http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
나영수,Seong-Ho Hong,송진호,홍성완 한국원자력학회 2016 Nuclear Engineering and Technology Vol.48 No.6
A visualization test of the fuelecoolant interaction in the Test for Real cOrium Interactionwith water (TROI) test facility was carried out. To experimentally simulate the In-Vesselcorium Retention (IVR)- External Reactor Vessel Cooling (ERVC) conditions, prototypiccorium was released directly into the coolant water without a free fall in a gas phase beforemaking contact with the coolant. Corium (34.39 kg) consisting of uranium oxide and zirconiumoxide with a weight ratio of 8:2 was superheated, and 22.54 kg of the 34.39 kgcorium was passed through water contained in a transparent interaction vessel. An imageof the corium jet behavior in the coolant was taken by a high-speed camera every millisecond. Thermocouple junctions installed in the vertical direction of the coolant were cutsequentially by the falling corium jet. It was clearly observed that the visualization imageof the corium jet taken during the fuelecoolant interaction corresponded with the temperaturevariations in the direction of the falling melt. The corium penetrated through thecoolant, and the jet leading edge velocity was 2.0 m/s. Debris smaller than 1mmwas 15% ofthe total weight of the debris collected after a fuelecoolant interaction test, and the massmedian diameter was 2.9 mm.
나영수,김진섭,강용철,변상기,나극환 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.8
본 논문에서는 고속 데이터 무선인식에 적용 될 2.45㎓ 수동형 RF-ID 시스템을 개발하였다. RF-ID 시스템은 수동형 태그 와 리더로 구성되어 있다. RF-ID 수동형 태그는 제로 바이어스 쇼트키 다이오드를 사용한 정류기, ID 칩, ASK 변조회로 그리고 backscatter 슬롯 안테나로 구성되어있다. 또한, ASK 변조를 위한 스위칭 소자로서 바이폴라 트랜지스터를 이용하여 저전력 소모 변조회로를 구성하였으며 태그의 슬롯 안테나는 일반 패치 안테나보다 광대역 특성을 갖는다. RF-ID 리더는 circulator를 사용하여 단일 마이크로스트립 패치 어레이 안테나를 사용하였으며 종래의 방식에서 채택하는 double-balanced mixer구조를 사용하지 않고 single-balanced mixer구조를 채택함으로서 회로의 복잡성을 개선하고 전체적인 단말기 크기를 소형화 가능하도록 설계하였다. 측정결과 동작주파수는 2.4 GHz이고 출력은 27 dBm (500 mW)에서 감지거리 1 m로 나타났다. 리더에서 측정된 변조신호는 -46.76 dBm이며 주파수는 57.2 kHz이다. In this paper, the RF-ID system for ubiquitous tagging applications has been designed, fabricated and analysed. The RF-ID System consists of passive RF-ID Tag and Reader. The passive RF-ID tag consists of rectifier using zero-bias schottky diode which converts RF power into DC power, ID chip, ASK modulator using bipolar transistor and slot loop antenna. We suggest an ASK undulation method using a bipolar transistor to compensate the disadvantage of the conventional PIN diode, which needs large current Also, the slot loop antenna with wider bandwidth than that of the conventional patch antenna is suggested The RF-ID reader consist of patch array antenna, Tx/Rx part and ASK demodulator. We have designed the RF-ID System using EM and circuit simulation tools. According to the measured results, The power level of modulation signal at 1 m from passive RF-ID Tag is -46.76 dBm and frequency of it is 57.2 KHz. The transmitting power of RF-ID reader was 500 mW
나영수,변상기,나극환,김진섭,강용철 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.8
In this paper, the RF-ID system for ubiquitous tagging applications has been designed, fabricated and analysed. The RF-ID System consists of passive RF-ID Tag and Reader. The passive RF-ID tag consists of rectifier using zero-bias Schottky diode which converts RF power into DC power, ID chip, ASK modulator using bipolar transistor and slot loop antenna. We suggest an ASK modulation method using a bipolar transistor to compensate the disadvantage of the conventional PIN diode, which needs large current. Also, the slot loop antenna with wider bandwidth than that of the conventional patch antenna is suggested. The RF-ID reader consist of patch array antenna, Tx/Rx part and ASK demodulator. We have designed the RF-ID System using EM and circuit simulation tools. According to the measured results, The power level of modulation signal at 1 m from passive RF-ID Tag is -46.76 dBm and frequency of it is 57.2 ㎑. The transmitting power of RF-ID reader was 500 ㎽ 본 논문에서는 고속 데이터 무선인식에 적용 될 2.45 ㎓ 수동형 RF-ID 시스템을 개발하였다. RF-ID 시스템은 수동형 태그와 리더로 구성되어 있다. RF-ID 수동형 태그는 제로 바이어스 쇼트키 다이오드를 사용한 정류기, ID 칩, ASK 변조회로 그리고 backscatter 슬롯 안테나로 구성되어있다. 또한, ASK 변조를 위한 스위칭 소자로서 바이폴라 트랜지스터를 이용하여 저전력 소모 변조회로를 구성하였으며 태그의 슬롯 안테나는 일반 패치 안테나보다 광대역 특성을 갖는다. RF-ID 리더는 circulator를 사용하여 단일 마이크로스트립 패치 어레이 안테나를 사용하였으며 종래의 방식에서 채택하는 double-balanced mixer구조를 사용하지 않고 single-balanced mixer구조를 채택함으로서 회로의 복잡성을 개선하고 전체적인 단말기 크기를 소형화 가능하도록 설계하였다. 측정결과 동작주파수는 2.4 ㎓이고 출력은 27 dBm (500 ㎽)에서 감지거리 1 m로 나타났다. 리더에서 측정된 변조신호는 -46.76 ㏈m이며 주파수는 57.2 ㎑이다.