Poster Session : PS 0831 ; Upper GI Tract : Clinical Factors to Predict Angiographically Detectable Non-Variceal Upper Gastrointestinal Bleeding in Patients Refractory to Endoscopic Treatment

( Tae Hwan Ha ),( Tae Hoon Oh ),( Sung In Yu ),( Min Kim ),( Jong Wook Kim ),( Won Ki Bae ),( Jae Hyung Kim ),( Seung Suk Baek ),( Mi Jin Ryu ),( Ye Na Choi ),( Ji Young Park ),( Eileen L Yoon ),( Tae 대한내과학회 2014 대한내과학회 추계학술대회 Vol.2014 No.1

Background: Non-variceal upper GI bleeding (NVUGIB) is a common medical problem that has signifi cant association with morbidity and mortality. Angiographic detection and subsequent transarterial embolization (TAE) is a primary treatment option when medical and endoscopic treatments fail. We investigated clinical factors that could affect the success of the angiographic detection and prognosis after TAE in patients with NVUGIB refractory to endoscopic therapy. Methods: A retrospective analysis of the clinical data was done in patients with failed endoscopic treatment who underwent angiography for the treatment of acute NVUGIB between May 2002 and May 2013. Patients were divided into detection or non-detection groups according to the presence of bleeding stigmata in angiographic fi nding. Rebleeding defi ned as subsequent bleeding event within 7 days and mortality within 30days were analyzed as outcome parameters after TAE following detection in angiography. Results: A total 45 patients 37 (male, mean age, 65.9±14.9 years) were analyzed and classifi ed as a detection group (n=25, 55.5%) and non-detection group (n=20, 44.6%). Peptic ulcers were the most common cause of refractory NVUGIB. Larger transfusion amount (5.7±3.9 unit vs. 3.5±2.8 unit; P=0.03), prolonged aPTT level (34.2±17.3 sec vs. 21.8±13.8 sec; P=0.01) and short time interval between last endoscopy and angiography (17.5±25.9 hours vs. 34.3±59.5 hours; P=0.04) were found to be signifi cant factors for predicting angiographic detection. TAE was performed in all patients detected in angiography. Rebleeding (44%) was significantly associated with higher Rockall score (8.3±1.5 vs. 6.6±2.4; P=0.046) and mortality (12%) was signifi cantly associated with higher Rockall score (9.3±0.6 vs. 7.1±2.2; P=0.002) and higher level of BUN (55.3±47.4 vs. 27.6±17.4; P=0.01). Conclusions: Clinical characteristics associated with angiographic detection in patients with NVUGIB refractory to endoscopic therapy were severe bleeding, bleeding tendency and early angiographic intervention. The Rockall score is useful parameter for predicting rebleeding and mortality after TAE.

돈분뇨 액비 시용이 양파의 생육, 양분흡수량 및 토양 화학성에 미치는 영향

이종태(Jong Tae Lee),하인종(In Jong Ha),김희대(Hee Dae Kim),문진성(Jin Seong Moon),김우일(Woo Il Kim),송원두(Won Doo Song) 한국원예학회 2006 원예과학기술지 Vol.24 No.2

