http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주파수 선택적 페이딩 채널에서 반송파 간섭 부호를 이용한 고성능 MIMO-OFDM 시스템의 성능분석
서완우,정연호,Seo Wan-woo,Chung Yeon-ho 한국정보통신학회 2005 한국정보통신학회논문지 Vol.9 No.8
MIMO (Multiple put Multiple Output) 시스템은 공간적으로 분리된 안테나를 이용하여 공간 다이버시티 이득을 제공하는 고성능, 고용량의 광대역 무선 접속 기술이다. 본 논문에서는 주파수 다이버시티의 이득을 제공하는 다중 반송파 부호 기술인 반송파 간섭 부호 (Carrier Interferometry Code)를 MIMO-OFDM 시스템에 적용하여 성능을 추가적으로 개선하는 반송파 간섭 부호 기반의 MIMO-OFDM 시스템을 제안한다. SPW 시뮬레이션 플랫폼을 이용한 시뮬레이션 분석 결과에 의하면 주파수 선택적 페이딩 채널 환경에서 기존의 MIMO-OFDM 시스템 보다 반송파 간섭 부호를 적용한 MIMO-OFDM 시스템의 성능이 높은 채널 지연 환경에서도 약 4dB까지 개선됨을 알 수 있었다. MIMO system takes advantage of the spatial diversity obtained by spatially separated antennas for high- performance and high-capacity broadband wireless access. In this paper, we propose Carrier Interferometry coded MIMO-OFDM system (MIMO-CI/OFDM) which provides frequency and spatial diversity. One combined diversity gains featly improve the performance of OFDM systems. To perform a performance analysis, we have used SPW platform that provides an easy tool to analyze the performance. The results show that the performance of MIMO-CI/OFDM shows an approximately 4dB gain over the MIMO-OFDM even in highly frequency selective fading channels.
서완우,정연호 한국정보통신학회 2004 한국정보통신학회논문지 Vol.8 No.3
시공간 부호(Space-Time Coding)는 송신부에서 전송신호를 시간영역과 공간영역으로 확장하여 전송하는 기법으로 다이버시티 이득과 부호화 이득을 동시에 얻을 수 있다. 본 논문에서는 SPW(Signal Processing Worksystem) 시뮬레이션 플랫포옴을 이용하여 고속 무선랜 관련 표준안인 IEEE 802.11a 시스템을 기초로 한 연접부호 시공간 OFDM 시스템의 성능 개선을 분석하였다. IEEE 802.11a에 포함된 구속장의 길이가 7인 콘볼루션 부호 대신에, 시공간 블록 부호를 이용한 시스템과 콘볼루션 부호와 시공간 블록 부호를 연접한 시스템을 SPW 시뮬레이션 플랫포옴에서 각각 구현하여 그 성능을 비교하였다. SPW 시뮬레이션 결과에 의하면 데이터율 6Mbps에서 두 부호를 연접한 시스템의 성능이 콘볼루션 부호기를 적용한 IEEE 802.11a 시스템보다 약 5dB 이상 우수한 성능을 보였고 데이터을 12Mbps에서는 6dB 이상의 성능 개선을 얻을 수 있었다. Space-Time Coding(STC) is a technique that utilizes joint correlation of transmitted signals in both time and space domains. Through this approach, diversity and coding gains can be simultaneously obtained. In this paper, we use SPW simulation tool to implement the IEEE 802.11a system. Based on this system, OFDM system with STC and convolutional coder concatenated is implemented. The system performance is analyzed and compared with the performance of the IEEE 802.11a system. The simulation results show that the performance with concatenated codes at a data rate of 6Mbps shows approximately a 5dB gain over the system with the convolutional code only. At a data rate of 12Mbps, the performance with concatenated codes is further improved by approximately 6dB.
