지혈제 오염이 콤포머의 전단결합강도에 미치는 영향

허정무,곽주석,이황,이수종,임미경 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.2

One of this latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent® (Ultradent product Inc., Utah, U.S.A.). Group 3: Dentin surface was not etched but was contaminated by Bosmin®(Jeil Pharm, Korea).). Group 4: Dentin surface was not etched but was contaminated by Epri-dent®(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin surface was etched had contaminated by Astringedent®. Group 7: Dentin surface was etched and contaminated by Bosmin®. Group 8: Dentin surface was etched and contaminated by Epri-dent®. Group 9: Dentin surface was contaminated by Astringedent®. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin®. The contaminated surface was rinsed by water and dried by compressed air. Group 11: Dentin surface was contaminated by Epri-dent®. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning. F2000® was applicated on the conditoned dentin surface. The teeth thermocycled in distilled water at 5℃ and 55℃ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface paralled to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed of 1.0mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

비정형 자료의 정량화를 위한 정보계측 기법의 개발

정남수,이정재,김한중,허유만 한국농업정보과학회 2003 농업정보과학 Vol.4 No.1

Statistical total information was suggested by modifying Gell-Mann's total information in the process of dividing by bit number of composing elements. Results of application satisfied set condition of information suggested by Gell-Mann, converged in the case that all elements are known, and expressed the differences with deterministic information. To find the relation with real value, total information gathered in Encyclopedia regressed with land value and showed significant relation. Further research on automatic gathering information in more stable IGUS like internet would benefit assessing ambiguous value like environment and human feeling.

고포도당이 백서 사구체 메산지움 배양세포에서 p38 MAPK 활성화 및 Fibronectin 생성에 미치는 영향

유태현 ( Yu Tae Hyeon ),허종호 ( Heo Jong Ho ),류동열 ( Lyu Dong Yeol ),김현욱 ( Kim Hyeon Ug ),이수현 ( Lee Su Hyeon ),김진주 ( Kim Jin Ju ),정동섭 ( Jeong Dong Seob ),최규헌 ( Choe Gyu Heon ),이호영 ( Lee Ho Yeong ),한대석 ( Han 대한신장학회 2003 Kidney Research and Clinical Practice Vol.22 No.5