벼와 양파 2모작 논토양에서 효율적인 돈분뇨 액비 시용을 위하여 액비 시용에 따른 양파의 생육, 양분흡수량 변화와 토양의 이화학적 특성을 조사하였다. 사용된 액비의 질소, 인산 및 칼륨 함량은 각각 4.2, 0.34, 1.2g kg⁻¹ 등이었다. 추비용 액비는 시용 10일 전에 물로 2배 희석하여 월 2회씩 4회와 6회로 나누어 시용하였다. 기비는 질소표준시비량 기준으로 19,280kg ha⁻¹로 시용하였으며 추비에 사용된 액비량은 101,910kg ha⁻¹이었다. 양파의 초장은 정식 136일 후부터 186일까지 급격히 증가하였으며 화학비료구, 액비기비+화학비료 추비구 및 액비기비+액비 4회 추비구 간에는 차이가 없었으나 무비구와 액비전량 기비구는 양분부족으로 생육이 저조하였다. 구 비대초기의 구경은 무비구에서 가장 컸으나 그 이후 화학비료구와 액비시용구에서 크게 증가하였다. 엽 생체중의 변화는 초장과 유사한 경향을 보인 반면 구 생체중은 구경과 비슷한 경향을 나타내었다. 초장과 엽중은 화학비료구와 액비전량 기비구 및 액비기비+액비 6회 추비구간 다소 작았으나 구경, 구중 및 엽수는 처리간 차이가 뚜렷하지 않았다. 양파 구와 잎의 양분흡수량은 전 생육기간에 시그모이드 형을 나타내었으며 잎과 구의 양분흡수량은 각각 잎과 구의 생육이 진전됨에 따라 증가하는 경향이었다. 화학비료구와 액비기비+화학비료 추비구 및 액비 4회 추비구간에 양분흡수량의 차이는 없었고 액비전량 기비구에서 잎의 질소와 칼륨흡수량이, 구의 질소흡수량이 화학비료구보다 적었다. 무비구는 질소, 칼륨 및 마그네슘 흡수량이 다른 처리구보다 적었다. 액비기비+액비 4회 추비구에서 질소와 인산이용률이 각각 23.5%, 13.2%로 가장 높았으나 액비기비+액비 4회 추비구에서 칼륨이용률이 높았고 상품 수량도 55.0Mg ha⁻¹로 가장 많았다. 구의 질소, 인산 및 칼륨함량은 생육이 진전됨에 감소하는 경향이었고 잎의 질소함량은 생육초기에 가장 많은 반면 칼륨함량은 구비대 초기에 가장 많았다. 수확 후 토양 pH, 질산태 질소, 교환성 칼륨 및 EC 농도는 화학비료구보다 액비시용구에서 약간 증가하였다. 본 연구 결과를 종합해 볼 때 돈분뇨 액비를 기비로 시용하고 3배 희석한 액비를 2월과 3월에 4회 추비하면 균형적인 양분공급이 가능하고 적정 수량도 확보할 수있었다. This study was carried out to evaluate the effect of liquid pig manure (LPM) on the nutrient uptake, yield of onion and soil properties. The LPM applied to onion field contained 4.2 g kg⁻¹ N, 0.34 g kg⁻¹ P, 1.2 g kg⁻¹ K and it was diluted with water by 1:2 for top-dressing, which was applied separately 4 or 6 times from February to April. The LPM application rate for basal fertilization was 19,280 kg ha⁻¹ which included 80 kg N, 6.6 kg P, and 22 kg K. The application rate for top-dressing was 101,910 kg ha⁻¹ which included 160 kg N, 13 kg P, and 53 kg K. The plant height was not almost different among treatments until 136 days after planting. Thereafter, it enlarged abruptly until 186 days, on May 4. The significant difference among CF and LPM + top-dressing by CF or LPM I was not shown, but no fertilizer and LPM only (it was applied totally as basal fertilization) made plant height of onion lessen at the maximum growth stage because of insufficient nutrients. The plant diameter increased after 136 days, and there was a significant difference between CF or LPM and no fertilizer from 186 days after planting. The leaf weight was similar tendency to plant height while bulb weight was similar to plant diameter. The amount of nutrient uptake in leaf coincided with leaf growth and the nutrient uptake in bulb swelled simultaneously with bulb growth. The difference between CF and LPM + top-dressing by CF or LPM I was not significant in nutrient uptake of onion leaf and bulb. But LPM only decreased in nitrogen and potassium of leaf and in nitrogen of bulb. And no fertilizer made a remarkable difference to others in nitrogen, potassium and magnesium of leaf and bulb. The utilization of nitrogen and phosphorus in LPM + top-dressing by CF were 23.5%, 13.2% respectively, more than the others. The LPM + top-dressing by LPM I was most available with potassium, and it leaded the most abundant marketable yield by 55.0 t ha⁻¹ as well. The nitrogen, phosphorus, and potassium contents in bulb were inclined to decrease with progress of onion growth. The nitrogen contents in leaf maximized at the initial growth stage while potassium contents increased at the initial bulbing stage. The LPM application increased pH, nitrate nitrogen, potassium and EC in soil more than chemical fertilizer (CF) did.

Extruder에서 가교된 EPDM과 HDPE 블랜드의 물성에 관한 연구

하창식,양병태,이진국 부산대학교 공과대학 1986 硏究報告 Vol.31 No.-

The blends of Ethylene-propylene-diene [terpolymer(EDPM) and high density polyethylene (HDPE) have been]prepared by the process 「dynamic curing」that depending on carrying out both blending and a crosslinking reaction at the same time in extruder. Throughout the experimental ranges, the dynamically cured polyblends were shown to be thermoplastic except for highly crosslinked blends of high portions of EPDM. From the DSC determination, the crystallinity decreased with the increasing crosslinking density. The behaviors of melt viscosity were studied as the function of the HDPE composition, the crosslinking density and the shear intensity. The overall melt viscosities were appeared from 6×10³ to 9×10⁴poise over the shear rate of between 3.5se^(-1) and 350sec^(-1) from the capillary rheometer(L/D=40).

