http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Pt-Pd 촉매를 사용한 직접 개미산 연료전지의 특성 조사
유재근(Yu, Jae-Keun),이효송(Lee, Hyo-Song),김진용(Kim, Jin-Yong),이영우(Rhee, Young-Woo) 한국신재생에너지학회 2005 한국신재생에너지학회 학술대회논문집 Vol.2005 No.11
직접 메탄올 연료전지는 휴대용기기의 전원으로써 기대되고 있다. 그러나 메탄올의 crossover, 느린 산화반응과 같은 몇 가지 해결해야 할 문제점을 갖고 있다. 이에 메탄올을 대체할 연로로서 이론적으로 높은 기전력 (1.45 V)을 갖는 개미산이 제안되었다. 본 연구에서는 직접 개미산 연료전지에 대한 이전 연구를 바탕으로 개미산 연료전지에 우수한 성능을 나타내는 촉매를 개발하고자 하였다. 기존의 연구에서 Pt-Pd/C 촉매가 개미산에 대해 우수한 산화반응을 보이며 높은 OCP를 나타내어, 본 연구에서는 deposition method을 이용하여 Pt-Pd 촉매를 제조한 후 그 특성을 조사하였다. Pt-Pd 촉매는 이전의 연구에서 우수한 성능을 나타낸 Pt-Pd 촉매보다 상온에서 2배 이상의 우수한 성능을 나타내었다.
선로이송 가설공법을 적용한 철도판형교 유도상화(III)
민지홍(ji-Hong Min),장준현(Jun-Hyun Jang),우용근(Jin-Yong Kim),김진용(Yong-Keun Woo) 한국철도학회 2011 한국철도학회 학술발표대회논문집 Vol.2011 No.10
To install heavy structures in the railway bridges crane methods or launching methods using temporary structure have been applied. These methods are uneconomical because working yard is required temporary cut of rail system etc. In this study various construction methods has been developed which are suitable to the filed conditions. In the case of simple span structure like plate girder bridges the girder is loaded to troy system at the working yard and then transferred to the working place. To lift and lower the girder system a new transfer system was developed. Different methods each for simple span bridge girder and long span girder were developed and detailed work procedures were proposed. Using these methods the heavy structures can be installed with simple and safe work procedures and the construction cost and duration can be reduced.
Pt계 촉매를 이용한 직접 개미산 연료전지의 특성 연구
유재근,이효송,김진용,김기호,이영우 충남대학교 공업교육연구소 2005 論文集 Vol.27 No.1
Direct Formic Acid Fuel Cells (DFAFCs) are potential alternative power sources for potable devices such as cellular phones, personal digital assistants (PDA) and laptop computers. In this study, we investigated the effect of the anode catalysts on the performance of direct formic acid fuel cell. We made the Pt-Pd catalysts using deposition method for the investigation of the fuel cell performance as a change of temperature and oxidant. Fuel cell with Pt-Pd anode catalyst showed the performance of 120 mW/㎠at room temperature. This result was much higher value than that of Pt-Ru catalyst which showed the best performance of commercial catalyst in our previous works. For this reason, we can conclude that the Pt-Pd catalyst is an excellent material for the oxidation of formic acid.