RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • 전기도금법에 의한 백금 흑 수광체 제조

        배성호,이상만,이문호,Bae, Seong-Ho,Lee, Sang-Man,Lee, Mun-Ho 한국결정학회 1996 韓國結晶學會誌 Vol.7 No.2

        전기 도금법으로 제조한 백금흑의 형상과 적외선 흡수특성을 XRD, SEM, IR 분광기를 사용하여 조사하였다. 금(Au)이 입혀진 알루미나 유리기판 위에 pH 1.0∼1.5에서 1∼5분동안 백금층을 입혔는데, 염화백금과 아세트산 납으로 제조한 용액을 전해액으로 사용하였다. 전류밀도가 20∼50 mA/㎠일 때 백금흑은 수지상으로 성장하여 "나무"와 같은 형태를 보였다. 백금흑의 면적밀도가 1.3mg/㎠ 이상일 때 10μm의 적외선에서 측정한 수광효율은 90% 이상이었다. Morphology and infrared absorbing characteristics of Pt-black prepared by electroplating have been investigated with XRD, SEM, and IR spectrophotometer. The Pt later was coated on Au-coated alumina/glass substrates for 1-5 min at pH 1.0-1.5, where a solution of platinum chloride and lead acetate was used as the electrolyte. At the electrical current density of 20-50 mA/㎠, the Pt-black showed a dendritic growth which was characterized by a "tree" shape. Absorptivity of above 90% at IR radiation of 10 m was observed for the Pt absorbing layer with an area density of ≥1.3mg/㎠.

      • KCI등재

        DCT 기반의 워터마크 재정렬을 이용한 디지털 워터마킹

        배성호,Bae, Sung-Ho 한국정보처리학회 2002 정보처리학회논문지B Vol.9 No.5

        Watermarking is embedding a digital signal called as watermark into images to claim the ownership. In this paper, a new digital watermarking algorithm based on DCT (Discrete Cosine Transform) which enhances invisibility and robustness is proposed to improve contentional digital watermarking method using DCT. In the proposed method, it is possible to enhance invisibility and robustness using watermark reordering in which the relative significance of original DCT coefficients can be preserved in watermarked DCT coefficients, and the distortions of original DCT coefficients can be minimized. The experimental results show that the proposed method improves invisibility approximately 9~12[dB] and is more robust to various attacks than the conventional method. 워터마킹은 소유권을 주장하기 위하여 워터마크라는 디지털 신호를 영상에 첨가하는 것이다. 본 논문에서는 기존의 DCT를 이용한 디지털 워터마킹 방법을 개선하여 비가시성과 견고성을 동시에 향상시키는 새로운 DCT 기반의 디지털 워터마킹 방법을 제안한다. 제안한 방법에서는 원 DCT 계수의 상대적 중요성이 워터마킹된 DCT 계수에서도 보존되며, 원 DCT 계수의 왜곡을 최소화시키는 워터마크 재정렬 방법을 이용함으로서 비가시성과 견고성을 향상시킨다. 실험을 통하여 제안한 방법은 기존의 워터마킹 방법보다 비가시성을 약 9~12[dB] 향상시키며, 다양한 공격에 대해 견고성이 월등히 우수함을 확인하였다.

      • 수압파쇄시험에 의한 산악지역에서의 현지 암반 초기응력 측정 및 분포특성 연구

        배성호,전석원,최용근,김학수,Bae, Seong-ho,Jeon, Seok-won,Choi, yong-kun,Kim, Hak-soo 한국터널지하공간학회 2002 터널기술 Vol.4 No.1

