http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권세진(Sejin Kwon) 한국추진공학회 2008 한국추진공학회지 Vol.12 No.1
Thanks to the breakthroughs in micro fabrication technology, numerous concepts of micro aerospace systems including micro aerial vehicle, nano satellite and micro robot have been proposed. In order to activate these mobile micro systems, high density power in a small scale power source is required. However, we still do not have micro power source that has energy density that can support these systems. In the present article, status of micro power sources are described and alternatives that have been derived from the past experience are proposed.
재할당 블록을 이용한 플래시 메모리를 위한 효율적인 공간 관리 기법
권세진(Se-Jin Kwon),정태선(Tae-Sun Chung) 한국정보과학회 2007 정보과학회 컴퓨팅의 실제 논문지 Vol.13 No.7
플래시 메모리는 전원이 끊기더라도 정보를 유지할 수 있는 비 휘발성 메모리로써 빠른 접근속도, 저 전력 소비, 간편한 휴대성 등의 장점을 가진다. 플래시 메모리는 다른 메모리와 달리 “쓰기 전지우기”(erase before write) 성질과 제한된 수의 지우기 연산을 수행할 수 없는 성질을 지닌다. 이와 같은 하드웨어 특성들로 인해 소프트웨어인 플래시 변환 계층(FTL: flash translation layer)을 필요로 한다. FTL은 파일 시스템의 논리주소를 플래시 메모리의 물리주소로 바꾸어주는 소프트웨어로써 FTL의 알고리즘으로 인해 플래시 메모리의 성능, 마모도 등이 좌우된다. 이 논문에서는 새로운 FTL의 알고리즘인 EAST를 제안한다. EAST는 재할당 블록(reallocation block)을 이용한 효율적인 공간 관리 기법으로 로그 블록의 개수를 최적화 시키고, 블록 상태를 사용한 사상 기법을 사용하며, 플래시 메모리의 공간을 효율적으로 관리한다. EAST는 특히 플래시 메모리의 용량이 크고 사용하는 용량이 작을 경우 FAST보다 더 나은 성능을 보인다. Flash memory offers attractive features, such as non-volatile, shock resistance, fast access, and low power consumption for data storage. However, it has one main drawback of requiring an erase before updating the contents. Furthermore, flash memory can only be erased limited number of times. To overcome limitations, flash memory needs a software layer called flash translation layer (FTL). The basic function of FTL is to translate the logical address from the file system like file allocation table (FAT) to the physical address in flash memory. In this paper, a new FTL algorithm called an efficient and advanced space-management technique (EAST) is proposed. EAST improves the performance by optimizing the number of log blocks, by applying the state transition, and by using reallocation blocks. The results of experiments show that EAST outperforms FAST, which is an enhanced log block scheme, particularly when the usage of flash memory is not full.
이중유화법을 통하여 BSA 수용액을 PLGA 마이크로캡슐 입자에 봉입하는 과정에서의 공정변수의 영향
권세진(Sejin Kwon),구자경(Ja-Kyung Koo) 한국산학기술학회 2018 한국산학기술학회논문지 Vol.19 No.6
