Acetate-assisted Synthesis of Chromium(III) Terephthalate and Its Gas Adsorption Properties

Jing-jing Zhou,Kai-yu Liu,Chun-long Kong,Liang Chen 대한화학회 2013 Bulletin of the Korean Chemical Society Vol.34 No.6

We report a facile synthetic approach of high-quality chromium(III) terephthalate [MIL-101(Cr)] by acetateassisted method in the absence of toxic HF. Results indicate that the morphology and surface area of the MIL- 101(Cr) can be tuned by modifying the molar ratio of acetate/Cr(NO3)3. The Brunauer-Emmett-Teller (BET) surface area of MIL-101(Cr) synthesized at the optimized condition can exceed 3300 m2/g. It is confirmed that acetate could promote the dissolution of di-carboxylic linker and accelerate the nucleation ratio. So the pure and small size of MIL-101(Cr) with clean pores can be obtained. CO2, CH4 and N2 adsorption isotherms of the samples are studied at 298 K and 313 K. Compared with the traditional method, MIL-101(Cr) synthesized by acetate-assisted method possess enhanced CO2 selective adsorption capacity. At 1.0 bar 298 K, it exhibits 47% enhanced CO2 adsorption capacity. This may be attributed to the high surface area together with clean pores of MIL-101(Cr).

A generalized adaptive variational mode decomposition method for nonstationary signals with mode overlapped components

Jing-Liang Liu,Fu-Lian Qiu,Zhi-Ping Lin,Yu-Zu Li,Fei-Yu Liao 국제구조공학회 2022 Smart Structures and Systems, An International Jou Vol.30 No.1

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate nonstationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

Computed Tomography Manifestations of Histologic Subtypes of Retroperitoneal Liposarcoma

Lu, Jing,Qin, Qin,Zhan, Liang-Liang,Yang, Xi,Xu, Qing,Yu, Jing,Dou, Li-Na,Zhang, Hao,Yang, Yan,Chen, Xiao-Chen,Yang, Yue-Hua,Cheng, Hong-Yan,Sun, Xin-Chen Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.15

Objective: Liposarcoma (LPS) is the most common soft tissue sarcoma and accounts for approximately 20% of all mesenchymal malignancies, often occurring in deep soft tissue of retroperitoneal space. Accurate preoperative diagnosis is therefore necessary. We explored whether computed tomography (CT) could be used to differentiate between the various types of retroperitoneal liposarcoma (RPLS). Method: Forty-seven cases of RPLS, diagnosed surgically and histologically, were analyzed retrospectively. CT features were correlated with postoperative pathological appearance. Results: The study radiologist identified 29, 11, 2, 2 and 3 RPLS as atypical lipomatous tumor/well-differentiated liposarcoma (ALT/WDL), dedifferentiated liposarcoma (DDL), myxoid/round cell liposarcoma (ML/RCL), pleomorphic liposarcoma (PL) and mixed-type liposarcoma. Analysis of CT scans revealed the following typical findings of the different subtypes of RPLS: ALT/WDL was mainly visible as a well-delineated fatty hypodense tumor with uniform density and integrity margin; DDL was marked by the combination of focal nodular density and hypervascularity. ML/RCL, PL and mixed liposarcoma showed malignant biological behaviour and CT findings need further studies. Conclusions: CT scanning can reveal important details including internal components, margins and surrounding tissues. Based on CT findings, tumor type can be roughly evaluated and biopsy location and therapeutic scheme guided.

Acetate-assisted Synthesis of Chromium(III) Terephthalate and Its Gas Adsorption Properties

Zhou, Jing-Jing,Liu, Kai-Yu,Kong, Chun-Long,Chen, Liang Korean Chemical Society 2013 Bulletin of the Korean Chemical Society Vol.34 No.6

We report a facile synthetic approach of high-quality chromium(III) terephthalate [MIL-101(Cr)] by acetate-assisted method in the absence of toxic HF. Results indicate that the morphology and surface area of the MIL-101(Cr) can be tuned by modifying the molar ratio of acetate/$Cr(NO_3)_3$. The Brunauer-Emmett-Teller (BET) surface area of MIL-101(Cr) synthesized at the optimized condition can exceed 3300 $m^2/g$. It is confirmed that acetate could promote the dissolution of di-carboxylic linker and accelerate the nucleation ratio. So the pure and small size of MIL-101(Cr) with clean pores can be obtained. $CO_2$, $CH_4$ and $N_2$ adsorption isotherms of the samples are studied at 298 K and 313 K. Compared with the traditional method, MIL-101(Cr) synthesized by acetate-assisted method possess enhanced $CO_2$ selective adsorption capacity. At 1.0 bar 298 K, it exhibits 47% enhanced $CO_2$ adsorption capacity. This may be attributed to the high surface area together with clean pores of MIL-101(Cr).

