A Novel Resource Scheduling Scheme for CoMP Systems

( Wen`an Zhou ),( Jianlong Liu ),( Yiyu Zhang ),( Chengyi Yang ),( Xuhui Yang ) 한국인터넷정보학회 2017 KSII Transactions on Internet and Information Syst Vol.11 No.2

Coordinated multiple points transmission and reception (CoMP) technology is used to mitigate the inter-cell interference, and increase cell average user normalized throughput and cell edge user normalized throughput. There are two kinds of radio resource schedule strategies in LTE-A/5G CoMP system, and they are called centralized scheduling strategy and distributed scheduling strategy. The regional centralized scheduling cannot solve interference of inter-region, and the distributed scheduling leads to worse efficiency in the utilize of resources. In this paper, a novel distributed scheduling scheme named 9-Cell alternate authorization (9-CAA) is proposed. In our scheme, time-domain resources are divided orthogonally by coloring theory for inter-region cooperation in 9-Cell scenario [6]. Then, we provide a formula based on 0-1 integer programming to get chromatic number in 9-CAA. Moreover, a feasible optimal chromatic number search algorithm named CNS-9CAA is proposed. In addition, this scheme is expanded to 3-Cell scenario, and name it 3-Cell alternate authorization (3-CAA). At last, simulation results indicate that 9/3-CAA scheme exceed All CU CoMP, 9/3C CU CoMP and DLC resource scheduling scheme in cell average user normalized throughput. Especially, compared with the non-CoMP scheme as a benchmark, the 9-CAA and 3-CAA have improved the edge user normalized throughput by 17.2% and 13.0% respectively.

Investigation of Quench Sensitivity and Microstructure Evolution During Isothermal Treatment in 2195 Al–Li Alloy

Zhiwu Zhang,Youping Yi,Wen You,Shiquan Huang,Yonglin Guo,Hailin He 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.6

To investigate the quenching sensitivity of the 2195 Al–Li alloy rolled sheet and guide the design of the quenching process,the time–temperature-property (TTP) curves of this material were researched through interrupted quenching experiments. The differential scanning calorimetry (DSC) and transmission electron microscope (TEM) were used to characterize theevolution of precipitates during isothermal treatment. The results of this essay demonstrated that the nose temperature of 2195Al–Li alloy is around 370 °C and the temperature range of quenching sensitivity is 340 °C to 400 °C. The microstructureobservation revealed that the T1particles precipitate and grow rapidly at the temperature from 340 to 400 °C, which is dueto the high nucleation rate of phase and fast solute diffusion kinetics, especially at the nose temperature. The needle-shapedθ′/θ″ and T1particles grow up quickly as the isothermal preservation time prolonged, leading to the decrease of the supersaturatedsolid solution of the matrix. This will reduce the number of the age-induced precipitate and weaken the subsequentage hardening effect. Therefore, the rate of cooling should be increased in the quenching sensitivity range (340–400 °C) toinhibit the precipitation of the second phase and obtain excellent mechanical properties. While in other temperature ranges,the cooling rate should be decreased appropriately to reduce residual stress. The appropriate average cooling rate is recommendedto be around 13 °C s−1 at the temperature from 340 to 400 °C.

Enhancing Astaxanthin Accumulation in Haematococcus pluvialis by Coupled Light Intensity and Nitrogen Starvation in Column Photobioreactors

( Wen-wen Zhang ),( Xue-fei Zhou ),( Ya-lei Zhang ),( Peng-fei Cheng ),( Rui Ma ),( Wen-long Cheng ),( Hua-qiang Chu ) 한국미생물 · 생명공학회 2018 Journal of microbiology and biotechnology Vol.28 No.12

Natural astaxanthin mainly derives from a microalgae producer, Haematococcus pluvialis. The induction of nitrogen starvation and high light intensity is particularly significant for boosting astaxanthin production. However, the different responses to light intensity and nitrogen starvation needed to be analyzed for biomass growth and astaxanthin accumulation. The results showed that the highest level of astaxanthin production was achieved in nitrogen starvation, and was 1.64 times higher than the control group at 11 days. With regard to the optimization of light intensity utilization, it was at 200 μmo/m2/s under nitrogen starvation that the highest astaxanthin productivity per light intensity was achieved. In addition, both high light intensity and a nitrogen source had significant effects on multiple indicators. For example, high light intensity had a greater significant effect than a nitrogen source on biomass dry weight, astaxanthin yield and astaxanthin productivity; in contrast, nitrogen starvation was more beneficial for enhancing astaxanthin content per dry weight biomass. The data indicate that high light intensity synergizes with nitrogen starvation to stimulate the biosynthesis of astaxanthin.

