http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yuechao Zhang,Yingjie Li,Junjie Gu,Senlin Tian,Ping Ning 한국화학공학회 2018 Korean Journal of Chemical Engineering Vol.35 No.9
Supercritical water (SCW) impregnation is an efficient and feasible method that has been used to prepare highly dispersed supported catalysts, but few studies have investigated the stability of support materials in supercritical water. Thus, our aim was to investigate the hydrothermal stability of zeolite supports (ZSM-5, TS-1, ZSM-35, HY, 13X, Beta, SAPO-11 and SAPO-34) as model compounds in supercritical water. Results showed that almost all of zeolites suffered from crystallinity change, structural properties degradation, obvious desilication and dealumination. The decrease of surface areas and the collapse of crystalline structures in HY, 13X, Beta, SAPO-11 and SAPO-34 were more serious compared to ZSM-5, ZSM-35 and TS-1. The micropore areas and acidity of all SCW-treated zeolites were reduced. 13X with lower Si/Al ratio had higher hydrothermal stability than HY due to the formation of extra-framework Al (EFAL). EFAl also generated strong Lewis acid sites determined by ammonia temperature-programmed desorption and 27Al magic angle spinning nuclear magnetic resonance. Desilication and dealumination were simultaneous, and led to the increase of framework Si/Al ratio. ZSM zeolites (ZSM-5, ZSM-35 and TS-1) had higher hydrothermal stability than HY, 13X, Beta, SAPO-11 and SAPO-34 in SCW.
Yutong Zhang,Yuechao Ma,Lei Fu,Wenying Zhao 제어·로봇·시스템학회 2019 International Journal of Control, Automation, and Vol.17 No.8
This paper is concerned with the reliable robust control for semi-Markovian jump sampled-data systems. A mode-dependent Lyapunov-Krasovskii function (LKF) which fully capture the available characteristics of real sampling period is constructed. Based on the LKF approach, Newton-Leibniz condition and convex combination method, less conservative sufficient conditions are presented, which ensure that the closed-loop systems are robust asymptotically stable and extended-dissipativity. Then, actuator failures are taken into consideration, the desired sampled-data controller can be obtained by solving the linear matrix inequalities (LMIs). Finally, two numerical examples are given to illustrate the effectiveness of the proposed method.
Yanying Hou,Lujie Liu,Xingxing Zhang,Yuechao Zhu,Yongjun Qiu,Liming Zhao 한국공업화학회 2022 Journal of Industrial and Engineering Chemistry Vol.115 No.-
Ion exchange resins are promising materials for separating chitooligosaccharides (COSs) with differentdegrees of polymerization (DP). The adsorbent functional groups significantly determine the interactionswith COSs and affect their adsorption and separation efficiency. This study investigated the adsorptionbehaviors of COSs on macroporous cation exchange resins with different functional groups to clarifythe functional group effect on the adsorption of COSs with different DP, which can also help to providea theoretical basis for the selection of separation medium and optimization of the separation technicsof COSs. The results showed that the adsorption of COSs on sulfonic-acid type resin DX-10 andcarboxylic-acid type resin DC-10 were favorable, and the adsorption isotherms were in accord withthe Sips model. Adsorption thermodynamics showed that temperature had opposite effects on the tworesins’ equilibrium adsorption capacity of COSs. The diffusion coefficient of COSs on DX-10 resin wasgreater, and the affinity gap between COSs on DX-10 resin was larger than that of DC-10 resin, whichis beneficial for improving the separation resolution of COSs. In contrast, the interaction energy betweenCOSs with high DP and DC-10 resin was weaker compared with DX-10, which made the elution of COSswith high DP easier.