든 항목에서 기준값(0.31)을 초과하여 타당성을 확인하였다. 학습자의 ‘진정한 이해’를 추구하는 이해중심 교육과정 철학에 기반하여, 다문화교육과 연계한 ‘발표하기’를 중심으로 국어과 자료·정보 활용 역량 단원을 설계한 본 연구가 학교 현장의 이해중심 교육과정 실행에 보탬이 되기를 기대한다. This study aims at the data·information utilization competency unit design based on a backward design model for understanding by design in Korean language education, focused on presentation in connection to multicultural education. For this purpose, this study established a research base through discussions on the preceding studies and understanding by design-related theories, importance-performance analysis of multicultural education elements, utilizing the IPA technique, and analysis of the Korean language education curriculum. Furthermore, to achieve the ‘enduring understanding’ of learners understanding by design aims at, the data·information utilization competency unit in Korean language education was designed according to the backward design procedures in connection to multicultural education. Next, according to the three steps of the unit design cycle, a test of the validity of the unit design(draft) was conducted. A survey for the test of the validity conducted with 35 education experts revealed that the CVR value exceeded the reference value (0.31) in all items of the design standards, which confirmed the validity. Hopefully, this study would help implement the understanding by design in schools, which designed the data·information utilization competency unit, focused on ‘presentation’ in connection to multicultural education, based on the philosophy of understanding by design that pursues the ‘enduring understanding’ of learners.

      • KCI등재

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