http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강호주,송희영,정명영,Kang, Ho-Ju,Song, Hui-Young,Jeong, Myung-Yung 한국마이크로전자및패키징학회 2011 마이크로전자 및 패키징학회지 Vol.18 No.4
GaN 기반의 LED에서 광 추출 효율을 정량적으로 분석하였다. Ray-Tracing기반의 시뮬레이션을 이용하여 사파이어 기판에 형성된 패턴의 형태, 크기, 깊이, 간격들을 분석하여 최적의 패턴 요소들을 도출하였다. 시뮬레이션의 결과로 최적의 패턴 형태는 반구 형태에서 높은 광 추출 효율을 보였다. 일반적인 패턴이 없는 사파이어 기판을 사용한 LED의 광 추출 효율보다 반구 형태의 패턴을 가진 사파이어 기판에서 약 40% 향상된 광 추출 효율을 보였다. The light extraction efficiency in GaN based LED was analyzed qualitatively. The extraction efficiency was simulated with patterned shape, depth, size and spacing by using ray-tracing simulation. In simulation result, patterned shape and depth for the optimized extraction efficiency in PSS LED were in indented Hemi-sphere solid. Through the optimal patterning of the various factors, about 40% enhancement in extraction efficiency was obtained.
유연 기판을 이용한 PLC소자 제작을 위한 롤투롤 공정 연구
강호주,김태훈,정명영,Kang, Ho Ju,Kim, Taehoon,Jeong, Myung Yung 한국마이크로전자및패키징학회 2015 마이크로전자 및 패키징학회지 Vol.22 No.4
저가격, 높은 생산성, 고해상도를 가지는 소자의 패턴 제작 방법에 대한 요구가 계속적으로 증가하고 있다. 롤투롤 연속생산 공정은 저비용, 대량생산이 가능한 차세대 공정으로 각광받고 있다. 본 논문에서는 PLC (planar lightwave circuit) 소자의 제작을 위해서 롤투롤 공정을 이용하여 제조하는 방법을 연구하였다. 제안한 기술은 polydimethylsiloxane (PDMS) 고분자를 이용하여 롤투롤 공정을 통해 PLC소자를 제작하는 공정을 연구하였다. 실리콘 웨이퍼에 형성된 마이크로 패턴을 복제 공정을 수행하였으며 이를 원통금형에 적용하여 롤투롤 공정의 롤 몰드(roll mold)로 사용하였다. 웹 텐션과 웹 속도의 공정 조건 최적화로 롤투롤 공정을 이용하여 PLC소자를 제작하였다. 제작된 PLC소자는 약4.0dB의 삽입손실을 가지는 $1{\times}2$ 광분배기이며, 제안한 롤투롤 공정 기술을 이용한 PLC소자의 제작 공정이 대량연속생산에 유효함을 확인하였다. Demand for a low-cost, high-throughput, and high-resolution patterning method for fabricating devices continues to increase. The roll-to-roll (R2R) imprint lithography technique has received a great deal of attention as a means of fabricating next-generation devices. In this paper, we propose a fabrication method for polymeric planar lightwave circuit (PLC) devices that uses R2R imprint lithography. The proposed technique uses an elastomeric polydimethylsiloxane (PDMS) mold. A Si wafer with micro patterns is used as the Si master. The PDMS mold is then replicated from the Si master. By applying a precise web tension and at a given web speed, we fabricated a micro-patterned PLC device. The insertion losses were 4.0 dB for a $1{\times}2$ optical splitter. As such, the proposed method of fabricating a PLC device by the R2R process was shown to be an effective solution.
조상욱,강호주,정명영,Jo, Sang-Uk,Kang, Ho-Ju,Jeong, Myung-Yung 한국마이크로전자및패키징학회 2013 마이크로전자 및 패키징학회지 Vol.20 No.3
고속, 대용량 정보 전송 수요가 급격하게 증가함에 따라 대량생산 및 고효율의 PLC형 집적 광소자의 연구가 증가하고 있다. 본 논문에서는 광소자와 광섬유가 수동 정렬이 가능하도록 일체형 정렬 구조를 제안하였다. 일체형 구조의 광소자는 기본적으로 1채널의 입력부의 광신호를 2채널의 출력부를 통해 분리하는 광분배기 구조이다. 본 연구에서 제안된 일체형 구조의 제작은 롤투롤 공정 기술을 이용하여 제작하고 그 특성을 평가하였다. 롤투롤 공정 기술은 광소자의 제작에 들어가는 시간을 절감하고 연속생산이 가능한 방법이다. 제작된 광소자의 광특성은 1550 nm의 광원을 이용하여 약3.9 dB의 삽입손실과 0.2 dB의 채널 균일도를 나타내었다. Recently, high speed transmission and large information demand have been increased. Also, researches of integrated optical device for large production and high-efficient planar lightwave circuit (PLC) have been increased. In this paper, integrated optical alignment is proposed which makes passive alignment between optical device and optical fiber possible. The integrated optical device consists of splitter structures which have one input and two outputs. The proposed integrated structure was fabricated by roll-to-roll (RTR) processing method. This method enables to manufacture continuously and the processing time can be shortened. Optical property of the fabricated optical device showed 3.9 dB insertion loss and 0.2 dB optical uniformity using the light source with 1550 nm wavelength.
