http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고분자 기판과 PECVD 절연막에 따른 ITZO 박막 트랜지스터의 특성 분석
양대규,김형도,김종헌,김현석,Yang, Dae-Gyu,Kim, Hyoung-Do,Kim, Jong-Heon,Kim, Hyun-Suk 한국재료학회 2018 한국재료학회지 Vol.28 No.4
We examined the characteristics of indium tin zinc oxide (ITZO) thin film transistors (TFTs) on polyimide (PI) substrates for next-generation flexible display application. In this study, the ITZO TFT was fabricated and analyzed with a SiOx/SiNx gate insulator deposited using plasma enhanced chemical vapor deposition (PECVD) below $350^{\circ}C$. X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectroscopy (SIMS) results revealed that the oxygen vacancies and impurities such as H, OH and $H_2O$ increased at ITZO/gate insulator interface. Our study suggests that the hydrogen related impurities existing in the PI and gate insulator were diffused into the channel during the fabrication process. We demonstrate that these impurities and oxygen vacancies in the ITZO channel/gate insulator may cause degradation of the electrical characteristics and bias stability. Therefore, in order to realize high performance oxide TFTs for flexible displays, it is necessary to develop a buffer layer (e.g., $Al_2O_3$) that can sufficiently prevent the diffusion of impurities into the channel.
전자 사이클로트론 공명 플라즈마와 열 원자층 증착법으로 제조된 Al<sub>2</sub>O<sub>3</sub> 박막의 물리적·전기적 특성 비교
양대규,김양수,김종헌,김형도,김현석,Yang, Dae-Gyu,Kim, Yang-Soo,Kim, Jong-Heon,Kim, Hyoung-Do,Kim, Hyun-Suk 한국재료학회 2017 한국재료학회지 Vol.27 No.6
Aluminum-oxide($Al_2O_3$) thin films were deposited by electron cyclotron resonance plasma-enhanced atomic layer deposition at room temperature using trimethylaluminum(TMA) as the Al source and $O_2$ plasma as the oxidant. In order to compare our results with those obtained using the conventional thermal ALD method, $Al_2O_3$ films were also deposited with TMA and $H_2O$ as reactants at $280^{\circ}C$. The chemical composition and microstructure of the as-deposited $Al_2O_3$ films were characterized by X-ray diffraction(XRD), X-ray photo-electric spectroscopy(XPS), atomic force microscopy(AFM) and transmission electron microscopy(TEM). Optical properties of the $Al_2O_3$ films were characterized using UV-vis and ellipsometry measurements. Electrical properties were characterized by capacitance-frequency and current-voltage measurements. Using the ECR method, a growth rate of 0.18 nm/cycle was achieved, which is much higher than the growth rate of 0.14 nm/cycle obtained using thermal ALD. Excellent dielectric and insulating properties were demonstrated for both $Al_2O_3$ films.
H.264/AVC Adaptive Rounding 양자화 조건에서 조기 AZB 검출방안
양대규(Dae-Gyu Yang),이영석(Young-Seok Lee) 대한전자공학회 2010 대한전자공학회 학술대회 Vol.2010 No.6
In this paper, we propose a new method that detect early AZB(All Zero Block) which has all ‘’coefficient. For H.264/AVC, it’ very important to find the best mode which can lower coded bitrates seriously. However it needs a large number of calculations for mode decision at the same time. So many algorithms are introduced to reduce the calculations. Early detection of AZB is one of them. Our algorithm is to detect AZB based variable offset parameter in condition of adaptive rounding quantization. Merit of new algorithm is to update offset parameter which varied with MB(Marco Block). and the detection capability of AZB is superior to existing algorithm based on fixed offset. And I prove the validity of the proposed algorithm by Simulation.
