http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이동통신 기반 기종점 통행량 데이터를 활용한 도시 내 젠더 공간 분석
고민지(Ko, Min Jee),박상윤(Park, Sang Yoon),윤상현(Yoon, Sang Hyun),이강재(Lee, Kang Jae),주유형(Joo, Yoohyung),허준(Heo, Joon) 한국측량학회 2023 한국측량학회지 Vol.41 No.6
Urban space includes power relations between genders and is distinguished according to the role of genders. However, efforts have recently been made to realize gender equality in urban spaces, away from traditional genderized urban spaces. This is confirmed in various studies as well as urban policies, and in the past, it was mainly focused on theory, but recently, empirical studies reflecting actual urban space have been conducted. The purpose of this study is to search for urban spaces by gender by using the origin-destination data representing the actual movement of urban users. Gender differences were calculated to compare male and female movement by age, and spatial autocorrelation analysis was performed to explore gender spaces such as clusters with a lot of male visits and clusters with a lot of female visits. The results were compared with the use district of Seoul, and significant gender space could be confirmed, and it was shown that gender space occupancy differs by age.
지리가중회귀분석을 이용한 대기오염과 전국 질병 유병률과의 관계 분석
고민지(Ko, Min Jee),이강재(Lee, Kang Jae),카루나새나 샤시니(Karunasena Shashini),허준(Heo, Joon) 한국측량학회 2021 한국측량학회 학술대회자료집 Vol.2021 No.11
본 연구는 2013년, 2015년 대기오염과 전국 질병 유병률 사이의 관계를 공간적 변화를 반영하여 분석하고자 지리가중회귀분석(Geographically Weighted Regression, GWR)을 이용하여 수행하였다. 대기오염물질 데이터는 에어코리아에서 제공하는 이산화황(SO₂), 이산화질소(NO₂), 오존(O₃), 미세먼지(PM10)을 사용하였고, 전국 질병 유병률 데이터는 질병관리청 지역사회건강조사에서 제공하는 알레르기 비염, 천식, 고혈압 세 가지 질병을 사용하였다. 그 결과 년도별로 유병률에 영향을 미치는 대기오염물질이 다른 모습을 보였으며 유의수준 0.1 이내의 유의미한 결과를 확인할 수 있었다.
커패시터 케이스의 코팅 재질에 대한 성능 및 특성 비교
고민지(Min-Ji Ko),장인혁(In-Hyeok Jang),이유향(You-Hyang Lee),이민혁(Min-Hyeok Lee),송정성(Jung-Sung Song),김수경(Su-Kyoung Kim),임홍우(Hong-Woo Lim) 대한전기학회 2016 대한전기학회 학술대회 논문집 Vol.2016 No.3
본 논문은 알루미늄 전해 커패시터에 사용되는 외관 케이스의 코팅 재질에 대한 성능과 특성에 대해서 비교 연구를 하였다. 커패시터 케이스의 주 재질은 알루미늄이 사용되며 알루미늄 위에 나일론 또는 PET(Polyethylene terephthalate)를 코팅하여 사용하는데, 두 재질은 가공성과 성능 또는 가격차이가 존재한다. 본 논문은 나일론 코팅과 PET단면 코팅, 양면 코팅의 열화특성과 성능특성을 비교함으로써 제조사가 재질을 선택함에 있어서 실용적인 정보를 제공하는데 그 목적이 있다. 열화를 시키기 위한 환경시험은 실제 기후조건과 UV(Ultra Violet Light)로 인한 열화를 모의한 내후성, 가스부식시험, 고온시험, 리플로우 시험을 진행하였으며 성능을 확인하기 위하 내전압과 절연저항 특성을 측정하였다. 시험 결과 나일론은 고온에 장시간 노출되었을 때 변색이 확인되었으나 리플로우 270℃ 10회 수준에서는 변색이 확인되지 않았다. 내전압과 절연저항 등의 특성에서 PET양면코팅이 가장 우수한 특성을 나타내었다. PET코팅이 우수한 특성을 나타내지만 비교적 고가이고 물리적인 충격에 약할 수 있으므로, 실제 적용에 있어서는 단가와 사용조건에 적합한 재질이 선택되어야 한다.
등방압 적용 재활용탄소섬유강화플라스틱의 기계적 특성 분석
김정호(Jeong-Ho Kim),고민지(Min-Ji Ko),김영신(Young-Shin Kim),전의식(Euy-Sik Jeon) 한국기계가공학회 2024 한국기계가공학회지 Vol.23 No.6
Carbon fiber reinforced plastic (CFRP) is a lightweight material with excellent mechanical properties that is being used in high-value-added industries such as automotive and aviation. However, as CFRP has gained popularity as a lightweight material that can replace steel, it has also led to a surge in waste emissions, which has resulted in high social costs. Therefore, researchers proposed to remanufacture CFRP by applying recycled carbon fibers derived from CFRP waste instead of virgin carbon fibers to CFRP. In particular, among the various rCFRP manufacturing processes, the FDM(Fused Deposition Modeling) process has been attracting attention for manufacturing rCFRP, but the mechanical strength is reduced due to the low interfacial adhesion of rCF(recycled Carbon Fiber) and the inherent low interlayer bonding of the FDM process. Therefore, this study applied Isostatic Pressure method to improve the mechanical strength of rCFRP and analyzed the mechanical behavior according to pressure and time. rCFRP pellets were produced by twin screw process using rCF/ABS, and composite filaments were produced by single extrude process. After the rCFRP specimens were produced through 3D printing, post-processing was performed according to pressure and time. To evaluate the quality of the post-treated rCFRP, morphology analysis was performed using SEM(Scanning Electron Microscope), followed by mechanical strength analysis using a UTM(Universal Testing Machine). The results of this study can be used as a reference for improving the strength of rCFRP materials.
