FTS법을 이용한 ITO박막의 제작

김건희,금민종,김한기,손인환,장경욱,이원재,최형욱,박용서,김경환,Kim, Geon-Hi,Keum, Min-Jong,Kim, Han-Ki,Son, In-Hwan,Jang, Kyung-Wook,Lee, Won-Jae,Choi, Hyung-Wook,Park, Yong-Seo,Kim, Kyung-Hwan 한국전기전자재료학회 2004 전기전자재료학회논문지 Vol.17 No.11

The ITO thin films were prepared by the FTS(Facing Targets Sputtering) system. The ITO thin films are deposited by changing the input current and working gas pressure. Then, electric characteristics, transmittance and surface roughness of ITO thin films were measured by Hall effect measurement, UV-VIS spectrometer and AFM. As a result, the ITO thin film was fabricated with resistivity 6xl0$^{-4}$ Ωㆍcm, carrier mobility 52.11 $\textrm{cm}^2$/Vㆍsec, carrier concentration 1.72 x $10^{20}$ $cm^{-3}$ transmittance over 85 % of ITO film at working gas pressure 1 mTorr and input current 0.6 A.

제품의 고부가가치 창출등 산업 전반에 걸쳐 파급효과 증대

김건희,Kim, Geon-Hui 한국광학기기산업협회 2006 光學世界 Vol.106 No.-

21세기 들어 BT, IT, NT, ST 관련 첨단산업이 우리나라의 미래를 선도할 산업으로 새롭게 부각되고 있다. 이들 산업의 핵심 부품 가공에 다이아몬드 선반을 이용한 초정밀 가공 기술은 계속해서 활용폭이 커질 뿐만 아니라 현재보다 한 단계 더 높은 가공정도, 즉 마이크로 이하 나노단위의 초정밀 가공기술이 요구될 것이다. 따라서 우리나라의 초정밀 가공 기술 분야에서 국가적인 기술요구에 부응하고 선진국에 대한 기술경쟁력을 확보하기 위해서는 다이아몬드공구 및 연삭 휠을 이용한 초정밀 가공의 기초 기술에 대한 보다 많은 연구가 필요하다.

고속카메라를 이용한 공구 절입시 변형 형상에 관한 연구

김건희,정우철,윤길상,신광호,허영무,Kim, Kun-hee,Jung, Woo-chul,Yoon, Gil-sang,Sin, Kwang-ho,Heo, Yeong-mu 한국금형공학회 2008 한국금형공학회지 Vol.2 No.1

The object of this study is a manufacture of buff die using CAM systems. Systems are consist of AutoCAD, CAM software and CNC milling machine. CAM software is purpose of G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

빅데이터 분석을 활용한 주짓수의 사회적 인식 연구

김건희,Kun-hee Kim 국제문화기술진흥원 2024 The Journal of the Convergence on Culture Technolo Vol.10 No.3

본 연구의 목적은 빅데이터 분석을 이용하여 주짓수에 대한 사회적 관심과 인식을 분석해 발전방안을 모색하는데 있다. 최근 10년간 국내 주요 포털 사이트의 데이터를 수집해 네트워크 분석, 중심성 분석, CONCOR 분석을 실시하였다. 먼저 네트워크 분석과 연결 중심성 분석에서 '유도' 가 가장 중요한 연관어로 나타났으며, 근접 중심성 분석에서는 '디펜더'가, 매개 중심성 분석에서는 '스포츠'가 가장 중요한 연관어였다. CONCOR 분석결과 4개의 군집(관련 운동 및 마케팅, 주짓수 대회, 승급, 용품 및 비용)이 형성되었다. 연구의 결론으로 첫째, '유도', '운동', '대회', '도복', '체육관', '승급' 등의 단어를 활용한 홍보가 필요하다. 둘째, 수련 비용 등에 대해 정보를 다양한 루트로 공유하고, 승급과정이나 방법에 대한 인식이 보편화 될 수 있도록 하는 방안이 마련되어야 하며, 안전용품개발 및 안전한 수련 문화를 만들어나갈 필요가 있다. 셋째, 꾸준히 대회를 유치해 새로운 수련생들의 유입을 지속적으로 늘리는 방안을 모색할 필요가 있다. The purpose of this study is to explore development plans by analyzing social interests and perceptions of jiu-jitsu using big data analysis. Network analysis, centrality analysis, and CONCOR analysis were conducted by collecting data for the last 10 years of major domestic portal sites. First, 'judo' was found to be the most important related word in network analysis, and 'judo' was also an important word in the analysis of dgree centrality. In the closeness centrality analysis, "defender" was the most important word, and "sports" was the most important word in betweenness centrality. Finally, as a result of CONCOR analysis, four clusters (related sports and marketing, jiu-jitsu competitions, belt test, supplies and expenses) were formed. As a conclusion of the study, first, words such as 'judo', 'exercise', 'competition', 'dobok', 'gym', and 'graduation' should be actively used to promote jiu-jitsu.As a conclusion of the study, first, words such as 'judo', 'exercise', 'contest', 'dobok', 'gym', and 'graduation' should be actively used to promote jiu-jitsu. Second, it is necessary to share information on training costs through various routes, to make awareness of the graduation process or method common, and to develop safety products and create a safe training culture. Third, it is necessary to find ways to continuously increase the influx of new trainees by attracting steady competitions.