목 적 : 고포도당으로 자극한 백서 메산지움 배양세포에서 p38 mitogen activated protein kinase (MAPK)의 활성화와 p38 MAPK의 상부와 하부인자로 알려져 있는 MAPK kinase 3/6 (MKK3/6)와 c-AMP responsive element binding protein (CREB)의 활성화, 그리고 fibronectin 합성을 자극 시간에 따라 관찰하고, p38 MAPK 경로와 fibronectin 합성 사이의 연관성을 규명함으로서 당뇨병성 신증의 병태생리를 규명하고자 하였다. 방 법 : 백서 메산지움 배양세포를 정상 포도당 (5.6 mM), 고포도당 (30 mM), 또는 정상 포도당+만니톨 (24.4 mM)로 자극한 후 첫째 p38 MAPK; 둘째 p38 MAPK의 상부 인자인 MKK3/6; 셋째 p38 MAPK의 하부인자인 CREB; 넷째 MAPK phosphatase-1 (MKP-1)의 변화를 자극 시간 (3분-48시간)에 따라 Western blot을 이용하여 관찰하였으며, 다섯째 fibronectin의 변화는 RT-PCR과 ELISA를 이용하여 확인하였다. 결 과 : 고포도당으로 자극한 백서 사구체 메산지움 배양세포에서 p38 MAPK 경로가 활성화 되었다. Total p38 MAPK 단백은 변화가 없었으나, 활성화된 phospho-p38 MAPK 단백은 고포도당군에서 자극 10분 후부터 정상 포도당군에 비해 의의있게 증가되었으며 (평균 1.9배), phospho-CREB 단백 역시 고포도당군에서 자극 10분 후부터 의미있게 증가되었다 (평균 2.5배). 이에 비해 p38 MAPK의 상부인자인 phospho-MKK3/6는 고포도당군에서 자극 3분 후부터 의의있게 증가되었다 (평균 2.4배). 또한, MKP-1 단백 발현은 고포도당군에서 p38 MAPK의 활성이 증가하기 시작한 시기와 동일한 시기 (자극 10분 후)부터 증가하기 시작하였다 (평균 1.9배). Fibronectin mRNA와 세포 배양액내 fibronectin은 고포도당군에서 자극 48시간 후에 각각 1.7배와 1.5배 증가되었으며, 이러한 증가는 p38 MAPK 억제제인 SB203580 (1 μM)에 의해 각각 73%와 69% 억제되었다. 결 론 : 고포도당으로 자극한 백서 사구체 메산지움 배양세포에서 p38 MAPK 경로의 활성화를 확인하였으며, p38 MAPK 억제제가 고포도당에 의한 fibronectin의 합성 증가를 억제시키는 것으로 보아 당뇨병성 신증에서 관찰되어지는 fibronectin의 축적에 p38 MAPK 경로가 관여할 것으로 생각된다. Background : The p38 mitogen-activated protein kinase (MAPK) pathway is activated by several stress factors, potentially leading to cellular apoptosis and growth. Little is known about the pattern of p38 MAPK pathway activation in mesangial cells under high glucose conditions. We examined the activity and expression of p38 MAPK members, 1x78 MAPK, MAPK kinase 3/6 (MKK3/6), c-AMP responsive element binding protein (CREE), and MAPK phosphatase-l (MKP-1) in cultured rnesangial cells exposed to high glucose. Methods : Mesangial cells were subcultured from rat glomeruli isolated by sieving technique. After serum restriction for 48 hours rnesangial cells were exposed to 5.6 mM glucose (low glucose, LG), 5.6 mM glucose+24.4 mM mannitol (LG+M), or 30 mM glucose (high glucose, HG) for 3 minutes to 48 hours with or without SU203580. Western blot was performed to determine the activity and protein expression of p38 MAPK members. R`I-I`CR and ELISA were performed for fibronectin mRNA expression and fibronectin synthesis, respectively. Results : p38 MAPK and CREB activities were significantly increased in rnesangial cells exposed to FIG compared with LG or LG+M after 10 minutes and was sustained at higher levels to 48 hours (p<0.05), but total p38 MAPK and CREB protein expressions did not differ. MKP--1 showed a similar pattern as p 3 MAPK and CREE (p<O.O.i). MKK3/6 acitvity was significantly higher in HG cells after 3 minutes and remained at higher levels throught the study period (p<0.05). Fibronectin mRNA expression and fibronectin synthesis were significantly increased in mesangial cells exposed to HG after 48 hours (p<0.05). SB203580 (1 pM) pretreatment for 1 hour significantly reduced HG-induced fibronectin mRNA expression and fibronectin synthesis by 73% and 69%, respectively (p<0.05). Conclusion : p38 MAPK activity was increased in mesangial cells exposed to HG in parallel with increased MKK3/6 activity, resulting in CREB activation and increased fibronectin synthesis. This activated p38 MAPK may play a role in the pathogenesis of diabetic nephropathy.

Enhanced Corrosion Resistance of Alumina Scale Grown on Haynes 214 Alloy for Aggressive Gas Corrosion Environemnts

Su Jeong Heo,Sang-Kwon Lee,Jae Soo Ryu 한국방사성폐기물학회 2023 한국방사성폐기물학회 학술논문요약집 Vol.21 No.2

Pyroprocessing is a crucial method for recovering nuclear fuel materials, particularly uranium and transuranic elements (TRU), through electrochemical reactions in a LiCl or LiCl-KCl molten salt system, which is highly stable medium at elevated temperatures. In the electrochemical reduction stage, actinide metal oxides are effectively transformed into their metallic forms and retained at the cathode within a molten LiCl-Li2O environment at 650°C. Simultaneously, oxygen ions (O2-) are generated at the cathode and then transported through the molten salt to be discharged at the anode, where they combine to form oxygen gas (O2) on the anode’s surface. One notable challenge in this electrochemical process is the generation of various byproducts during the anode oxide reduction step, including oxygen, chlorine, carbon dioxide, and carbon monoxide. Consequently, significant amounts of corrosion products tend to accumulate on the upper region of the anode’s immersion area over time. This report introduces a novel solution to mitigate corrosion-related challenges within the specified temperature range. We propose a selective oxidation treatment for the NiCrAl-based 214 Haynes alloy, involving exposure to 1,100°C in a reducing atmosphere. The objective is to stimulate the growth of protective α-Al2O3 scales on the alloy’s surface. The resulting oxide scales have undergone thorough characterization using SEM, EDS, and XRD techniques. The pre-grown alumina scale has demonstrated commendable adherence and thermal stability, even when subjected to a chlorine-oxygen mixed atmosphere at the specified temperature.

