http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
모델 챔버 dome 각에 따른 유동형태 변화에 관한 실험적 연구
유경원(Gyong Won Ryu),김용련(Yeong Ryeon Kim),김홍집(Hong Jip Kim) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.5
가스터빈 연소기 dome은 주 연소영역에 필요한 공기를 유입시키는 역할을 수행한다. 주 연소영역에서의 유동형태는 스월러, dome 각, 주 공기공에서 분출되는 공기 제트, 화염에 의한 열전달, 분무된 연료의 상변화 등 여러 인자에 의해 복합적으로 형성된다. 스월러는 주 연소영역의 유동형태를 지배하는 대표적인 인자로 주 연소영역내에 강한 재순환영역을 형성시켜 연료와 공기의 혼합을 촉진시키고 화염을 보염시키는 역할을 수행한다. 본 연구는 dome 각의 변화가 스월러 유동에 미치는 영향을 이해하고자 스월러가 조립된 상압 모델 챔버 및 PIV(Particle Image Velocimetry)를 이용하여 실험적으로 고찰한 것이다. The Dome of gas turbine combustor rolls that the primary air flows through it to primary combustion zone. The flow pattern at dome region is very complex and governed by swirler, dome shpae, jets from primary dilution holes, heat transfer from flame and so on. Among them, the swirler is the major component to control the flow pattern near dome region. Swirler generates strong air recirculation inside the primary combustion zone and mixs fuel and air by recirculation. This experiments was performed to understand the effect of dome shape variation to swirl flow patterns inside a model chamber using PIV(Particle Image Velocimetry) technique.
스월러 유량비 및 플레어 출구길이가 모델 챔버내 유동에 미치는 영향에 대한 실험적 연구
유경원(Gyong Won Ryu),김용련(Yeong Ryon Kim),김홍집(Hong Jip Kim) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.11
스월러는 가스터빈 연소기내에 재순환영역을 형성시켜 보염역활을 수행하는 기구로 스월러에 의해 형성된 유동패턴은 연소실내 화염의 분포, 연소 효율, 배기가스등의 연소기성능을 크게 좌우한다. 본 연구에서는 counter-rotating 스월러에 대해 레이저입자유속계 (Particle Image Velocimetry)를 이용하여 바깥쪽 스월러와 안쪽 스월러의 유량비가 다른 2종의 스월러 대한 스월러 양단 압력차 변화 및 플레어 길이비에 따라 변화하는 모델 챔버내의 유동형태를 실험적으로 고찰한 것으로, 실험결과 바깥쪽 스월러의 유동은 주 재순환영역(Central Toroidal Recirculation Zone)의 형태를, 안쪽 스월러의 유동은 스월러 벤튜리 출구에서의 재순환유동 강도에 영향을 미침을 알 수 있다. 바깥쪽 스월러의 유량이 많은 경우 플레어의 끝단 길이비에 따라 CTRZ 및 CRZ(Corner Recirculation Zone)의 형태를 제어할 수 있음을 알 수 있었다. Swirler plays as an flame holder generating recirculation regions and control the flame distributions, combustion efficiency, and characteristics of exhaust gas. This experiments was performed to find out the effect of mass flowrate ratio effect of inner/outer swirler flow area with counter-rotating swirler and flare exit length to flow patterns inside a model chamber using PIV(Particle Image Velocimetry) technique. As a result, outer swirler flow control CTRZ(Central Toroidal Recirculation Zone) and inner swirler flow control the strength of recirculation above swirler venturi exit. CTRZ and CRZ(Corner Recirculation Zone) are controlled by flare exit length when outer swirler has large mass flowrate.
스월러 플레어 출구길이가 모델 챔버내 유동에 미치는 영향에 대한 실험적 연구
유경원(Gyong Won Ryu),진유인(Yu In Jin),김용련(Yeong Ryon Kim),김홍집(Hong Jip Kim) 한국추진공학회 2016 한국추진공학회지 Vol.20 No.6
A swirler is a flame holding device generating recirculation regions in a gas turbine combustor, and the flow pattern due to a swirler has major effects on the flame distributions, combustion efficiency, and characteristics of exhaust gas. An experimental study for a counter-rotating swirler has been conducted to find out effects of the mass flow rate ratio of the inner/outer swirler flow area, the pressure difference between the swirler inlet and outlet, and the flare exit length ratio on the flow patterns in a model combustion chamber by using PIV(Particle Image Velocimetry) technique.
가토에서 이옥틸시아노아크릴레이트접착제와 8-0 폴리글락틴봉합사를 이용한 결막봉합법의 비교
류원열,유경원.Won-Yeol Ryu. M.D.. Kyung-Won Yoo. M.D. 대한안과학회 2005 대한안과학회지 Vol.46 No.5
Purpose: To evaluate the clinical efficacy and the histopathologic tolerance of 2-octylcyanoacrylate versus 8-0 polyglactin sutures for conjunctival wound closure in rabbits. Methods: We performed an experimental study on 16 eyes of eight New Zealand albino rabbits. Conjunctival peritomy of 8 mm was done in the superior limbus followed by extensive subconjunctival dissection in both eyes. The eyes of the rabbits were divided into two groups. The conjunctiva was then attached to the limbus again by the proposed 2-octylcyanoacrylate adhesive (left eye, Group A) or 8-0 polyglactin suture (right eye, Group B). The clinical efficacy of the closure of the conjunctival wound, either with sutures or adhesives, and the clinical and histopathologic tolerances such as hyperemia, discharge, residual adhesive or suture, inflammatory change and fibrosis were observed at 1 day and at 1, 2, 4 and 6 weeks after surgery. Two rabbits were sacrificed at each of 1, 2, 4 and 6 weeks, and specimens of their conjunctiva were examined histologically. Results: Both conjunctival surgical closure methods were found to be equally efficacious in fixing the conjunctiva to the limbus. There were no significant clinical or histopathologic tolerance differences between the two groups. The conjunctiva at 6 weeks of Group A showed nearly normalized morphology with disappeared inflammatory cells and fibroblasts, whereas those of Group B showed foreign body inflammatory reaction around the absorbing suture materials. Conclusions: 2-Octylcyanoacrylate adhesive was an efficient conjunctival closure method and was very well tolerated by the ocular surface. 2-Octylcyanoacrylate may be a possible tissue adhesive for conjunctival wound closure.