공작기계 특성을 고려한 최적연삭조건 설정방법

김건희,Kim, Gun-Hoi 한국생산제조학회 1998 한국공작기계학회지 Vol.7 No.5

In order to utilize the information of well-know grinding database or grinding machine characteristics, a database needs to be designed by considering the delicate property of the machine tools for the high precision and quality of the demanding specification. Among the machine tools for the high precision and quality of the demanding specification. Among the machine tools, machining conditions of the grinding are various and knowledge repeatance obtained form the grinding process are less credable. therefore it is desirable for database, which is used to set the grinding conditions, to utilize the maximum machine tool capability. The present paper studied on the occurance limit of chatter vibration and burn considering the characteristics of machine tool. And also basic experiments were performed to establish the optimum grinding conditions which could maximize the grinding efficiency.

간호교육에서의 전문직 간 교육에 대한 현황과 발전방향

김건희,황은희,신수진,Kim, Kon Hee,Hwang, Eunhee,Shin, Sujin 연세대학교 의과대학 2017 의학교육논단 Vol.19 No.1

This study examined the perception and readiness of nursing educators regarding interprofessional education (IPE), and discussed the validity and application of IPE in nursing. From December 2016 to January 2017, 239 nursing professors and nurses completed a structured questionnaire consisting of general characteristics, the Interdisciplinary Education Perception Scale, the Readiness for Interprofessional Learning Survey (RIPLS), and an IPE action plan. The collected data were analyzed by descriptive statistics and t-test using the IBM SPSS ver. 23.0 program (IBM Corp., Armonk, NY, USA). The analysis revealed that 91.6% of the participants had not experienced IPE, and only 11.7% knew about IPE. However, approximately 80.0% answered that IPE is necessary. The results of this study showed that the score of the perceived need for cooperation was higher in nurses than it was in professors, while the score on competency and autonomy was higher in professors than it was in nurses. With reference to the scores on the RIPLS, those of professors were high on the sub-scales of teamwork and collaboration, professional identity, and roles and responsibility. The results revealed that participants considered the upper-grade undergraduate years as the ideal time for imparting IPE, and it was deemed suitable to include communication, simulation, and clinical practice in IPE. Doctors, pharmacists, and physiotherapists were thought to require cooperation for IPE the most. Despite the presence of several barriers to IPE, the participants thought that IPE can achieve learning outcomes such as interprofessional communication and cooperation, conflict resolution, and teamwork. It is necessary to cooperate with professionals in the complex clinical environment as professional areas are specialized and subdivided. Therefore, it is necessary to examine the application of IPE in undergraduate education and in on-the-job training.

뽕나무(Morus alba)와 꾸지뽕나무(Cudrania tricuspidata)의 부위에 따른 항산화 활성 및 3T3-L1세포 지방축적 억제 효과

김건희,김은향,Kim, Gun-Hee,Kim, Eunhyang 한국식품영양학회 2019 韓國食品營養學會誌 Vol.32 No.2

In this study, we examined antioxidative effects and the anti-adipogenesis effect of different parts of Cudrania tricuspidata (C), and Morus alba (M). Total polyphenol contents were highest in M-root ($34.56{\pm}0.045mg\;GAE/g$), and there was no significant difference, between C-root and M-leaf. Total flavonoid contents of C-root were highest ($23.07{\pm}0.004mg\;QE/g$). To examine antioxidant activities of C and M extracts, DPPH and ABTS radical scavenging activity, and FRAP assay, was used. Results show that antioxidant activities of C and M extracts increased, in a dose-dependent manner. Adipocytes are generated by preadipocyte differentiation, during adipogenesis. Matured adipocytes accumulate in abnormal and cause obesity. We investigated effects of leaf and root extracts of C and M, on lipid accumulation, in 3T3-L1 adipocytes. Changes in cell morphology, and degrees of lipid accumulation in adipocytes, were evaluated by Oil Red O staining. Root extracts of C and M, reduced lipid content in a dose-dependent manner. Therefore, root extracts of C and M, may be good candidates for managing obesity.

