http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박영철,이창식,Park, Young-Cheol,Lee, Chang-Sik 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.7
The exhaust gas flow in the inlet collector of close coupled catalyst(CCC) adapted to the exhaust manifold is very complex flow because the exhaust gas is a pulsation flow with several port flow. The distribution of gas flow and temperature in inlet collector effect to the efficiency of catalytic converter. In this study, it measures temperatures on several point in inlet collector with two kind of inlet collector volume. And it analyzes with CFD to exhaust manifold and close coupled catalyst for temperature and flow. Comparing to measured and analyzed result, it find increasing of collector volume effects to catalyst temperature distribution and uniformity of catalytic converter
박영철,윤정현,윤대희,차일환,Park, Young-Cheol,Yun, Jeong-Hyeon,Youn, Dae-Hee,Cha, Il-Whan 한국음향학회 1996 韓國音響學會誌 Vol.15 No.2
본 논문에서는 일차원 밀폐함 내의 광대역 소음을 제어하기 위한 에너지 밀도(energy density)제어 알고리듬의 성능을 평가한다. 주파수 영역에서 최적 능동 소음 제어 필터를 설계할 경우 종종 시간 영역에서 물리적으로 실현할 수 없는 결과를 얻게 된다. 이런 문제를 피하기 위해 본 논문에서는 시간 영역에서 문제를 해석한다. 이러한 접근 방법은 항상 물리적으로 실현 가능한 최적 제어기를 얻을 수 있게 해준다. 능동 소음 제어 시스템의 성능을 예측하기 위해 실시간 모의 실험 결과로부터 음압을 최소화 하는 것보다 에너지 밀도를 최소화 하는 것이 광대역 소음의 전역적인 감쇠(global attenuation)에 있어서 향상된 결과를 얻을 수 있음을 확인할 수 있다. 또한 특정 지점에서, 검출된 에너지 밀도를 최소화할 경우 밀폐함 내에 있는 위치 에너지를 최소화하는 방법에서 얻을 수 있는 결과와 유사한 정도의 소음 전역 감쇠를 얻을 수 있었다. 그리고 음압 자승 제어 방법과는 달리 에너지 밀도 제어 방법은 일차원 음장에서 사용하는 경우 오차 센서의 위치에 영향을 받지 않음을 알 수 있다. 본 논문은 또한 에너지 밀도 제어 알고리듬의 실제 구현시에 일반적으로 사용되는 두 개의 센서를 사용하는 구현 기술을 살펴보고, 이 기술이 큰 성능 저하 없이 에너지 밀도 제어 알고리듬을 구현할 수 있음을 보인다. The performance of the energy density control algorithm for controlling a broadband noise is evaluated in a one-dimensional enclosure. To avoid noncausality problem of a control filter, which often happens in a frequency domain optimization, analyses presented in this paper are undertaken in the time domain. This approach provides the form of the causally constrained optimal controller. Numerical results are presented to predict the performance of the active noise control system, and indicate that imp개ved global attenuation of the broadband noise can be achieved by minimizing the energy density, rather than the squared pressure. It is shown that minimizing the energy density at a single location yields global attenuation results that are comparable to minimizing the potential energy. Furthermore, unlike the squared pressure control, the energy density control does not demonstrate any dependence on the error sensor location for this one-dimensional field. A practical implementation of the energy-based control algorithm is presented. Results show that the energy density control can be implemented using the two sensor technique with a tolerable margin of performance degradation.
석탄가스에 함유된 H₂O/H₂S 농도가 유동층반응기에서 아연계건식탈황제의 성능에 미치는 영향
박영철(Park, Young-Cheol),조성호(Jo, ung-Ho),진경태(Jin, Gyoung-Tae),이승용(Lee, Seung-Yong),이창근(Yi, Chang-Keun) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
본 연구에서는 석탄가스에 함유된 H₂O/H₂S 농도변화에 따른 세가지 종류의 아연계 탈황제의 반응성능을 회분식 유동층반응기에서 분석하였다. 가스화에서 생성되는 가스의 조성은 모사가스를 이용하여 입구의 H₂O와 H₂S 농도를 변화시켜 실험을 수행하였다. H₂O의 농도는 5%부터 30%까지 H₂S의 농도는 0.5%에서 2%로 변화시켜 탈황성능을 분석하였다. 실험 결과 H₂O의 농도가 증가할수록 탈황성능이 감소하였다. 입구의 H₂S 농도가 증가할수록 탈황반응기 후단의 H₂S 농도 역시 증가하였으나, 탈황성능은 최저 99.5%로 건식탈황제를 이용하여 99% 이상의 H₂S 제거 성능을 보이는 것을 확인하였다.
