http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신기수,안윤애,배종철,정영진,류근호,Shin, Key-Soo,Ahn, Yun-Ae,Bae, Jong-Chul,Jeong, Yeong-Jin,Ryu, Keun-Ho 한국정보처리학회 2001 정보처리학회논문지D Vol.8 No.2
이동객체는 시간에 따라 공간 객체의 위치 및 영역이 연속적으로 변경되는 시공간 데이터이다. 기존의 데이터베이스 시스템을 이용하여 시공간 이동 객체를 관리할 경우 다음의 두 가지 문제점을 가진다. 첫째, 시간에 따라 변화되는 위치 정보에 대한 빈번한 갱신이 발생된다. 둘째, 항상 객체의 현재 상태만이 저장되므로 시공간 이동 객체의 과거와 미래에 관한 정보를 제공하지 못한다. 따라서, 이 논문에서는 빈번한 갱신없이 이동 객체의 이력 정보를 관리할 뿐만 아니라 과거, 현재 그리고 가까운 미래에 관한 모든 위치 정보를 제공할 수 있는 시공간 이동 객체 관리 시스템을 제안한다. 제안 시스템에서 이동 객체 정보는 위치를 나타내는 위치정보와 이동 습성을 나타내는 행위 정보로 구분된다. 특히, 행위정보 변경 처리 알고리즘을 사용하여 최소한의 이력 정보만으로도 모든 객체의 위치 정보를 검색할 수 있는 방법을 제안한다. 그리고, 제안한 방법을 전장 분석 시스템에 적용하여 구현하였으며, 이를 통해 관계형 데이터베이스와 GIS 시스템을 이용하여 실세계의 시공간 이동 객체의 과거 , 현재 및 가까운 미래의 위치 정보를 관리할 수 있음을 알 수 있었다. Moving objects are spatiotemporal data that location and shape of spatial objects are changed continuously over time. If spatiotemporal moving objects are managed by conventional database system, moving objects management systems have two problems as follows. First, update for location information changed over time is occurred frequently. Second, past and future information of moving objects are not provided by system because only current state of objects is stored in the system. Therefore, in this paper, we propose a spatiotemporal moving objects management system which is able to not only manage historical information of moving objects without frequent update, but also provide all location information about past, current, and near future. In the proposed system, information of moving objects are divided into location information for representing location and motion information for representing moving habits. Especially, we propose the method which can search location information all objects by use of changing process algorithms with minimum history information. Finally, we applied the proposed method to battlefield analysis system, as the result of experiment, we knew that past, current, and near future location information for moving objects are managed by relational database and GIS system.
I - Line과 DUV Resist에서 Poly - Si 플라즈마 식각시 미치는 개스의 영향
신기수(Kisoo Shin),김재영(Jae-Young Kim) 한국진공학회(ASCT) 1998 Applied Science and Convergence Technology Vol.7 No.2
256M DRAM급에 해당하는 0.25 ㎛의 회로선 폭을 가공하기 위해 Arc layer & DUV resist 사용이 필수적이다. Poly-Si 식각시 Arc layer 적용여부 및 resist 종류에 따른 차이를 TCP-9408 etcher(Lam Research Co.)에서 Cl₂/O₂, Cl₂/N₂, Cl₂/HBr 3가지 gas chemistry를 변화시키며 조사하였다. 동일한 식각 조건에서 DUV resist 사용의 경우에 I-line resist에 비해 식각 profile이 positive 하고 CD gain도 크게 나왔다. 이것은 resist 손실에 의한 polymer 생성의 증가가 식각시 측벽 보호막을 강화시키기 때문이다. Arc layer 적용의 경우 Arc layer 식각시 생기는 fluorine계 polymer가 poly-Si 식각시 mask 역할을 하므로 CD gain이 증가하는 것으로 나타났다. Gas chemistry에 의한 영향은 Cl₂/O₂의 경우가 식각시 polymer 형성을 촉진시켜 positive profile 및 CD gain을 초래하였다. Cl₂/HBr의 경우에는 profile이 vertical 하였고 CD gain도 거의 없었다. 또한 dense pattern과 isolated pattern 사이의 profile 및 CD 차이도 가장 작게 나타났다. HBr gas 사용이 식각시 pattern density에 따른 측벽 보호막 형성의 불 균일성을 최소화 시켜 양호한 특성을 보여주었다. It is necessary to use Arc layer and DUV resist to define 0.25 ㎛ line and space for 256 M DRAM devices. Poly-Si etching with Arc layer and different resists has been performed in a TCP-9408 etcher with variation of gas chemistries; Cl₂/O₂, Cl₂/N₂, and Cl₂/HBr. DUV resist causes more positive etch profile and CD gain compared to I-line resist because the sidewall passivation is more stimulated by increasing polymerization through the loss of resist. When Arc layer is applied, CD gain also increases due to the polymeric mask formed after etching Arc layer. From the point of gas chemistry effects, the etch profile and CD gain is not improved using Cl₂/O₂ gas, since polymerization is accelerated in this gas. However, the vertical profile and less CD gain is obtained using Cl₂/HBr gas. Furthermore, HBr gas is very effective to suppress the difference of profile and CD variation between dense pattern and isolated pattern by minimizing non-uniformity of side wall passivation with pattern density.
