RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        강성등가하중을 이용한 새로운 비선형해석 알고리즘

        김영민,김치경,김태진,Kim, Yeong-Min,Kim, Chee-Kyeong,Kim, Tae-Jin 한국전산구조공학회 2007 한국전산구조공학회논문집 Vol.20 No.6

        본 연구에서는 새로운 비선형해석 알고리즘인 적응형 Newton-Raphson 반복기법을 제안한다. 제안된 기법은 기존 Newton-Raphson 기법을 근간으로 적응형 부구조물화 기법을 이용하여 강성등가하중을 구하고, 이미 역행렬이 계산되어 있는 초기강성행렬에 강성등가하중을 적용하여 보정변위를 구하는 것으로 요약된다. 제안된 알고리즘의 가장 큰 특징은 하중 구간의 수에 관계없이 구조물 강성행렬에 대한 역행렬 계산을 단 한번만 수행한다는 것이다. 제안된 기법의 효율성은 강성행렬 및 역행렬 계산 후 부재강성행렬이 변경된 부재들이 연결된 자유도 수와 전체 자유도 수의 비율에 직접 관계된다. 이 비율에 따라 제안된 기법을 기존 비선형해석 기법과 보완적으로 사용함으로써 전체 비선형해석 효율을 향상시킬 수 있다. This paper presents a new nonlinear analysis algorithm, that is, adaptive Newton-Raphson iteration method, The presented algorithm is based on the existing Newton-Raphson method, and the concept of it can be summarized as calculating the equivalent load for stiffness(ELS) and adapting this to the initial global stiffness matrix which has already been calculated and saved in initial analysis and finally calculating the correction displacements for the nonlinear analysis, The key characteristics of the proposed algorithm is that it calculates the inverse matrix of the global stiffness matrix only once irresponsive of the number of load steps. The efficiency of the proposed algorithm depends on the ratio of the active Dofs - the Dofs which are directly connected to the members of which the element stiffness are changed - to the total Dofs, and based on this ratio by using the proposed algorithm as a complementary method to the existing algorithm the efficiency of the nonlinear analysis can be improved dramatically.

      • KCI등재

        고층건물의 멀티 기둥그룹에 대한 부등기둥축소량의 최적보정기법

        김영민,Kim, Yeong-Min 한국전산구조공학회 2008 한국전산구조공학회논문집 Vol.21 No.2

        본 연구에서는 3개 이상의 기둥그룹에 대해서도 일반적으로 적용 가능한 기둥축소량의 최적보정기법을 제안하고, 이를 실제 시공된 건물에 적용하여 그 적용성을 평가하였다. 제안된 최적보정기법은 성능 및 시공상의 제약조건을 만족하면서 보정개소를 최소한으로 할 수 있는 층그룹 및 이때의 보정량을 산정하며, 상대보정뿐만 아니라 절대보정을 고려한 혼합보정도 가능하다. 최적보정에는 시뮬레이티드 어닐링(simulated annealing)이 주요 알고리즘으로 사용되었다. 제안된 기법을 실제 축소량 보정이 수행된 61층 건물에 적용한 결과, 보정량을 쉽게 산출할 수 있고 또한 실무방식보다 보정개소를 줄일 수 있어 적용성이 뛰어남을 확인하였다. This study presents optimal compensation algorithm of differential column shortening for more than two column groups. The proposed algorithm produces the minimum story groups and their compensation thicknesses which satisfy constraint conditions on performance and construction and enables not only the relative compensation but also the mixed compensation considering absolute shortening. The simulated annealing algorithm is used as the main optimization technique. The applicability of the proposed algorithm was verified by applying it to the 61-storey building where compensation of differential column shortening had already been performed. Using, the proposed algorithm compensation was performed easily and the number of compensation was less than the field method.