토마토에서 칼슘수송체와 칼슘결합단백질 공동발현에 의한 칼슘결핍유사증상의 완화
한증술,강호주,김창길 한국식물생명공학회 2010 식물생명공학회지 Vol.37 No.4
본 연구는 칼슘 수송체의 하나인 sCAX1과 칼슘결합단백질의 하나인 CRT가 토마토에서 발현했을 때 tip-burn과배꼽썩음병 (BER)이 토마토의 전 생육기간에 걸쳐 어떠한 양상으로 나타나는지를 관찰하는 것에 초점을 맞추어수행하였고, 최종 연구 결과는 CRT 공동발현이 sCAX1 발현에 의해 야기된 병징을 억제시킬 수 있음을 확인시켰다. 양분공급이 불량한 환경하에 놓인 sCAX1 단독 발현토마토 식물체는 그 근단 조직, 정단 조직 및 과실의 암술부착부위 조직에 토마토 재배 농가포장에서 빈번하게관찰되는 칼슘결핍 증상과 일치하는 괴사현상을 나타내었다. sCAX1 형질전환체와 비형질전화체를 각각 대목과접수로 달리 사용한 교호접목 실험을 통해 sCAX1 발현에따른 tip-burn 병징이 토양으로부터의 칼슘이온 흡수에 장애를 받아 생긴 결과가 아님을 확인하였다. 형질전환을통해 CRT 발현 토마토를 획득한 후 CRT가 sCAX1에 의한불량한 특성 발현을 제어할 수 있는지 확인하기 위하여양자간 교배조합을 작성하였다. sCAX1과 CRT를 토마토에서 공동발현 시켰을 때 완벽하지는 않지만 양극 조직의 괴사와 BER이 뚜렷하게 감소되었다. 본 연구의 결과를 바탕으로 sCAX1 발현에 의해 방해 받은 세포 내 칼슘이온 관련 어떤 기구는 CRT 공동발현을 통해 복구될 수있다는 하나의 모델을 제시할 수 있을 것이다. Here we focused on tip-burn and blossom-end rot (BER) symptoms in the tomato plants expressing the constitutively active form of Ca2+/H+ antiporter (sCAX1) and/or a Ca-binding protein (calreticulin, CRT) genes during their whole growth period. Conclusively we demonstrated that CRT is able to suppress the tip-burn and BER symptoms that were induced by sCAX1. Under poor nutrition condition, tomato plants overexpressing sCAX1 showed severe necrotic collapses in both roots and shoot polar tissues, which are in accordance with Ca2+ deficient symptoms frequently observed in an agricultural cultivation of tomato. Reciprocal grafting trials using sCAX1 and wild type plants revealed that the tip-burn symptom by sCAX1 overexpression is not caused by hindrance of Ca2+ uptake from soil. We constructed CRT overexpressing transgenic tomatoes, and crossed them with sCAX1 transgenic plants to investigate the effects of CRT on the symptoms of sCAX1 transgenic plants. Coexpression of sCAX1 and CRT significantly suppressed the Ca2+ deficient symptoms of sCAX1 transgenic plants. Those results suggest the model that Ca2+ homeostasis disturbed by the overexpression of sCAX1 may be suppressed by the co-expression of CRT.
김정훈(Jung Hoon Kim),김소희(So Hee Kim),강호주(Ho Ju Kang),조상욱(Sang-Uk Cho),이태호(Tae Ho Lee),정명영(Myung Yung Jeong) Korean Society for Precision Engineering 2014 한국정밀공학회지 Vol.31 No.6
The roll to roll (RTR) imprint process is an integrated imprinting process where steps ranging from assignment of a function to a flexible rolled substrate to rewinding of the same substrate in a roll are performed. RTR imprint is a green, low-cost technology without limitations. In RTR imprint, it is important to manufacture the mold precisely and maintain uniform process condition. To this, process conditions have to include precision tension control, optimization of process parameters. We introduced RTR imprint to fabricate planar lightwave circuit (PLC) device for communication, by new schematic design and process optimization, we fabricated successfully optical device. The fabricated optical device showed the optical performance which was satisfied to meet international standard.
광소자의 광 정렬 및 연결 구조 구현용 임프린트 공정 연구
김영섭(Young Sub Kim),조상욱(Sang Uk Cho),강호주(Ho Ju Kang),정명영(Myung Yung Jeong) Korean Society for Precision Engineering 2012 한국정밀공학회지 Vol.29 No.12
Optical devices are used extensively in the field of information network. Increasing demand for optical device, optical interconnection has been a important issue for commercialization. However many problems exist in the interconnection between optical device and optical fiber, and in the case of the multi-channel, problems of the optical alignment and optical array arise. For solving the alignment and array problem of optical device and the optical fiber, we fabricated fiber alignment and array by using imprint technology. Achieved higher precision of optical fiber alignment and array due to fabricating using imprint technology. The silicon stamp with different depth was fabricated using the conventional photolithography. Using the silicon stamp, a nickel stamp was fabricated by electroforming process. We conducted imprint process using the nickel stamp with different depth. The optical alignment and array by fabricating the patterns of optical device and fiber alignment and array using imprint process, and achieved higher precision of decreasing the dimensional error of the patterns by optimization of process. The fabricated optical interconnection of PLC device was measured 3.9 dB and 4.2 dB, lower than criteria specified by international standard.