RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        미소초점엑스선원 개발을 위한 전산모사

        김성수,이연승,김도윤,고동섭,Kim, Sung-Soo,Lee, Youn-Seoung,Kim, Do-Yun,Ko, Dong-Seob 한국진공학회 2011 Applied Science and Convergence Technology Vol.20 No.6

        MFX tube를 개발하기 위하여, MFX tube 내에서 전계방출음극으로부터 방출된 전자의 궤적을 SIMION 프로그램을 이용하여 전산모사하였다. 전자의 출발위치와 상관없이 emitter에서 방출된 전자빔을 한곳에 집중시킬 수 있는 optimum extractor voltage Ve가 존재한다는 것을 알아내었다. Extractor voltage Ve는 source voltage Vs에 따라 변하지만, 두 전압의 비율(Ve/Vs)는 항상 일정하고, 그 값은 99.4%였다. Source와 extractor에 인가된 전압의 비율(Ve/Vs)이 99.4%일 때, 교차점에서의 빔 직경은 $1.2{\mu}m$였다. MFXG의 초점 크기는 교차점에서의 beam diameter보다 작을 수 없기 때문에, 교차점에서의 beam diameter을 작게 할 수 있는 조건을 찾는 것은 중요하다. 따라서 위의 두 결과는 MFX tube의 개발에 있어서 매우 중요한 결과로 판단된다. To develop the MFX (Micro-Focus X-ray) tube, the trajectories of electrons emitted from the field emission cathode was simulated using SIMION program. Regardless of starting position of the electron in emitter, we found out the fact that there is the optimum extractor voltage Ve, which can focus the electron beam on one place. Extractor voltage Ve varies depending on the source voltage Vs, but the ratio of two voltages (Ve/Vs) is always constant, its value was 99.4%. When the ratio of two voltages (Ve/Vs) was 99.4%, the beam diameter in the cross-over point was $1.2{\mu}m$. Because the focal spot size in MFXG (Micro-Focus X-ray Generator) can not be less than the cross-over diameter within MFX tube, it is important to find out the conditions that can make a smaller beam diameter. Therefore, the above results is considered to be a very important ones in the development of the MFXG.

      • KCI등재

        휴대용 XRF 장치의 검출감도 향상에 관한 연구

        김성수,이연승,김도윤,고동섭,Kim, Sung-Soo,Lee, Youn-Seoung,Kim, Do-Yun,Ko, Dong-Seob 한국진공학회 2011 Applied Science and Convergence Technology Vol.20 No.6

        현재 개발 중인 휴대용 XRF (X-Ray Fluorescence) 장치의 검출감도를 향상시키기 위한 방법을 논의하였다. 대기 기체분자에 의한 강도 손실을 최소화하기 위하여 시료와 검출기 사이에 Vacuum module을 설치하였다. Vacuum module은 대기기체 또는 He 기체를 채울 수 있도록 고안하였다. 그리고 Vacuum module 내부에 He 기체를 채운 상태, 또는 진공상태에서 검출감도의 변화를 조사하였다. 그 결과 다음 3가지 중요한 결과를 얻었다. 첫 번째는, 낮은 에너지 영역(3~4 keV)에서의 XRF 강도가 2~4배 정도 증가하였다. 검출감도의 향상은 검출시간의 단축을 의미하기 때문에, 휴대용 XRF 장치에 있어서 매우 중요한 결과이다. 두 번째는, x-ray emission line의 에너지가 3 keV 이하인 원소의 검출 가능성을 확인하였다. 세 번째는, He 기체를 채운 vacuum module을 사용하면, 휴대용 XRF 장치에 진공밀폐용기를 쓰지 않으면서도 대기기체분자에 의한 흡수를 최소화할 수 있다는 것이다. 세 가지 모두 휴대용 XRF 장치의 개발에 있어서 매우 의미있는 결과로 판단된다. The method to improve the detection sensitivity of Hand-held XRF (X-Ray Fluorescence) device currently being developed is discussed. To minimize the loss of the intensity due to atmospheric gas molecules, the vacuum module, which can be filled with atmospheric or He gas, between the sample and the detector was installed. And the change of the detection sensitivity was measured in a vacuum and in the He gas-filled state. As a result, the following three important results were obtained; Firstly, XRF intensity was increased 2~4 times in the low energy range (3~4 keV). It is a very important result because the enhancement of the detection sensitivity means shortening of the detection time in Hand-held XRF device. Secondly, the possibility of detection of the elements less than 3 keV in emission energy was confirmed. Thirdly, the absorption by atmospheric gas molecules can be minimized without vacuum- sealed vessel in Hand-held XRF device, if the vacuum module filled with He gas is used. We concluded that all of three results are very meaningful in the development of a Hand-held XRF device.