위드 코로나 시대, 기업과 문화예술계의 협력 방향 모색
손예령(Son Yeryeong),고민지(Ko Minji) 한국문화융합학회 2021 문화와 융합 Vol.43 No.9
코로나19로 인해 문화예술 분야는 그 어떠한 분야보다도 큰 피해를 입었다. OECD에서는 문화예술 분야가 가진 장소 기반 특성으로 인해 사회적 거리두기에 따른 피해가 그 어느 분야보다 크다고 밝혔다. 또한, 코로나19가언제 종식될지 알 수 없으며, 만약 종식된다고 하더라도 이러한 위기는 언제 어디서 찾아올지 모른다. 코로나19와함께 살아가야 하는 ‘위드 코로나’ 시대에 문화예술계가 이 위기를 극복하기 위해 어떻게 해야 할까? 본 연구에서는 위드 코로나 시대에 문화예술계가 이 위기를 극복하기 위해서는 기업과의 협력이 필요하다고 보았다. 최근 기업들이 사회적 가치의 실현에 자발적인 주체가 되어야 한다는 주장이 확대되면서, 많은 기업들이 지역사회와 국제사회를 위해 다양한 사회공헌 활동을 펼치고 있다. 뿐만 아니라, 기업은 문화예술 지원 및 협업을 통해 문화예술발전 및 지역사회의 문화향유 기회 확대에 기여하고 있다. 21세기는 소프트파워가 주도하는 문화의 세기로, 문화예술 분야에 대한 지원과 협업은 이제 기업에 필수적인 경영 의제로 정착되었다. 그러나 그동안 기업의 문화예술계에 대한 지원과 협력 방식이 문화예술인들의 의견을 반영하지 못하였고, 지원 및 협력 대상에 사각지대가 존재했다. 이러한 한계를 극복하기 위하여 다양한 지역에서 활동하고 있는 공연예술 및 전시예술분야 예술인을 중심으로의견조사 및 심층인터뷰를 실시하였다. 그 결과, 위드 코로나 시대에 기업과 문화예술계의 협력 방향으로, 상호 공감과 존중의 파트너십을 구축하고, 기업의 업(業)과 연계된 문화콘텐츠 개발은 물론, 모두의 힐링을 위한 문화예술백신 활용을 통해 기업과 문화예술계가 지속가능한 협력을 추진할 것을 제안하였다. 이를 통해 위드 코로나 시대에 문화예술계와 기업 간의 파트너십 구축을 위한 협력방향을 모색하는데 기여할 수 있길 기대한다. The field of arts & culture has suffered more damage than any other fields due to COVID-19. OECD indicated that the damage caused by social distancing is greater than any other fields due to the placebased characteristics of the arts & culture field. Also, it is unknown when COVID-19 will end, and even if it does, it is unknown when and where this crisis will reoccur. What should arts & culture community do to overcome this crisis in the era of with-corona where we have to live with COVID-19? In this study, it is believed that arts & culture community in the with-corona era needs to be cooperative with companies to overcome this crisis. Recently, as the argument that companies should be direct agents of realizing social values, has expanded, many companies are carrying out various social contribution activities for local communities and international communities. In addition, companies have contributed to the development of arts & culture and the expansion of opportunities for cultural enjoyment in local communities through support for and cooperation of arts & culture. Since the 21st century is a cultural century led by Soft Power, support for and collaboration with the field of arts & culture have now become an essential management agenda for companies. However, the companies’ support and cooperation methods for arts & culture community have not reflected the opinions of artists in the field, and blind spots have existed in the support and cooperation targets. In order to overcome these limitations, an opinion survey and an in-depth interview were conducted focusing on artists who are active in the fields of performing arts and exhibition arts in various regions. As a result, it is suggested that building a partnership of empathy and respect; utilization of culture and art vaccines for everyone’s healing; companies and arts & culture community are cooperative through the development of cultural contents linked to work. It is hoped that this study will be basic information to explore the direction of cooperation for the establishment of partnerships between arts & culture community and companies in this with-corona era.
장인혁 ( In Hyeok Jang ),한지훈 ( Ji Hoon Han ),고민지 ( Min Ji Ko ),이영주 ( Young Joo Lee ),임홍우 ( Hong Woo Lim ) 조선대학교 공학기술연구원 2013 공학기술논문지 Vol.6 No.2
This paper proposed a new concept of estimating method for LED(light-emitting diode) delamination with high accuracy. Usually, The LED is composed several materials which are LED chips, gold wire, phosphor, epoxy resin, adhesive, reflector and lead frame. These different materials are usually delaminated in a trouble conditions which are huge temperature difference, hot and humid or mechanical shocked. When the components are delaminated, a luminance will be lost, moisture be absorbed easily and a thermal resistance be increased attendantly. As a conventional method to estimate a delamination of LEDs, a solution immersing method is usually used in a field of LED manufacturing companies or researching institutes. This method has an advantage of simplicity but it is only shown that the existence of delamination or not. In this paper, we have proposed an estimating method for LEDs delamination using the polishing and the electron microscope. New proposed method has shown the result of confirming delamination without destruction and enabled quantitative analysis for LED delamination.