http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Novel K/Ka Bandpass Filters using LIGA Micromachined Process
Park, K. Y.,Park, J. Y.,Choi, H. K.,Lee, J.C.,Lee, B.,Kim, J. H.,Kim, N. Y.,Park, J. Y.,Kim, G. H.,Kim, D. W.,Bu, J. U.,Chung, K. W. The Korean Institute of Electromagnetic Engineerin 2000 한국전자파학회논문지 Vol.11 No.6
New class of three dimensional (3-D) micromachined microwave planar filters at K and Ka-band are presented using LIGA micro-machined process. The K-and Ka-band filters show wide bandpass characteristics of~36% and ~39% with the insertion loss 1.26dB at 19.11GHz and 1.7dB at GHz, respectively. These filters can be applicable in high power MMIC of MIMIC.
Development of the 3.7 GHz LHCD System on HL-2A
B. Lu,M. Huang,H. Zeng,X. Y. Bai,X. H. Mao,Z. H. Lu,J. Liang,Z. H. Kang,M. W. Wang,K. Feng,H. Wang,C. Wang,J. Q. Wang,S. Wei,T. Yao,Y. N. Bu,J. Feng,G. Y. Cheng,S. D. Song,D. H. Xia,J. Rao 한국물리학회 2014 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.65 No.8
A 2 MW-3.7 GHz lower hybrid current drive (LHCD) system is under development for physicsexperiments on the HL-2A device. The RF Power is generated by four TH2103A klystron amplifiersand propagates in the TE10 mode through WR284 waveguides. The transmission lines with a lengthof 20 m to 30 m are pressurized with 2 bars of nitrogen to decrease the possibility of arcing. Thelauncher, based on the passive-active multi-junction (PAM) concept, has been developed and iscurrently being realized. It was designed for a power spectrum peaked at Nk = 2.75 with goodcoupling properties over a wide range of plasma parameters. The four klystrons are fed by ahigh-voltage power supply (HVPS) based on the pulse step modulation (PSM) concept with a fastswitch-off time of less than ten μs. This system is expected to be in operation within 1 years and willexplore many international thermonuclear experimental reactor (ITER) related LH experiments inthe following years.
Micromachined Millimeter-Wave Cavity Resonators
Song, K.J.,Yoon, B.S.,Lee, J.C.,Lee, B.,Kim, J.H.,Kim, N.Y.,Park, J.Y.,Kim, G.H.,Bu, J.U.,Chung, K.W. The Korean Institute of Electromagnetic Engineerin 2001 한국전자파학회논문지 Vol.12 No.1
In this paper, micromachined millimeter-wave cavity resonators ar presented. One-port and two-port cavity resonators at Ka-band are designed using 3D design software, HP $HFSS^{TM}$ ver. 5.5 Cavity resonators are fabricated on Si substrate, which is etched down for the cavity, bonded with a Quartz wafer in which metal patterns for the feeding line coupling slot are formed. One-port resonator shows the resonant frequency of 39.34 GHz, the return loss of 14.5 dB, and the loaded $Q(Q_{L})$ of 150. Two-port cavity resonator shows the resonant frequency of 39 GHz, the insertion and return losses of 4.6dB and 19,9dB, the loaded($Q_{L}$) and unloaded $Q(Q_{U})$) of 44.3 and 107, respectively.