신기수(Gi-Soo Shin),박래방(Rae-Bang Park),권순재(Soon- Jae Kwon) 전력전자학회 1999 전력전자학술대회 논문집 Vol.1999 No.7
A study on simulation using Matlab shows the dynamic condition of a beam on feed-back with encorder. A controller for rapid response interpreted the stability on simulation with pole-placement technique The effect of response was considered feed-back gain, The result of feed-back is described that various feed-back coefficient shows stable controll systems, It would be expected each result according to controllers,
석회석 미분말을 혼입한 시멘트 페이스트의 수화반응 및 역학적 특성 분석에 관한 연구
신기수 ( Shin Ki-su ),방미진 ( Bang Mi-jin ),박기봉 ( Park Ki-bong ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.1
The addition of a limestone filler(LF) to fill into the voids between cement and aggregate particles can reduce the cementitious paste volume. This paper aim to evaluate the influence of LF contents on the hydration kinetics and compressive strength. Hydration kinetics were evaluate using heat of hydration, ignition loss and thermal analysis. The heat of hydration was measured using Isothermal Calorimetry. The degree of hydration was measured using ignition loss. Hydration product analysis was carried out by Thermal Gravimetric and Differential Thermal Analysis. The results show that the addition of LF reduces not only the initial setting time and heat of hydration peak, also degree of hydration and rate of strength development at early age increase with the addition of LF. It can be concluded the LF fills the pore between cement particles due to formation of carboaluminate, which may accelerate the setting of cement pastes.
나노실리카를 첨가한 고강도 모르타르의 자기수축에 관한 연구
신기수(Shin Ki-Su),채훈석(Chae Hun-Suk),신현욱(Shin Hyeon-Uk),유병철(Yoo Byeong-Cheol),박기봉(Park Ki-Bong) 대한건축학회 2009 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.29 No.1(구조계)
This paper presents the results of an experimental study on the influence of nano-silica in the relative humidity and autogenous shrinkage in hardening cement mortar. The water-binder ratio was used 0.3 and two types of mortar were used in this study; mortar made with ordinary portland cement and ordinary portland cement with 3, 7, 10% nano-silica added. The increased autogenous shrinkage, as a consequence of a reduction of relative humidity at early ages.
플라이애쉬와 고로슬래그 미분말을 혼입한 지오폴리머 페이스트의 반응특성 분석
신기수 ( Shin Ki-su ),박기봉 ( Park Ki-bong ) 한국건축시공학회 2020 한국건축시공학회지 Vol.20 No.4
지오폴리머의 반응성은 원재료의 구성성분 및 Si/Al비, Na/Al비, 물-결합재비, 비정질 요소 등을 고려하여 명확한 메커니즘을 규명하는 것은 매우 중요하다. 따라서 원재료 및 알칼리 활성화제의 구성성분을 고려한 %Na<sub>2</sub>O, Ms는 반응성을 결정하는 중요한 요소가 된다. 하지만 다수의 연구에서는 알칼리 활성화제의 농도와 양생 조건 등의 기본적인 요소만을 고려하는 한계점을 나타내고 있다. 따라서 본 연구에서는 %Na<sub>2</sub>O, Ms 및 고로슬래그 미분말의 혼입량에 따른 지오폴리머 페이스트의 강도특성, 반응열, 길이변화, 미세구조 분석을 실시하였다. The addition of a limestone filler(LF) to fill into the voids between cement and aggregate particles can reduce the cementitious paste volume. In previous studies, it has been found that the addition of LF to reduce the cementitious paste volume would substantially increase the compressive strength, and reduce the heat generation. This paper aim to evaluate the influence of LF contents on the hydration kinetics and compressive strength. Hydration kinetics were evaluate using heat of hydration, ignition loss and thermal analysis. The heat of hydration was measured using Isothermal Calorimetry. The degree of hydration was measured using ignition loss. Hydration product analysis was carried out by Thermal Gravimetric and Differential Thermal Analysis. The results show that the addition of LF reduces not only the initial setting time and heat of hydration peak, also degree of hydration and rate of strength development at early age increase with the addition of LF. It can be concluded the LF fills the pore between cement particles due to formation of carboaluminate, which may accelerate the setting of cement pastes.