Fabrication of Photopolymer Hierarchical Micronanostructures by Coupling Electrospinning and Photolithography for SERS Substrates

Wen-Yi Zhang,Xin-Ze Xiao,Chao Lv,Jia Zhao,Gong Wang,Xuan Gu,Ran Zhang,Bin-Bin Xu,Dan-Dan Zhang,Ai-Wu Li,Yong-Lai Zhang,Hong-Bo Sun 한국고분자학회 2013 Macromolecular Research Vol.21 No.3

Reported here is the fabrication of photopolymer hierarchical micronanostructures through a combinative process of electrospinning and subsequent photolithography. Electrospun SU-8 (epoxy-based negative photoresist)nanofiber films have been patterned into gratings with periods of 100, 200, 300, and 400 μm, respectively. Deposition of a silver nanolayer on these interlaced nanofiber films would lead to the formation of various plasmonic nanostructures,and therefore, giving rise to abundant surface-enhanced Raman scattering (SERS) “hot spots”. In the detection of Rhodamine 6G (R6G), probing molecule, the resultant SERS substrates show both high sensitivity and good reproducibility. The SERS enhancement factor could reach as high as ~108, indicating high efficiency. The fabrication of patterned, highly efficient SERS substrates may hold a great promise for the integration of SERS substrates in various microdevices such as microfluidic chips.

Impact of Adjuvant Chemotherapy Cycles on Prognosis of Resectable Stomach Cancer: A Retrospective Analysis

Zhang, Wen-Ying,Zhang, Wen-Jun,Bai, Yu,Yuan, Hai-Hua,Liu, Feng,Gao, Jun,Gong, Yan-Fang,Jiang, Bin Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.1

Aims: The aim of this study was to investigate the effects of adjuvant chemotherapy cycles on the prognosis of patients with post-operative stomach cancer through retrospective analysis. Methods: A total of 128 patients with gastric cancer who underwent gastrectomy, followed by adjuvant chemotherapy consisting of epirubicin, cisplatin or oxaliplatin, leucovorin, and 5-fluorouracil, according to a defined schedule, were divided into three groups according to the number of chemotherapy cycles: Group I (<6 cycles); Group II (6 cycles); and Group III (>6 cycles). Results: The 5-year overall survival (OS) was 20.8% in Group I, 45.0% in Group II, and 42.9% in Group III, with a median follow-up of 43 months. The 5-year relapse-free survival (RFS) was 15.1% in Group I, 40% in Group II, and 40% in Group III. The OS and RFS in Groups II and III were significantly better than in Group I (OS, p = 0.002 and p=0.003; RFS, P<0.001 and P=0.002). There was no difference in OS (p = 0.970) or in RFS (p = 0.722) between Groups II and III. Multivariate Cox hazard analysis determined that the number of adjuvant chemotherapy cycles was an independent factor that influenced OS and RFS. Conclusion: Six cycles of adjuvant chemotherapy gave encouraging outcomes in patients with resectable gastric cancer. Further prospective randomized controlled investigations are warranted in a multi-center setting.

Reduction of the contact resistance in copper phthalocyanine thin film transistor with UV/ozone treated Au electrodes

Jun Li,Liang Zhang,Xiao-Wen Zhang,Hao Zhang,Xue-Yin Jiang,Dong-bin Yu,Wen-Qing Zhu,Zhi-Lin Zhang 한국물리학회 2010 Current Applied Physics Vol.10 No.5

Bottom-contact (BC) copper phthalocyanine (CuPc) thin film transistor with UV/ozone treated Au as a source/drain electrode was fabricated and the contact resistance was estimated from the transmission line method (TLM). Comparing the properties of OTFT with untreated Au electrode, the performance of the BC CuPc-TFT with the UV/ozone treated Au electrodes was significantly improved: saturation mobility increased from 4.69 × 10−3 to 2.37 × 10−2 ㎠/V s, threshold voltage reduced from −29.1 to −6.4 V, and threshold swing varied from 5.08 to 2.25 V/decade. The contact resistance of the device with UV/ozone treated Au electrodes was nearly 20 times smaller than that of the device with untreated Au electrodes at the gate voltage of −20 V. This result indicated that using the UV/ozone treated Au electrode is an effective method to reduce the contact resistance. The present BC configuration with UV/ozone treated Au electrodes could be a significant step towards the commercialization of OTFT technology.