이중유화법을 통하여 BSA 수용액을 봉입하는 PLGA 마이크로캡슐 입자를 제조하였다. 마이크로캡슐 입자 외부의 수용액 상에서는 입자 표면의 경화를 위하여 유화제를 금속염으로 대체하였다. 제조한 마이크로캡슐 입자에 대하여서 모폴로지, 입자직경 BSA 봉입효율 및 in-vitro 방출실험을 수행하였다. 전자현미경(SEM) 촬영을 통하여 마이크로캡슐 입자는 l-7㎛ 유화액 내 내부 수용액 대비 고분자 용액의 부피 비 그리고 입자 외부 수용액에서의 금속염의 농도에 직접적인 영향을 받았다. 또한 이러한 요소는 단백질 봉입효율과 in-vitro 방출에도 일부 영향을 미쳤다. 본 실험에서 제조한 마이크로캡슐 입자는 in-vitro 방출 실험에서 초기에 높은 유속의 방출 현상을 보였다. 그렇지만 본 연구에서 제조한 마이크로캡슐 입자는 다른 연구의 결과에 비해 긴 기간 동안의 방출을 보였다. 이상의 결과를 통해 2가의 금속염이 마이크로캡슐 입자의 제조에서 유화제를 대체할 수 있는 좋은 방편이 될 수 있다는 결론을 내릴 수 있었다. PLGA microcapsule particles encapsulating BSA aqueous solutions were prepared using a water-in-oil-in-water emulsion method. The morphology, particle size, BSA encapsulating efficiency, and in-vitro release test were also studied using the microcapsule particles. In the outer aqueous phase, an emulsifier, e.g., PVA, was replaced with metal salts for surface solidification. Scanning electron microscopy (SEM) showed that the microcapsule particles had smooth surfaces and were between 1㎛ and 7㎛ in size. The micro capsule particle morphology was affected directly by the ratio between the polymer solution and inner aqueous solution, and composition of the outer aqueous solution. The factors also partially affected the BSA encapsulation efficiencies and in-vitro release rates. All the micro capsule particles showed an initial burst release through the in-vitro release test. On the other hand, the particles also showed a relatively long release period. Metal salts could be good choices to replace the emulsifier to solidify the microcapsule particle surfaces.
750-kW풍력발전기 개발을 위한 모의시험 장치의 시험
권세진(Kwon, Seijin),손윤규(Son, Yoon-Gyu),서재학(Suh, Jae-Hak),이월우(Lee, Woul-Woo),장성덕(Jang, Sung-Duk),오종석(Oh, Jong-Seok),황진수(Whang, Jin-Su),강신일(Kang, Sin-Il),권오정(Kwon, O-Jung),정진화(Chung, Chin-Wha),한경섭(Han, Ky 한국신재생에너지학회 2005 한국신재생에너지학회 학술대회논문집 Vol.2005 No.06
풍력을 이용한 풍력발전기의 전력변환 시스템을 개발하기 위해서는 바람의 특성을 정확히 분석하고 이를 대치할 수 있는 모의시험 장치인 시뮬레이터가 필수적이다. 모의시험 장치는 풍향 풍속등의 인자들을 입력받아 회전자 블레이드의 토오크를 전동기가 대신해서 발전기에 공급하게 된다 본 논문에서는 풍력발전 모의시험 장치를 이용하여 750-kW gearless형 풍력발전기의 축소모델인 20-kW 모델 발전기와 고효율의 전력변환 장치 설계 및 인버터 특성을 위한 시험용 지그에서의 시험한 결과를 보이고자 한다.
권세진(S. J. Kwon),손윤규(Y. G. Son),장성덕(S. D. Jang),오종석(J. S. Oh) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
포항가속기연구소 선형μ가속기의 대전력 RF부품의 시험과 RF증폭을 위해 사용되는 클라이스트론 튜브의 시험용 전원으로 펄스전원인 모듈레이터를 사용하고 있다. 고전적인 방식의 교류전압을 변환하여 직류로 만들고 이 전원을 L-C공진충전에 의해 펄스를 생성하는 펄스 커패시터에 약 2배의 직류전원으로 충전하는 기법을 사용하고 있다. 이들 전원은 저주파의 대용량 변압기를 사용하여 직류로 변환하는 부품들의 부피가 크다. 새로운 충전기법을 적용한 펄스전원의 경우는 고주파 인버터 전원을 채택하여 그 부피를 줄이고 지령충전에 의해 펄스를 생성하는 싸이라트론의 애노드에 고전압이 머무는 시간을 줄임으로서 자발방전이나 고전압 아크에 의한 오동작을 최소로 할 수 있다는 장점이 있다. 본 논문에서는 고주파 전원 방식을 채용한 펄스 모듈레이터의 제어방법의 개선과 부피를 줄여 운전의 효율성을 높인 내용으로 발표하고자 한다.