Association of XRCC3 Thr241Met Polymorphisms and Gliomas Risk: Evidence from a Meta-analysis

Liang, Hong-Jie,Yan, Yu-Lan,Liu, Zhi-Ming,Chen, Xu,Peng, Qi-Liu,Wang, Jian,Mo, Cui-Ju,Sui, Jing-Zhe,Wu, Jun-Rong,Zhai, Li-Min,Yang, Shi,Li, Tai-Jie,Li, Ruo-Lin,Li, Shan,Qin, Xue Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.7

The relationship between the X-ray repair cross-complementing group 3 (XRCC3) Thr241Met polymorphism and gliomas remains inclusive or controversial. For better understanding of the effect of XRCC3 Thr241Met polymorphism on glioma risk, a meta-analysis was performed. All eligible studies were identified through a search of PubMed, Elsevier Science Direct, Excerpta Medica Database (Embase) and Chinese Biomedical Literature Database (CBM) before May 2013. The association between the XRCC3 Thr241Met polymorphism and gliomas risk was conducted by odds ratios (ORs) and 95% confidence intervals (95% CIs). A total of nine case-control studies including 3,533 cases and 4,696 controls were eventually collected. Overall, we found that XRCC3 Thr241Met polymorphism was significantly associated with the risk of gliomas (T vs. C: OR=1.10, 95%CI=1.01-1.20, P=0.034; TT vs. CC: OR=1.30, 95%CI=1.03-1.65, P=0.027; TT vs. TC/CC: OR=1.29, 95%CI=1.01-1.64, P=0.039). In the subgroup analysis based on ethnicity, the significant association was found in Asian under four models (T vs. C: OR=1.17, 95%CI=1.07-1.28, P=0.00; TT vs. CC: OR=1.79, 95%CI=1.36-2.36, P=0.00; TT vs. TC/CC: OR=1.75, 95%CI=1.32-2.32, P=0.00; TT/TC vs. CC: OR=1.11,95% CI=1.02-1.20). This meta-analysis suggested that the XRCC3 Thr241Met polymorphism is a risk factor for gliomas, especially for Asians. Considering the limited sample size and ethnicities included in the meta-analysis, further large scale and well-designed studies are needed to confirm our results.

Theoretical and Experimental Investigations of the Optical Properties of Ge2Sb2Te5 for Multi-State Optical Data Storage

Jing Li,Song-You Wang,Ming Xu,Shen-Jin Wei,Song Wu,Fei Pei,Liang-Yao Chen,Yu Jia 한국물리학회 2008 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.53 No.4

Ge2Sb2Te5 (GST) is widely used as an excellent data recording material based on its fast and reversible amorphous-to-crystalline phase transformation that is accompanied by changes in the optical reflectivity and the electrical conductivity. It was demonstrated that GST can be transformed reversibly between the amorphous and the cubic phases, and, under certain conditions, it can be transformed between the cubic and the hexagonal phases as well. Thus, if we can take advantage of the differences in the optical and the electrical properties among the amorphous, the cubic, and the hexagonal states, we could use GST as a multi-state storage material, and its storage density would be improved remarkably. In this study, we investigate the electronic and the optical properties of crystalline GST by using both ab-initio and experimental analyses. The results show that the cubic GST is semi-conductive while the hexagonal GST may exhibit much higher conductivity. The reflectivity contrast of the two crystalline states is above 8 % in the range from 400 nm to 700 nm, indicating a potential for applications of GST in multi-state optical data storage.

Branched polymeric prodrug/programmed cell death 4 complexes for combinational cancer therapy

Yu‑Jing He,Lei Xing,Peng‑Fei Cui,Jia‑Liang Zhang,Jian‑Bin Qiao,Cheng‑Qiong Luo,Ge Jiang,Hu‑Lin Jiang 한국약제학회 2017 Journal of Pharmaceutical Investigation Vol.47 No.2

Here, we demonstrate a co-delivery system constructed by integrating chemotherapeutic molecules into branched polymeric prodrug which can condense nucleic acids. Demethylcantharidate (DCA) was chosen as a model drug and premodified through nucleophilic substitution reaction by its two carboxylic groups with allyl chloride. The synthesized intermediate (DCA-dially) was then used to polymerize with tris (2-aminoethyl) amine (TAEA) through progressively ammonolysis reaction. The obtained poly (DCA-alt-TAEA) (DCAT) was used to pack PDCD4 into spherical-like nanoparticles through electrostatic interaction. Gel retardation assays implied that DCAT could integrate DNA at the weight ratio of 1 and protect it from digestion by nuclease. Acid-base titration experiments showed that DCAT obtained preferable buffering capability which was beneficial for the endosomal escape of DCAT/PDCD4 complexes. Cellular tests involving gene transfection efficiency and cytotoxicity indicated that DCA and PDCD4 co-delivered by the complexes significantly and synergistically suppressed the viability of SMMC-7721 cells. These results suggest that integrating chemotherapeutic molecules into nucleic acid-packing polymeric prodrug as cationic polymer/PDCD4 complexes is a highly efficient way to co-deliver chemotherapeutic drugs and nucleic acids for cancer therapy.