석탄가스화기, F-T 공정, 건식탈황공정이 통합된 0.3 배럴/일 규모 석탄액화(CTL) 공정에서 고온, 고압 연속운전에서 아연계 탈황제의 탈황 성능 파악
박영철(Park, Young Cheol),조성호(Jo, Sung-Ho),진경태(Jin, Gyoung Tae),이승용(Lee, Seung-Yong),이창근(Yi, Chang-Keun) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.06
고온건식탈황기술은 고온고압에서 석탄가스에 함유된 황화합물을 제거하는 기술로 석탄가스화에 의해 생성된 고온의 석탄가스의 열손실을 최소화하여 열효율이 높은 기술이다. 본 연구에서는 석탄으로부터 합성원유를 생산하는 0.3 배럴/일 규모 석탄액화(CTL)공정의 연계운전을 통하여 건식탈황공정의 성능을 평가하였다. 0.3 배럴/일 규모 석탄액화공정은 석탄가스화기, 건식탈황공정, 액화공정으로 구성되어 있으며 30 atm의 고압에서 운전된다. 건식탈황공정은 석탄가스화기와 액화공정 사이에 위치하여 석탄가스화로부터 생성된 석탄가스에 함유된 황화합물을 아연계 건식탈황제에 의해 제거한 후 액화반응기로 공급하여 황화합물에 의한 촉매의 피독을 막아주는 역할을 수행한다. 본 연구에서는 기존에 개발된 두 개의 기포유동층 반응기로 구성된 탈황장치를 30 atm에서 운전이 가능하도록 수정/보완하여 실제 운전압력인 30 atm의 고압에서 연속운전을 수행하였다. 실험 결과 탈황효율은 99% 이상이며 탈황반응기 출구 황화합물의 농도는 1 ppmv 이하로 유지하였다.
수산 관련 시계열 자료를 이용한 통계학적 분석에서의 자기상관에 대한 고찰
박영철(Young Cheol Park),히야마요시아끼(Yoshiaki Hiyama) 한국수산과학회 2002 한국수산과학회지 Vol.35 No.3
시계열자료가 가진 자기상관은 추정된 상관관계를 왜곡시키는 요인들 중의 하나로 작용한다. 회귀모형의 잔차항에 자기상관이 있는 지를 검정하기 위해 Durbin-Watson 통계량이 흔히 쓰인다. 잔차항에 자기상관을 가친 회귀모형의 효율성을 향상시키기 위해 Yule-Walker 법, 비선형최소제곱법, 최우추정법 및 사전백색화법이 사용되어 왔다. 본 연구는 자기상관으로 인한 상관관계의 왜곡을 방지하기 위한 이들 방법들에 대해 고찰하였다. 사전백색화법을 제외한 앞의 3가지 방법을 20년간의 실제 시계열 자료에 적용하였으며 몬테카롤로법을 이용하여 각 방법의 오차변이를 조사하였다. 각 방법의 평균잔차제곱분포의 경우, 최우추정법으로 추정된 평균잔차제곱이 가장 작았으며 분포 범위도 가장 작았으나 각 추정방법 사이에 유의한 차이가 발견되지는 않았다. Autocorrelation in time series data can affect statistical inference in correlation or regression analyses. To improve a regression model from which the residuals are autocorrelated, Yule-Walker method, nonlinear least squares estimation, maximum likelihood method and `prewhitening` method have been used to estimate the parameters in a regression equation. This study reviewed on the estimation methods of preventing spurious correlation in the presence of autocorrelation and applied the former three methods, Yule-Walker, nonlinear least squares and maximum likelihood method, to a 20-year real data set Monte carlo simulation was used to compare the three parameter estimation methods. However, the simulation results showed that the mean squared error distributions from the three methods simulated do not differ significantly.