      • 서미스터용 Mn-Co-Ni-Fe계 산화물의 조성에 따른 전기저항특성

        김영민,임재석,임굉,Kim, Yeong-Min,Im, Jae-Seok,Im, Goeng 배재대학교 공학연구소 2004 공학논문집 Vol.5 No.1

        Mn-Co-Ni 3성분계에 Fe의 첨가량을 변화시켜 따른 산화물 서미스터소결체(Mn-Co-Ni-Fe oxide)를 소성온도 1200~$1400^{\circ}C$에서 제조하여 전기저항특성을 조사한 결과, 결정상은 단일입방정 스피넬형 결정구조였고, 소성온도에 따른 전기전도도는 $1300^{\circ}C$에서 4시간 소결한 시미스터가 가장 높았다. 대체로 F-2를 제외하고는 Fe의 첨가량이 증가할 때 비저항은 증가하고 상대적으로 전기전도도는 감소한다. 특히 F-2의 조성에 있어서는 전기전도도가 1.4${\times}$$10^-3$${\ textohm}cm로 높았고 상대적으로 B정수는 2906K로 낮았다. The properties of electrical resistance of Mn-Co-Ni-Fe oxide-based thermistor with various Fe contents in sintering process at $1200^{\circ}$ to $1400^{\circ}C$ for 4 hours in air atmosphere for fabricating thermistor materials were investigated. The results were as follows: all samples showed single cubic spinel crystal structures in all region. The electrical conductivity is the highest thermistor sintered at $1300^{\circ}C$ for 4 hours. In general when the Fe content is increased except F-2, the resistivity increases and relatively the conductivity decreases. Particularly F-2 composition exhibited the highest electrical conductivity (1.4${\times}$$10^-3$${\textohm}cm) and relatively low B constant(2906K)

      • KCI등재SCISCIESCOPUS

        개선된 HEMT 비선형 서브임계전압 영역모델

        김영민,Kim, Yeong-Min 한국전자통신연구원 1989 전자통신 Vol.11 No.4

        Closed form solution of nonlinear 2-DEG concentration formula is proposed. This allows us to model continuous 2-DEG charge concentration as the function of gate voltage covering subthreshold region of the I-V curves. Comparisons of the Ids-Vgs characteristics and transconductance with the measured data were performed to show the accuracy of the proposed model. This way we have completely closed form I-V characteristics in subthreshold, triode and saturation region incorporating accurate charge control mechanism for HEMTs.

      • KCI등재SCISCIESCOPUS

        헴트 소자의 해석적 직류 모델

        김영민,Kim, Yeong-Min 한국전자통신연구원 1989 전자통신 Vol.11 No.2

        Based on the 2-dimensional charge-control simulation[4], a purely analytical model for MODFET's is proposed. In this model, proper treatment of the diffusion effect in the 2-DEG transport due to the gradual channel opening along the 2-DEG channel was made to explain the enhanced mobility and increased thershold voltage. The channel thickness and gate capacitance are experssed as functions of gate vlotage including subthreshold characteristics of the MODFET's analytically. By introducing the finite channel opening and an effective channel-length modulation, the slope of the saturation region of the I-V curves was modeled. The smooth transition of the I-V curves from linear-to-saturation region of the I-V curves was possible using the continuous Troffimenkoff-type of field-dependent mobility. Furthermore, a correction factor f was introduced to account for the finite transtition section forming between the GCA and the saturated section. This factor removes the large discrepanicies in the saturation region fo the I-V curves presicted by existing 1-dimensional models. The fitting parameters chosen in our model were found to be predictable and vary over relatively small range of values.

      • 수면위로 떠오른 육계 계열화사업

        김영민,Kim, Yeong-Min 대한양계협회 2008 월간 양계 Vol.40 No.12

        하림의 양돈산업 진출로 촉발된 계열화사업은 올해 양계업계의 화두라 해도 과언이 아니다. 대기업이 양돈산업까지 진출해 양돈 농가들을 이른바 '소작농'으로 전락시킬 수 있다는 주장이 제기되면서 계약문제 등을 포함한 계열화사업 전반에 대한 문제의식이 높아졌다. 계열업체들은 규모의 경제를 앞세워 다국적 식품 회사들과 당당하게 경쟁하기 위해서는 계열화사업은 불가피하다는 입장을 내세우고 있지만 농가들은 지금의 계열화 구조로는 선진국의 계열화 사업을 따라잡을 수 없다는 반박논리를 세우고 있다. 특히 생산원가가 보장되지 않은 상황에서 무조건 규모화만을 내세우는 계열사들의 논리는 농업의 특수성을 무시한 채 배부른 사람만 배부르게 만드는 일반 시장경쟁에 농업을 내치는 처사라고 강하게 반발하고 있다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