http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
충돌분류계에서 WIRE MESH를 이용한 열전달 증진에 관한 연구
금성민(S.M.Kum),김동춘(D.C.Kim),유지오(J.O.Yoo),이창언(C.E.Lee),임장순(C.S.Yim) 한국태양에너지학회 1997 한국태양에너지학회 논문집 Vol.17 No.1
본 연구는 2차원 충돌공기분류계의 포텐셜코어 영역에서 열전달증진을 목적으로 노즐출구와 전열면사이에 메쉬를 설치한후 노즐출구 속도, 메쉬와 전열면사이의 간극, 노즐출구와 전열면사이의 거리를 변화시킬 때의 열전달특성을 메쉬를 설치하지 않은 경우와 비교 검토한 것으로 메쉬를 설치했을 때에는 분류가 전열면에 충돌하면서 소분류로 분할되어 발생하는 난류에 의해 충돌영역에서 열전달성능이 좋아지며, 또한 벽면분류영역으로 진행하면서 홀과 홀사이의 밑부분에서 일나는 가속으로 인해 열전달성능이 향상된다. 특히 메쉬와 전열면사이의 간극을 변화시켰을 경우 정체점부근에서는 간극이 클수록, 벽면분류영역에서는 간극이 작을수록 전달성능은 향상되며 U=18m/s, H/B=s, C=1인 경우에는 메쉬를 설치하지 않은 평판보다 평균 약 44%의 열전달증진 효과과 있었다. 그리고 본 실험결과를 기존의 난류촉진체를 이용한 연구결과와도 비교 검토하였다. The objective of this research was to investigate the enhancement of heat transfer by wire mesh in impinging air jet system at the potential core region.<br/> The first experiment was carried out without mesh between nozzle exit and flat plate and the second experiment was done with mesh between them.<br/> When mesh was installed in front of the plate, heat transfer has been increased due to the acceleration between rectangular halls and divided small jet<br/> In case clearances are changed, heat transfer comes to maximum under the condition of C= 1mm, irrespective of nozzle exit velocity and H/B.<br/> Also the average heat transfer enhancement rate of a flat plate with mesh has been increased about 44% at maximum under the condition of U=18m/s, H/B=2 and C=l mm, compared to the result of a flat plate without mesh.
충돌공기분류계(衝突空氣噴流系)에서 난류촉진체(亂流促進體)의 폭변화(幅變化)가 전열증진(傳熱增進)에 미치는 영향(影響)
금성민,서정윤,Kum, S.M.,Seo, J.Y. 대한설비공학회 1994 설비공학 논문집 Vol.6 No.4
This experimental study was earned out to examine the heat transfer characteristics of a 2-dimensional impinging air jet on a flat plate with a set of square rods. The objectives of the study were to investigate the flow and heat transfer characteristics caused by the square rods and to find out the optimum rods arrangement. Experiment was carried out first without using the rods to establish the baseline heat transfer performance. Then, rods of different widths and clearances were installed to cause the turbulence on the fluid flow.
충돌분류계에서 WIRE MESH를 이용한 열전달 증진에 관한 연구
금성민,김동춘,유지오,이창언,임장순,Kum, S.M.,Kim, D.C.,Yoo, J.O.,Lee, C.E.,Yim, C.S. 한국태양에너지학회 1997 한국태양에너지학회 논문집 Vol.17 No.2
본 연구는 2차원 충돌공기분류계의 포텐셜코어 영역에서 열전달증진을 목적으로 노즐출구와 전열면사이에 메쉬를 설치한후 노즐출구 속도, 메쉬와 전열면사이의 간극, 노즐출구와 전열면사이의 거리를 변화시킬 때의 열전달특성을 메쉬를 설치하지 않은 경우와 비교 검토한 것으로 메쉬를 설치했을 때에는 분류가 전열면에 충돌하면서 소분류로 분할되어 발생하는 난류에 의해 충돌영역에서 열전달성능이 좋아지며, 또한 벽면분류영역으로 진행하면서 홀과 홀사이의 밑부분에서 일어나는 가속으로 인해 열전달성능이 향상된다. 특히 메쉬와 전열면사이의 간극을 변화시켰을 경우 정체점부근에서는 간극이 클수록, 벽면분류영역에서는 간극이 작을수록 전달성능은 향상되며 U=18m/s, H/B=2, C=1인 경우에는 메쉬를 설치하지 않은 평판보다 평균 약 44%의 열전달증진 효과과 있었다. 그리고 본 실험결과를 기존의 난류촉진체를 이용한 연구결과와도 비교 검토하였다. The objective of this research was to investigate the enhancement of heat transfer by wire mesh in impinging air jet system at the potential core region. The first experiment was carried out without mesh between nozzle exit and flat plate and the second experiment was done with mesh between them. When mesh was installed in front of the plate, heat transfer has been Increased due to the acceleration between rectangular halls and divided small jet In case clearances are changed, heat transfer comes to maximum under the condition of C=1mm, irrespective of nozzle exit velocity and H/B. Also the average heat transfer enhancement rate of a flat plate with mesh has been increased about 44% at maximum under the condition of U=18m/s, H/B=2 and C=1mm, compared to the result of a flat plate without mesh.
보일러용 3way valve 내장형 rotoless 전자식 순환펌프 시스템의 개발
한지웅(J.W.Han),금성민(S.M.Kum),유병희(B.H.Ryu),이창언(C.E.Lee),오수철(S.C.Ohu),임장순(J.S.Yim) 한국태양에너지학회 1996 한국태양에너지학회 논문집 Vol.16 No.2
본 연구는 가정용 가스 보일러 순환펌프의 문제점 보완은 물론 펌프 외부에 설치되어 있는 3way valve를 하우징 내부에 부착한 3way valve 내장형 펌프 하우징을 개발하기 위한것이다. 기존 하우징이 부착된 canned type 순환펌프의 실험결과를 근거로 3way valve 내장형 하우징을 설계 제작하였으며 신형 하우징이 부착된 canned type 순환펌프의 성능실험 및 보일러 전체 시스템에서의 순환펌프 성능 실험을 실시하였다.<br/> 실험 결과 신형 3way valve 내장형 하우징을 부착할 경우 펌프의 총양정은 평균 1~1.7m, 펌프효율은 약 25%정도 높게 나타났으며 축동력은 약 4W 감소하였다. 특히 하우징의 중량은 1.4kg에서 0.4kg으로 줄어들었고 제작비는 개당 약 5000원정도 절감할수 있었으며 조립공정의 단축으로 생산비용은 보일러 1대당 약 2만원 정도의 원가절감을 예상할수 있다. The purpose of research is to complement the circulating pump of gas boiler for the domestic and to develop a pump housing with internal three way valve: Housing and three way valve have been apart in the existing pump system.<br/> Based on the experimental result on can-typed circulating pump with existing housing, a new housing with internal three way valve was designed and manufactured. The performance of can-typed circulating pump with the new housing, and the performance of circulating pump of boiler system were tested. As a result on the test, the new housing with internal three way valve has been excellent in respect of pump performance, weight and manufacturing cost. So it is expected to have an effect of import substitution.