http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김원훈,나석주 대한기계학회 1988 대한기계학회논문집 Vol.12 No.4
본 연구에서는 플라즈마 키홀 용접 시의 열 및 물질 유동을 규명함으로써 용 접부 조직변화 예측과 더불어 용접부 형상설계, 열응력 계산 등의 기본자료를 제시하 여 전체적인 용접부 품질성능을 향상시키는데 목적이 있다. Use of a plasma arc as the source of energy for penetration welding of thin plates gives rise to a cylindrical hole surrounded by the molten metal. Material moves from the front to the rear of the hole by flowing around the hole as the workpiece is translated relatively to the arc. Based on the finite difference method, three different computer models have been proposed for the steady state, two dimensional heat and mass flow during the plasma arc welding. In the formulation energy equation was derived by the energy blance method through the cell control volume, and all the governing equations derived for the fixed coordinates was translated for the moving coordinate system. The driving force for fluid flow being considered was only electromagnetic force. The calculated and measured molten poon and HAZ width were compared and better agreement was obtained for the models considering the keyhole effect.
다구찌 방법을 이용한 AISI 4130재료에서 EBW공정의 용접 변수 영향
김원훈,Kim, Won-Hoon 대한용접접합학회 1997 대한용접·접합학회지 Vol.15 No.6
In the present work, Taguchi method for electron beam welding(EBW) process in AISI 4130 steel plate has been adopted for investigating the contribution of effect of welding variables. $A L_8(2^7)$ orthogonal array is adopted to obtain the effect of adjustment parameters. The adjustment parameters consist of accelerating voltage, beam current, travel speed and focus currrent. And the quality features selected for the EBW process are bead width of weldment, reinforcement, penetration depth, undercut and area of weld metal. Variance analysis is performed in order to check the effect of adjustment parameters on EBW. The mechanical properties of electron beam welded joints for each heat treatment conditions are investigated in comparison with those of base metal, especially from the view point of tensile and impact properties.
용접 아크 및 용융 풀의 유동을 고려한 용접부 수치 해석
김원훈,나석주 대한용접접합학회 1997 대한용접·접합학회지 Vol.15 No.1
본 연구에서는 GTAW 및 GMAW 공정에서 용접부의 열 및 물질유동해석을 수행하기 위한 지배방정식, 해석방법 및 절차를 제시하였으며, 또 실제로 해석한 결과를 에제로 살펴보았다. 그러나 용접공정은 매우 복잡한 물리적 현상을 야기하기 때문에 용접부 수치해석 모델 설정 및 해석의 수행은 용이한 일은 아니다. 그렇지만 이 분야의 연구는 용접 구조물에 대해서 사전에 용접조건 설정을 위한 실제 용접 작업 수행을 하지 않고 용접부 형상, 결함, 냉각속도, 응고 등의 예측을 위한 매우 효과적이고 경제적인 방법으로 사료되기 때문에 용접 분야에 종사하는 관련 연구자들의 관심이 한층 더 요망된다.