분층형 유한요소 모델을 이용한 복합재료의 삼차원 기공 탄성 및 파손 해석
양대규(Dae Gyu Yang),임소영(Soyoung Lim),신의섭(Eui Sup Shin) 한국항공우주학회 2017 韓國航空宇宙學會誌 Vol.45 No.2
열분해 현상을 겪는 고분자 복합재료의 내부에서는 기공이 형성되며, 이는 열기계적 거동에 영향을 미칠 수 있다. 본 논문에서는 기공이 형성된 복합재료의 분층형 삼차원 유한요소 모델을 개발하고 이를 이용하여 기공 탄성 및 파손 해석을 수행하였다. 유한요소 모델의 삼차원 확장 효과와 기공이 복합재료 내부에 미치는 영향을 확인하기 위하여 분층수와 기공도에 따른 분층형 유한요소 모델을 사용하였다. 해석 결과로서 유효 탄성 계수 및 기공 탄성 계수는 기공도가 0.5까지 증가함에 따라 최대 74.0%, 442.1%, 분층 수가 5까지 증가함에 따라 최대 98.7%, 37.2% 차이를 보였다. 또한, 초기 및 최종 파손 강도는 기공도에 따라 최대 88.2%, 90.0%, 분층에 따라 최대 87.5%, 171.8%까지 감소함을 확인하였다. Porosity in polymer matrix composites generated during pyrolysis process affect the thermomechanical behavior of the composites. In this paper, multislice finite element models for the porous composite materials are developed, and poroelastic and failure analysis for these models are performed. In order to investigate the three-dimensional effects, finite element meshes are modeled considering different porosity(up to 0.5) and the number of slices (up to five). As a result, effective Young’s moduli and poroelastic parameters exhibit the maximum differences of 74.0% and 442.1% with respect to porosity respectively, and 98.7% and 37.2% with respect to the number of slices. First and last failure strengths are decreased 88.2% and 90.0% with respect to porosity respectively, and 53.8% and 171.8% with respect to the number of slices.
DCT블록을 이용한 인간 시각시스템 기반의 영상 리사이징 알고리즘 개발
양대규(Yang Dae-Gyu),정상현(Jeong Sang-hyeon),서태석(Seo Tae-Seok) 한국방송·미디어공학회 2008 한국방송공학회 학술발표대회 논문집 Vol.2008 No.-
고객의 통신 니즈가 다양해지고 통신 인프라가 대용량, 고속화 되고 단말이 지능화됨에 따라 이를 기반으로 IPTV의 셋탑, 컴퓨터 모니터, 이동통신 핸드폰이 이르기 까지 다양한 화면 사이즈의 단말을 통하여 서비스를 제공하고 있다. 이를 위해 원영상을 화면의 크기에 적합하게 크기를 변환하는 영상 리사이징 기술을 이용하게 되며, 그 방식은 DCT 방식과 공간 방식으로 나눌 수 있다. DCT방식은 원영상의 고주파 영역의 조정하여 크기를 변화하는 방식으로 열화는 최소화되나 DCT 변환을 위한 계산량이 많고 고정 크기 블록을 사용하므로 유연성이 떨어진다. 공간영역은 객관적인 평가에서 품질이 열화되더라도 시각적으로 눈에 민감한 영역의 변화를 최소화하는 것이다. 본 논문은 인간시각시스템을 기반으로 눈의 민간도가 높은 망막 이심율이 작은 영역에서는 DCT블록의 크기를 변화를 최소화시키고 망막이심율이 큰 영역에서는 블록의 변화를 크게 하는 가변 블록방식을 제안한다. 이를 통해 우수한 영상 품질을 확보하면서도 시각적으로 뛰어난 리사이징 영상을 얻을 수 있다.
다공성 복합재의 파손 강도 예측을 위한 미시역학 전산 해석
양대규 ( Dae Gyu Yang ),신의섭 ( Eui Sup Shin ) 한국복합재료학회 2016 Composites research Vol.29 No.2
고온에서 열화학적 분해 현상을 겪는 고분자 기지 복합재료는 기지 내부의 기공도가 급격히 증가한다. 기공의 생성은 재료의 탄성 계수와 파손 강도를 감소시키며, 기공 내부의 가스 압력은 재료의 열기계적 거동에 영향을 준다. 본 논문에서는 기지 내부에 많은 기공이 포함된 일방향 섬유 강화 복합재료의 이차원 대표 체적 요소를 설정하고 유한요소 해석을 수행하였다. 이를 통해 기공 상태에 따른 복합재료의 유효 탄성 계수, 기공 탄성 계수, 파손 강도 등을 산출하였다. 특히, 기지 재료의 특성에 많은 영향을 받는 섬유 수직 방향의 파손 강도가 원래기지 강도보다 현격히 낮게 산출되며, 기공도가 증가함에 따라 지속적으로 떨어지는 경향을 확인하였다. Porosity in polymer matrix composites increases rapidly during thermochemical decomposition at high temperatures. The generation of pores reduces elastic moduli and failure strengths of composite materials, and gas pressures in internal pores influence thermomechanical behaviors. In this paper, micromechanical finite element analysis is carried out by using two-dimensional representative volume elements for unidirectionally fiber-reinforced composites with porous matrix. According to the state of the pores, effective elastic moduli, poroelastic parameters and failure strengths of the overall composites are investigated in detail. In particular, it is confirmed that the failure strengths in the transvers and through-thickness directions are predicted much more weakly than the strength of nonpored matrix, and decrease consistently as the porosity of matrix increases.