      • KCI등재
      • 재해 재난을 대비한 임시주거 단지의 기반구축에 관한 연구

        김성수(Kim Seoung-Soo),이상호(Lee Sang-Ho) 대한건축학회 2009 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.29 No.1(계획계)

        These days, the international sympathy has been aroused to preparation of refugee’s living space by provision of temporary residence. With this consideration, study has been progressed about various type of temporary residence. But study for residence district plan also has been progressed with scale of damage becoming massive. Studies for this factor are insufficient yet. For guarantee of rapidity, cost saving, and quality, it is important to plan and prepare temporary residence district ready in advance before disasters, that time of disaster, it is important to provide qualified residential circumstance in to action. Therefore, this study suggest scheme of temporary residence district infra construction plan, and to deliver this aim, we researched the existing ordinary residence district and temporary residence districts cases in and out of the country, we analyzed and synthesized according to each factors, we suggest the conclusion of each public facilities and infra facilities parts.

      • KCI등재

        보건계열 대학생의 취업역량강화 프로그램이 대학생활 적응과 학업성취도에 미치는 구조적 관계

        성열훈,김성수,Seoung, Youl-Hun,Kim, Sung-Soo 한국디지털정책학회 2013 디지털융복합연구 Vol.11 No.2

        본 연구는 보건계열 대학생을 대상으로 취업역량강화 프로그램 수행 후 만족도가 대학생활 적응과 학업성취도에 어떠한 영향이 있는지를 실증분석하기 위해 수행하였다. 충북 소재 1개 대학교의 보건계열 전공자를 대상으로 취업역량강화 프로그램 수행 후 만족도 및 대학생활 적응과 학업성취도를 자기기입식 설문조사를 통하여 수집하였다. 분석결과 취업역량강화 프로그램 만족도가 높을수록 대학생활 적응이 좋은 것으로 나타났으며, 높아진 대학생활 적응은 학업성취도에 영향을 미치게 됨을 알 수 있었다. 비록 취업역량강화 프로그램 만족도가 학업성취도에는 직접적인 영향관계가 없었으나 대학생활 적응을 통해 학업성취도가 높아져 향후 취업에도 긍정적인 영향이 있음을 시사한다. 대학 적응을 높이고 취업 활성화를 위한 환경 마련을 위해 학과 특성에 맞는 취업관련 프로그램을 활성화하는 적극적인 노력이 필요하다. The study conducted an employment capability reinforcement program targeting health-related college students, and then carried out positive analysis to find out how satisfaction affects adjustment to college life and academic achievement. An employment capability reinforcement program was conducted which targeted health related majors at a university located in Cheongbuk, and information on satisfaction, adjustment to college life, and academic achievement was collected through a self-administered questionnaire. The analysis results revealed that the higher the satisfaction for the employment capability reinforcement program, the better the adjustment to college life, while increased adjustment to college life affected academic achievement. Although the employment capability reinforcement program had no direct relationship of influence to academic achievement, the study shows that it does lead to increased academic achievement by way of adjustment to college life, which ends up as a positive affect for future employment. Therefore, active efforts are necessary to revitalize employment related programs that suit the characteristics of each department in order to establish an environment for revitalizing employment and increasing adjustment to college life.