초정밀 가공장비 기술동향과 한국기초과학지원연구원의 연구.개발현황

김건희,Kim, Geon-Hui 한국광학기기산업협회 2007 光學世界 Vol.107 No.-

초정밀 가공기술은 선진국에서 기술이전을 회피하는 가장 심한 분야로 광산업의 핵심부품인 반사경, 비구면 렌즈, 광통신매체의 가공과 관련하여 국내의 초정밀 관련 기술의 한계에 의하여 전적으로 수입에 의존하고 있다. 이에 한국기초과학지원연구원은 2005년부터 기존의 측정분석위주의 단순지원에서 국가적 수요에 대응하는 대형첨단연구장비의 국산화를 위한 기술개발에 역점을 두고 있다. 이를 위한 기반기술로써 초정밀 가공 및 측정장비의 설치운영을 통한 첨단 연구장비의 핵심부품을 개발하고 있다. 특히 천문관측용 적외선(IR) 광학계의 초정밀가공기술 개발을 통한 항공우주용 광학계의 국산화 기술 향상에 기여하고 있다.

북한강 수역에 분포하는 Pseudanabaena 균주의 동정 및 2-MIB 생산 잠재성 분석

김건희,이세진,서경화,황순진,Kim, Keonhee,Lee, Sejin,Seo, Kyunghwa,Hwang, Soon-Jin 한국하천호수학회 2020 생태와 환경 Vol.53 No.4

이취미 물질인 2-MIB를 합성하는 원인종에 대한 정보는 담수생태계에서 이와 관련된 환경 및 경제적 문제를 해결하는 데 필수적이다. 본 연구는 북한강 수계에서 출현하는 Pseudanabaena strain을 분리·배양하고, 16S rDNA 염기서열을 이용하여 종 수준의 동정과 2-MIB 합성 유전자 탐색을 통해 이취미 물질 발생 잠재성을 분석하였다. 북한강 본류 지역(삼봉리, 조암면, 의암호 지역)에서 분리한 Pseudanabaena strain은 총 11개로서 NHUA201911과 NHPD201909 strain을 제외하고 단일세포의 크기는 서로 유사하였다. 그러나 16S rDNA 계통분석을 통한 유전자 염기서열의 유연관계를 분석한 결과, 분리된 strain들은 총 5개 종(P. cinerea, P. yagii, P. mucicola, P. galeata, P. redekei)으로 분류되었다(40~55% 유사도). 2-MIB를 합성하는 mibC 유전자는 P. cinerea 07 strain (NHUA202007-07)와 P. yagii (NHUA202007-08), P. redekei (NHUA201911)에서만 발견되었으며, 가스크로마토그래피 분석에 따라 실질적인 2-MIB 합성은 P. cinerea와 P. redekei 종에서 확인되었다. 본 연구결과는 분자생물학적 수준에서 북한강 수역에서 발생하는 Pseudanabaena속 남조류의 다양도에 대한 증거를 제공하는 연구로서 북한강 수계에서 2-MIB 생산 원인종에 대한 중요한 정보를 제공한다. Identification of the target species of 2-MIB (2-methyllisoborneol) production is crucial in the management of off-flavor problem in the freshwater system. This study was conducted to identify 2-MIB-producing Pseudanabaena strains occurring in the North Han River system using molecular genetic method. Eleven phenotypes of Pseudanabaena were isolated from several mainstream sites of the North Han River, including Sambong-ri, Joam-myun, and Lake Uiam areas. Despite of morphological similarity of the strains, the phylogenetic analysis using 16S rDNA classified them into different species with low genetic similarity (40~55%). Isolated Pseudanabaena strains were converged to four species; Pseudanabaena cinerea, P. yagii, P. mucicola, and P. redekei. Among them, the 2-MIB synthesizing gene (mibC) was detected in P. cinerea, P. yagii, and P. redekei. However, actual 2-MIB production was detected only in P. cinerea and P. redekei based on gas chromatography analysis. This study is the first report of the molecular identification of Pseudanabaena strains and their 2-MIB production potential in Korea. The results of this study provides an evidence of species diversity of Pseudanabaena occurring in the North Han River.

자동차 연료튜브 홀더용 이중사출 금형·성형기술

김건희,윤길상,허영무,정우철,신광호,Kim, Gun-Hee,Yoon, Gil-Sang,Heo, Young-Moo,Jung, Woo-Chul,Shin, Kwang-Ho 한국금형공학회 2007 한국금형공학회지 Vol.1 No.1

Double injection molding process is very efficient molding-method for molding the products which is consist of multi-materials. Fuel-tube holder which is necessary for automobil power train and circulation systems is composed of plastic and rubber materials to minimize the vibration and pulsation noises. In existing process, fuel-tube holder was made by the insert molding process or assembly process after molding. If fuel-tube holder is manufactured by double injection molding process, it may be realize to improve the product quality, efficiency of molding-process and retrenchment of manufacturing cost. In this study, for manufacturing fuel-tube holder by double injection molding process, the analysis of joining characteristics between PA6(polyamide 6) and TPE(thermoplastic elastomer) was executed and the double injectin mold for molding fuel-tube holder with core toggle mechanism was fabricated. Finally, fuel-tube holder was molding using fabricated double injection mold.