        국토의 65 % 이상이 산악으로 구성된 이유로 90년대 이후 산악지형의 암반을 대상으로 한 대규모 교통터널, 에너지 비축시설 및 산업용 저장소와 같은 대형 토목구조물의 필요성이 크게 증가하고 있다. 암반내 시공되는 토목 구조물의 설계과정에서 현지 암반의 초기응력장에 대한 정량적인 자료가 주요한 핵심요소로 작용하며 이러한 초기응력장에 대한 제반 정보를 획득하기 위한 목적으로 국내에서는 정밀 지반조사 과정에서 수압파쇄법이 대표적으로 사용되고 있다, 본 논문에서는 국내 각지의 산악지형에서 얻어진 수압파쇄시험 현장 측정 자료들에 대한 해석결과를 바탕으로 국내 산악지형의 암반내 초기응력 분포 특성에 대한 분석을 수행하였다. Since early in the 90's, the need for construction of underground rock structures such as long and large section traffic tunnel, energy storage cavern, industrial facility, etc. has been largely increased because the Korean territory is not wide and about 65 % of the land consists of mountainous region. The initial rock stress measurement has been widely conducted to provide the quantitative information on the stress state of engineering site at the design stage of underground rock structures. Among the diverse methods developed for measuring rock stress, hydraulic fracturing test is most popularly used because it is applicable at pre-construction stage and has no limit in testing depth. In this paper, the characteristics of initial rock stress state in mountainous region were studied on the basis of the in-situ hydraulic fracturing stress measurement results from the 60 test boreholes in various parts of Korea.

      • KCI등재

        인덱스 변환 함수를 이용한 벡터 양자화 기반의 견고한 다중 워터마킹 방법

        배성호,송근원,Bae Sung-Ho,Song Kun-Woen 한국정보처리학회 2005 정보처리학회논문지B Vol.12 No.5

        본 논문에서는 인덱스 변환 함수를 이용한 벡터양자화 기반의 견고한 다중 워터마킹 방법을 제안한다. 기존의 워터마크 삽입 방법들은 단지 하나의 워터마크를 원영상에 삽입하는데 비해 제안한 방법에서는 저작권 보호를 위하여 여러 개의 워터마크를 삽입한다. 제안한 방법은 다양한 공격에서도 벡터양자화 인덱스들의 변화를 최소화시키는 인덱스 변환 함수를 사용하여 견고성을 효과적으로 개선시킨다. 실험을 통하여 제안한 방법이 기존의 벡터양자화 기반의 다중 워터마킹 방법과 비교하여 다양한 공격에서도 견고성이 우수함을 확인하였다. In this paper, we propose a robust multi-watermarking method based on vector quantization using an index transform function. In contrast with the conventional watermark embedding methods to embed only one watermark at a time into the original image, we present a method to embed multiple watermarks for copyright protection. The proposed method efficiently enhances the robustness by index transform function which minimizes changes of vector quantization indices against various attacks. Experimental results show that the proposed method has a good robustness against various attacks compared with the conventional multi-watermarking method based on vector quantization.

      • 서울 중심부 편마암 분포지역 저심도 구간의 암반 초기응력 분포특성 연구

        배성호,전석원,최용근,김재민,Bae, Seong-ho,Jeon, Seok-won,Choi, Yong-Kun,Kim, Jae-min 한국터널지하공간학회 2003 터널기술 Vol.5 No.2

        90년대 이후 지하 암반 구조물의 수요가 증가함에 따라 시공 전 설계 단계에서 요구되는 암반내 초기응력에 대한 정량적 정보를 얻기 위해 현장 초기 응력 측정이 광범위하게 수행되고 있다. 제안된 여러 측정법들 중 현장 적용성 면에서 큰 장점을 가진 수압파쇄법이 국내에서는 대표적으로 적용되고 있다. 본 논문에서는 평탄한 지형조건으로 이루어진 서울 중심부 편마암 지역내 저심도 구간의 11개 시추공을 대상으로 수압파쇄법에 의해 구해진 초기응력 측정자료와 수평응력의 크기, 방향성과 심도별 변화 그리고 측압계수 분포 등 과업구간 암반 내 초기응력장의 제반 분포 특성에 대해 논의하고자 한다. Since early in the 90's, as the need for construction of underground rock structures has been largely increased, the in-situ rock stress measurement has been widely carried out to provide the quantitative information on the initial stress state of test site at the design stage of underground rock structures. Among the diverse method developed for measuring rock stress, hydraulic fracturing method is most popularly used because it is applicable at pre-construction stage and has no limit in testing depth. In this paper a study on initial rock stress state at shallow depth of the plain gneiss region in the central part of Seoul was performed on the basis of the in-situ hydraulic fracturing stress measurement results from the 11 test boreholes. And overall characteristics of the initial stress field of the study area are discussed.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