http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
성민선,원광우 가톨릭대학교 학생생활상담소 1990 聖心生活 Vol.9 No.-
대학생은 청소년에서 성인으로 넘어가는 과도기에 위치한다. 이 시기는 신체적인 측면에서 성장이 거의 끝나 성인과 다를바 없으나 심리적, 사회적, 경제적인 측면에서 볼 때 아직 미성숙한 부분이 많은 때이다. 특히 오늘날 대부분의 대학생은 고등학교 기간동안 완전한 자아 정체감을 형성하지 못한 채 대학입학과 더불어 많은 시간과 자유를 얻고 새로운 환경과 사람틀을 만남으로서 여러가지 갈등을 겪고 있다. 또한, 한 인간으로서 독립하고 성장하기 위한 많은 발달 과업상의 문제에 직면하게 되어 이에 대한 결정과 책임을 감수해야 하는 어려움을 겪고 있다. 따라서 학생들이 원만하고 성숙한 대학생활을 영위할 수 있도록 본 연구소가 활동하기 위해서는 본교생을 대상으로 본교생이 지니고 있는 문제에 대한 조사가 필요하리라 본다. 이에 본 연구는 본교 재학생들이 문제라고 느끼고 있는 일반적인 문제 및 그 일반적인 문제 가운데 정도가 심각한 문제라고 생각하는 개인적인 문제를 파악하려는 목적과 함께 나아가서 이들 문제에 대한 파악을 토대로 대학생들의 적응과 성장에 도움이 될 수 있는 방안을 모색함으로써 효과적인 학생지도와 연구소 프로그램 활동에 반영시키고자 한다.
Development of Non-Lubricated Die for Magnesium Sheet Forming of Car Body Part
남재두,강충길,차승훈,안민수,서판기,원광우 한국정밀공학회 2014 International Journal of Precision Engineering and Vol. No.
According to current development trends for automotive body parts, light weight is a key issue in improving fuel efficiency and CO2reduction. Compared to steel and aluminum, magnesium has a relatively low specific gravity. However, it is challenging to usemagnesium to produce a product at room temperature because magnesium has a Hexagonal Close-Packed (HCP) crystal structure. Therefore, the structure is not suitable for plastic deformation without using a heating system. As a result, a magnesium sheet anddie need to be heated from 250 to 300ºC. Unfortunately, this procedure has positive and negative effects. It increases not only thematerial’s elongation, but also the friction between the material and die during warm forming. Furthermore, lubricant cannot be useddue to corrosion occurring on the surface of a part after manufacturing. To overcome these challenges, we developed a “Partitionpanel,” which is a warm-formed part with a non-lubricated die with a Diamond-Like Carbon (DLC) coating. A one-quarter sizedprototype was successfully produced with the DLC-coated non-lubricated die, and its characteristics were verified through anevaluation of the friction coefficient and mechanical properties.