鷄林類事硏究 提要

陳泰夏 명지어문학회 1975 明知語文學 Vol.7 No.-

대형 이식 고사목의 고산목 처리에 관하여

하태주,이진희 한국식물인간환경학회 2000 인간식물환경학회지 Vol.3 No.2

The purpose of this study lies in treating with dead trees effectiely and reducing the cost in planting and utilizing dead trees as landscape material by transforming trasplant dead trees into dummy alpine trees. The alpine tree is the part which survives very long years of troubled weather and can be seen as an artistic work. When making the shape of an alpine tree, the height of a dead tree determines the length of a branch; the lover parts of it are longer, upper parts becoming shorter. The appropriate length of dead branches or weak branches is 1m in highlands and infertile lands; the thick branches should be scratched a lot in the area of boundary between trunk and branch, the living branches should be induced to form callus by treating paste. The problem of reduction in beauty caused by pruning scar could be solved by making large branches of alpine trees. The trasformation of dead trees, dead branches and nnecessary branches into dummy alpine trees is believed to be a great contribution to enhancing the dignity of a tree.

KAIST 인사평정시스템 : 특징, 문제점 및 개선방안

하태권,조경호,진재구 서울産業大學校 2005 논문집 Vol.54 No.4

This study aims to analyze characteristics, problems and solutions of performance appraisal system of the Korea Advanced Institute of Science and Technology (KAIST). Regulations and statistical data of KAIST performance appraisal system of employees except faculty members are analyzed, and all the target group members are surveyed. Some of them are selected for in-depth interview. Major problems found in this study are as follows: lack . of connection between performance appraisal system and organizational strategic development plans including overall human resource management system, lack of operational definition of evaluation factors and criteria, confusion in contents among evaluation factors, irrational weight distribution among evaluation factors, individual-focused performance appraisal where cooperative team efforts are neglected, subjective evaluation, and prohibition of disclosing results of appraisal to the rates. These problems are identified to be a main cause for a high level of dissatisfaction of employees with performance appraisal system. Based on the above-mentioned problems, a variety of recommendations are suggested to improve the KAIST performance appraisal system.

광촉매 TiO₂의 구조가 TCE 광분해에 미치는 영향

하진욱,김태룡 순천향대학교 부설 산업기술연구소 1999 순천향 산업기술연구소논문집 Vol.5 No.2

The photocatalytic degradation of trichloroethylene(TCE) in water on various type of TiO₂was studied. Surface properties of Ti0₂were characterized by XRD, SEM, and BET in our previous work23). TiO₂from Aldrich has 100% pure anatase, TiO₂from KIER has 100% pure rutile structure, and P25-TiO₂from Degussa has mixed structure of anatase(75 %) and rutile(25 %). Firstly, optimum conditions for TCE degradation were examined. Results showed that optimum loading amount of catalyst was 0.1 wt% and recirculation flow rate of mixture(distilled water and TCE) was 200cc/min. Secondly, the effect of TiO₂structure on TCE degradation was examined. Results revealed that anatase structure generally has better photocatalytic activity than rutile structure. And mixed structure(Degussa TiO₂) has better activity than those of pure anatase and rutile structure due to small particle size and large surface area.

성공적 EUC 영향요인 연구를 위한 구조방정식 모델 구축

하갑진,박태종 慶南大學校 産業經營硏究所 1995 産業經營 Vol.18 No.-

락탐화합물의 고리 확장 연구 : 입체 선택성과 Mechanism에 관한 연구 Study of Stereoselectivity and Mechanism

하진렬,최경민,김지아,원태진,신동수,이민주,안철진 昌原大學校 基礎科學硏究所 2002 基礎科學硏究所論文集 Vol.14 No.-

The ring expansion chemistry is one of the most important methods to prepare five-and six-membered heterocylic compounds. We have studied about γ-lactam ring expansion with stereoselectivity from β-lactam derivative. To do this chemistry, proton of N-benzyl group in β-lactam derivatives is eliminated by LDA and make carbanion.This anion make unstable 4-membered lactam intermediate, and then the ring is opened by homo clevage or hetero cleavage for releasing ring strain, followed by recyclization to one carbon to make γ-lactam ring with stereoselectivity in β-, γ- positions.

분말사출성형을 통해 제조된 17-4 PH STS의 인장특성에 미치는 초기 충진율과 열린 기공의 영향

하태권,성환진 국립7개대학공동논문집간행위원회 2005 공업기술연구 Vol.5 No.-

Powder injection molding (PIM) makes use of the shaping advantage of injection molding and is applicable to metals and ceramics. PIM delivers structural materials in a shaping technology, previously restricted to polymers. In this study, the 17-4 PH stainless steel powders with average diameters of 6-14 μm were injection-molded into flat tensile specimens. Sintering of the compacts was carried out at the various temperatures ranging from 1350oC for Ih. In the case of the compacts made with 10-μm powder, sintering temperature was taken from 200-1350oC to investigate the effect of relative density on the tensile properties.