Is transurethral needle ablation of prostate out of fashion? Outcomes of single session office-based transurethral needle ablation of prostate in patients with symptomatic benign prostatic hyperplasia

Yu Xi Terence Law,Wei Jing Kelven Chen,Liang Shen,Wei Jin Chua 대한비뇨의학회 2019 Investigative and Clinical Urology Vol.60 No.5

Purpose: Transurethral needle ablation (TUNA) is a minimally invasive procedure for the treatment of symptomatic benign prostatic hyperplasia (BPH). Compared to transurethral resection of the prostate (TURP), office-based TUNA is an attractive alternative as it is minimally invasive and avoids general anaesthesia. The aim of this study is to evaluate the efficacy of single session office-based TUNA. Materials and Methods: Data of 121 patients who had undergone TUNA was retrieved from June 2008 to March 2017. Patients were followed-up with visits at 1, 3, 6, and 12-months with the International Prostate Symptom Score (IPSS), quality of life (QoL) scoring and uroflowmetry. Results: Patients were 39 to 85 years old. The prostate volumes were 20.00 to 96.90 mL with a median of 26.95 mL. The median IPSS score pre-TUNA was 19, median QOL score pre-TUNA was 4 and median maximum urinary flow (Qmax) pre-TUNA was 10.3 mL/s. There is 65% improvement of IPSS post-TUNA (p<0.001). There is 75% improvement of QOL post-TUNA QOL (p<0.001). There is 35% improvement of Qmax post-TUNA Qmax (p<0.001). The mean relapse-free survival for TUNA is 6.123 years. The 1st, 3rd, and 5th year relapse-free survival rate were 91.7%, 76.6% and 63.7% respectively. Conclusions: Our study is the first to investigate the use of a single-setting office-based TUNA requiring minimal sedation in the Asian community. Complication rates were low in our series, with no associated mortality. When applied to selected patients, TUNA is an effective and reasonably safe alternative for the treatment of symptomatic BPH.

DEVELOPMENT OF CHINA LIGHT-DUTY VEHICLE TEST CYCLE

Yu Liu,Zhi Xin Wu,Hua Zhou,Han Zheng Nan Yu,Xiao Pan An,Jing Yuan Li,Meng Liang Li 한국자동차공학회 2020 International journal of automotive technology Vol.21 No.5

Driving cycles provide a basis for vehicle development and calibration and also serves as the foundation for energy consumption and emissions certification of vehicles. This paper presents the China Light-Duty Vehicle Test Cycle (CLTC) developed by the China Automotive Technology & Research Center (CATARC). First, the important steps and technical routes toward the CLTC development process are summarized. Second, the specific CLTC development process is presented in detail, including the data acquisition and data analysis procedures, weighting factor development and driving cycle construction. Then, the main driving characteristics of the New European Driving Cycle (NEDC), the Worldwide Harmonized Light-Duty Vehicles Test Cycle (WLTC), the Federal Test Procedure (FTP-75), the CLTC and the actual collected data are compared. The CLTC has low average speed, a high idle speed ratio and more frequent acceleration and deceleration characteristics. Finally, 70 vehicles are t ested based on the NEDC, WLTC, and CLTC according to their legislative procedures in the vehicle emission laboratories of the CATARC and the manufacturers. The results show that the CLTC’s fuel consumption is much higher than that of the NEDC and WLTC, and CLTC can effectively reflect the actual fuel consumption of users.

Adaptive Tracking Control of a Class of Nonlinear Systems with Input Delay and Dynamic Uncertainties Using Multi-dimensional Taylor Network

Yu-Qun Han,Wen-Jing He,Na Li,Shan-Liang Zhu 제어·로봇·시스템학회 2021 International Journal of Control, Automation, and Vol.19 No.12

This paper concerns on the control problem of a class of nonlinear systems with input delay and dynamic uncertainties using multi-dimensional Taylor Network (MTN) control method. Firstly, a new variable is introduced to eliminate the effect of input delay by combining Padé approximation with Laplace transformation. Secondly, a MTN-backstepping-based control strategy is constructively designed by introducing a new coordinate transformation, and the proposed controller has the advantages of simple structure and good real-time performance. Finally, the effectiveness of the proposed MTN-based control approach is demonstrated by three examples.