고속 무선랜 시스템에서 콘볼루션 부호기 및 터보 부호기를 이용한 성능 비교
서완우,정연호,하덕호 한국정보통신학회 2004 한국정보통신학회논문지 Vol.8 No.2
무선랜 기술은 소규모 공간에서 적은 비용과 낮은 전력으로 고속 데이터 전송을 가능하게 한다. 고속 무선랜 관련 표준안인 IEEE 802.11a 및 ETSI HIPERLAN(High Performance Radio LAN) 규격은 5 ㎓대의 무선주파수를 사용하며 고속 데이터 전송에 적합하고 주파수 효율이 높은 OFDM 방식을 채택하고 있다. 본 논문에서는 SPW 시뮬레이션 플랫포옴을 이용하여 유럽의 무선랜 표준 방식인 HIPERLAN/2를 구현하여 표준안에 포함된 구속장의 길이가 7인 콘볼루션 부호기를 이용한 성능과 콘볼루션 부호기 대신에 샤논 한계에 근접하는 우수한 성능을 가진 코드율이 1/2, 1/3, 1/4인 터보 부호기를 적용하여, 다양한 데이터율을 가지는 HIPERLAN/2 무선랜 시스템의 성능을 비교 분석하였다. 시뮬레이션 결과에 의하면 데이터율이 12 Mbps에서는 터보 코드율이 1/3, 1/4 일 때 콘볼루션 부호기보다 약 3 ㏈ 이상의 우수한 성능 개선을 보였고, 데이터율이 36 Mbps 에서는 코드율이 1/4 일 때 기존의 콘볼루션 부호기보다 약 4 ㏈ 이상 성능이 더 개선됨을 알 수 있었다. WLAN technologies enable high-speed data transmission in a small space with relatively low cost and power. There are two main standardizations regarding WLAN; namely, IEEE802.11a and ETSI BRAN. Two standards use a radio frequency of 5 ㎓ band and employs OFDM as a transmission mode. OFDM is known to provide high-frequency efficiency as well as high-speed data transmission. In this paper, We use SPW simulation tool and implement the HIPERLAN/2 system. Based on the HIPERLAN/2 system in the SPW platform, the system performance is analyzed and compared with turbo codes in place of a convolutional coder of the HIPERLAN/2 WLAN system. The simulation results show that the performance with the turbo codes (rate 1/3 and 1/4) at a data rate of 12 Mbps shows 3 ㏈ gain over the system with the convolutional codes. At a data rate of 36 Mbps, the performance with the turbo codes is further improved by approximately 4 ㏈.
TiCl₄ 농도와 교반강도가 수중 인 제거에 미치는 영향
서완우(Wan Woo Seo),이봉희(Bong Hee Lee),박화수(Hwa Soo Park),김종호(Jong Ho Kim),안종화(Johng Hwa Ahn) 大韓環境工學會 2016 대한환경공학회지 Vol.38 No.3
본 연구는 TiCl₄의 농도(0.25-0.59 mM)와 급속교반속도(100-250 rpm), 완속교반속도(30-60 rpm)의 변화가 인 제거효율에 미치는 영향을 알아보고자 하였다. 응집제 농도가 0.25≤[TiCl₄]≤0.39 mM 범위에서 인 제거 효율은 TiCl₄의 농도가 증가할수록 증가하였으며 처리후 인의 농도는 0.2 mg/L 이하였다. 응집제 농도 0.39 mM, 급속교반속도 100 rpm, 완속교반속도 30 rpm에서 인 제거효율이 약 99%로 가장 높았다. TiCl₄의 농도가 낮을 경우(0.25-0.27 mM) 인제거효율의 편차는 급속교반속도 변화(2-3%)보다 완속교반속도 변화(7-10%)에서 더 민감하였다. This study evaluates the efficacy of titanium tetrachloride (TiCl₄) on phosphorus (P) removal in synthetic wastewater. Jar test experiments were performed at various TiCl₄ concentration (0.25-0.59 mM), and intensities of slow (30-60 rpm) and rapid (100-250 rpm) mixings to determine the conditions at which P removal was most efficient. The P-removal efficiency was highest (about 99%) at TiCl₄ concentration ([TiCl₄])=0.39 mM with rapid-mixing intensity=100 rpm and slow-mixing intensity=30 rpm. The slow-mixing intensity was more sensitive than the rapid-mixing intensity to the P removal efficiency when [TiCl₄] was low (0.25≤[TiCl₄]≤0.27 mM).