      • KCI등재

        약알칼리탈지 용액에서의 구리 Seed 층의 전처리 효과

        이연승,김성수,나사균,Lee, Youn-Seoung,Kim, Sung-Soo,Rha, Sa-Kyun 한국진공학회 2012 Applied Science and Convergence Technology Vol.21 No.1

        Sputter 방식으로 증착된 구리 seed 층(구리 seed/Ti/Si) 위에 형성된 오염물 제거과정을 이해하기 위하여, 강력한 계면 활성능력을 가진 약알칼리 탈지제 Metex TS-40A 용액을 사용하여 담금(dipping) 시간에 따른 구리 seed 층 표면의 변화형상 및 변화상태를 조사 분석하였다. Field emission scanning electron microscope을 이용하여 TS-40A 용액에 전처리 후 구리 seed 표면 형상이 grain이 명확히 보일 정도로 변화하는 것을 관찰하였고, X-ray photoelectron spectroscopy를 이용하여 표면 처리된 Cu seed 표면의 화학구조 및 불순물 상태를 조사하였다. TS-40 용액에서의 dipping 시간 변화에 따른 효과는 거의 없었다. TS-40A 용액에 전처리한 후, 구리 seed 층 표면위의 많은 탄소성분이 제거되었고, 약간의 산소가 제거되었으며, O=C 및 $Cu(OH)_2$에 해당되는 피크들이 감소되는 것이 관측되었다. 하지만 표면에서 불순물 Si이 silicate 상태로 검출되었다. TS-40A 용액에 포함되어 있는 silicate 성분이 구리 seed 층과 반응하여 이 silicate 불순물이 구리 seed 표면에 형성된 것으로 보여진다. 약알칼리 탈지제 Metex TS-40A 용액을 사용한 전처리 과정을 통해, 구리 seed 표면 위의 O=C 및 $Cu(OH)_2$ 등의 제거에는 탁월한 효과를 보였으나, 불순물 silicate가 형성되었으므로 이 알칼리 탈지제를 사용한다면, 이후에 산세정 및 다른 세정과정을 거쳐 표면에 존재하는 silicate를 제거할 필요성이 있다. In order to understand a process of contaminants removal on surface of Cu seed layer (Cu seed/Ti/Si) by sputter deposition, we investigated the changed morphology and states of Cu seed surface after pretreatment in alkali degreasing Metex TS-40A solution according to dipping time. After TS-40A pretreatment, the surface morphology with clearer grains was observed by Field emission scanning electron microscope and the changed surface chemical states and impurities on surface of samples were checked by X-ray photoelectron spectroscopy. Dipping time in TS-40A solution had very little effect on surface of Cu seed layer. After pretreatment, much carbons and little oxygens on surface of Cu seed were eliminated and the decrease of peaks corresponded to O=C and $Cu(OH)_2$ was estimated. However, Si content (=silicate) was detected on sample surface. We think that the silicate impurity forms on Cu seed by chemical reaction of TS-40A solution included silicate component. By pretreatment of alkali degreasing Metex TS-40A solution, it showed an excellent effect in removal of O=C and $Cu(OH)_2$ on Cu seed layer, but the silicate was formed on surface of Cu seed. Therefore, another cleaning process such as acid cleaning is required for removal of this silicate in use of this alkali degreasing.

      • 고온 가열시 W/B 변화에 따른 고강도 콘크리트의 잔존강도특성

        김상식 ( Kim Sang-shik ),송용원 ( Song Yong-won ),한창평 ( Hann Chang-pyung ),이성연 ( Lee Seong-yeun ),한민철 ( Han Min-cheol ),김성수 ( Kim Seoung-soo ) 한국구조물진단유지관리공학회 2007 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.11 No.2

        This study investigates the fundamental properties and residual strength of the high strength concrete subjected to the elevated temperature corresponding to various W/B. The results are summarized as following. All measurement of the fresh concrete are satisfied with the target values. For the properties of the hardened concrete, the compressive strengths of the W/B 20, 25, and 35% are 89, 86, and 71 MPa. The residual compressive strength corresponding to the elevated temperature is slightly increased at 200℃, but suddenly decreased about 54~60% over 600℃. The stress-strain is similar to the standard condition at 200℃, but it is extremely increased over 400℃.

      • KCI등재SCOPUS

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