Characteristic Trend Analysis of Cancer Patients Hospitalized in Shanxi Tumor Hospital for the First Time during 2001 and 2010

Zhang, Wen-Li,Wang, Yan,Han, Cun-Zhi Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.9

To observe and analyze the characteristic trend of cancer patients hospitalized for the first time in Shanxi Tumor Hospital from 2001 to 2010, clinical data including case number, age, gender, and frequency of different tumor occurrences were collected and statistically analyzed. Results: (i) From 2001 to 2010, the number of cancer patients hospitalized for the first time increased by 1.3-fold; (ii) The patient overall average age also increased from 51.8 to 54.4, for males from 55.5 to 58.7 and females from 48.4 to 51.1, respectively. (iii) Male patients accounted for 43-48% and females accounted for 52-57% of the total. The percentage of female patients was higher than that of male patients in every year and showed an upward trend over the years, while that of the males showed a downward trend (${\chi}^2=7.031$, p=0.008); (iv) Among the top 6 most common cancers, lung, cervical, esophageal, colorectal and breast cancers tended to increase over the years (p<0.05), but not gastric cancer (p=0.423). Conclusions: (i) The number of cancer patients hospitalized for the first time during the past 10 years increased year by year, and was higher for female than male; (ii) the average age of patients increased year after year and was greater for male than female; (iii) the number of patients with lung cancer, cervical cancer, esophageal cancer, colorectal cancer and breast cancer increased over years.

A method for nonlinear aerostatic stability analysis of long-span suspension bridges under yaw wind

Wen-Ming Zhang,Yao-Jun Ge,Marc L. Levitan 한국풍공학회 2013 Wind and Structures, An International Journal (WAS Vol.17 No.5

By using the nonlinear aerostatic stability theory together with the method of mean wind decomposition, a method for nonlinear aerostatic stability analysis is proposed for long-span suspension bridges under yaw wind. A corresponding program is developed considering static wind load nonlinearity and structural nonlinearity. Taking a suspension bridge with three towers and double main spans as an example, the full range aerostatic instability is analyzed under wind at different attack angles and yaw angles. The results indicate that the lowest critical wind speed of aerostatic instability is gained when the initial yaw angle is greater than 0°, which suggests that perhaps yaw wind poses a disadvantage to the aerostatic stability of a long span suspension bridge. The results also show that the main span in upstream goes into instability first, and the reason for this phenomenon is discussed.

A Robust Fault Location Algorithm for Single Line-to-ground Fault in Double-circuit Transmission Systems

Wen-Hao Zhang,Umar Rosadi,Myeon-Song Choi,Seung-Jae Lee,Ilhyung Lim 대한전기학회 2011 Journal of Electrical Engineering & Technology Vol.6 No.1

This paper proposes an enhanced noise robust algorithm for fault location on double-circuit transmission line for the case of single line-to-ground (SLG) fault, which uses distributed parameter line model that also considers the mutual coupling effect. The proposed algorithm requires the voltages and currents from single-terminal data only and does not require adjacent circuit current data. The fault distance can be simply determined by solving a second-order polynomial equation, which is achieved directly through the analysis of the circuit. The algorithm, which employs the faulted phase network and zero-sequence network with source impedance involved, effectively eliminates the effect of load flow and fault resistance on the accuracy of fault location. The proposed algorithm is tested using MATLAB/Simulink under different fault locations and shows high accuracy. The uncertainty of source impedance and the measurement errors are also included in the simulation and shows that the algorithm has high robustness.

A Robust Fault Location Algorithm for Single Line-to-ground Fault in Double-circuit Transmission Systems

Zhang, Wen-Hao,Rosadi, Umar,Choi, Myeon-Song,Lee, Seung-Jae,Lim, Il-Hyung The Korean Institute of Electrical Engineers 2011 Journal of Electrical Engineering & Technology Vol.6 No.1

This paper proposes an enhanced noise robust algorithm for fault location on double-circuit transmission line for the case of single line-to-ground (SLG) fault, which uses distributed parameter line model that also considers the mutual coupling effect. The proposed algorithm requires the voltages and currents from single-terminal data only and does not require adjacent circuit current data. The fault distance can be simply determined by solving a second-order polynomial equation, which is achieved directly through the analysis of the circuit. The algorithm, which employs the faulted phase network and zero-sequence network with source impedance involved, effectively eliminates the effect of load flow and fault resistance on the accuracy of fault location. The proposed algorithm is tested using MATLAB/Simulink under different fault locations and shows high accuracy. The uncertainty of source impedance and the measurement errors are also included in the simulation and shows that the algorithm has high robustness.