Inhibition of Cellular Proliferation by p53 dependent Apoptosis and G2M Cell Cycle Arrest of Saussurea lappa CLARKE in AGS Gastric Cancer Cell Lines

Jeong Han Su,Kim Dong Jo,Heo Geum Jeong,Nam Chang Gyu,Go Seong Gyu The Physiological Society of Korean Medicine and T 2004 동의생리병리학회지 Vol.18 No.4

The root of Saussurea lappa includes sesquiterpene lactones such as costunolide and dehydrocostus lactone, and has been shown to be anti-tumorigenic with being used in traditional medicinal therapy in the Eastern Asia. However, the molecular basis of the effects of Saussurea lappa on fate of gastric carcinoma, which incur very frequently in the area, has not been well identified. In this study, the cytostatic effects of Saussurea lappa were examined using gastric AGS cancer cells. Cell viability was dramatically reduced by Saussurea lappa, in a dose-dependent manner. As time passed after its treatment, apoptotic population was increased and clearly showed G2-arrest. Being consistent, its treatment resulted in maintaining of G1 and S-phase cyclins D1, E, and A even until a significant apoptotic population was observed, for example, at 24h after treatment. However, G2/M phase cyclin B1 was reduced even at 12 h after treatment. In addition, its treatment increased expression of p53, p21/sup Wafl / cyclin dependent kinase inhibitor (CKI), and Bax, resulted in cleavages of procaspase 3 and poly ADP-ribose polymerase(PARP), indicating that such G2 arrest- and apoptosis-related molecules are involved. Therefore, these suggest that extracts of Saussurea lappa root may be a safer and effective reagent to deal with gastric cancers either by traditional herbal therapy or combinational therapy with conventional chemotherapy.

가시오가피 잎ㆍ뿌리ㆍ줄기ㆍ열매 추출물의 이화학적 특성 및 항산화 효과

Su-Jin Heo(허수진),Hee-Young Ahn(안희영),Min-Jeong Kang(강민정),Jae-Hong Lee(이재홍),Jae-Young Cha(차재영),Young-Su Cho(조영수) 한국생명과학회 2011 생명과학회지 Vol.21 No.7

가시오가피 잎, 뿌리, 줄기 및 열매의 수용성, 에탄올 및 메탄올 추출물의 생리활성 물질 분석과 항산화 활성 (DPPH free radical scavenging 활성, Cu/Fe-환원력, 간 조직 microsome 생체막 및 linoleic acid 과산화지질, Tyrosinase 저해활성)을 측정 하였다. 가시오가피 잎의 열수 추출물에서 추출 수율 16.04%, 폴리페놀 화합물 함량 2.67% 및 플라보노이드 함량 1.43%로 가장 높았다. 가시오가피 잎, 뿌리, 줄기 및 열매의 주요 미네랄은 K, Ca 및 Mg 이었다. DPPH free radical scavenging 활성, Cu/Fe-환원력, 간 조직 microsome 생체막 및 linoleic acid의 과산화 지질 측정에 의한 항산화 활성은 가시오가피 잎, 뿌리, 줄기 및 열매 모두에서 나타났으며, 시료 처리 농도 의존적으로 활성이 증가되는 것으로 나타났다. 이상의 실험 결과에서 가시오가피 잎, 뿌리, 줄기 및 열매 모두에서 높은 항산화 활성이 있었으며, 이는 폴리페놀 화합물과 플라보노이드와 같은 생리활성 성분을 많이 함유하고 있는 것과 깊은 관련성이 있는 것으로 향후 건강기능식품이나 기능성화장품의 천연 항산화제 소재 개발 관련 연구의 기초자료로 활용될 수 있을 것으로 사료되어 진다. The contents of bioactive and antioxidative activities (DPPH (α,α’-diphenyl-β-picrylhydrazyl), free radical scavenging activity, peroxidation of linoleic acid and rat hepatocyte microsome, and Fe/Cu reducing power, tyrosinase inhibition activity) were tested by in vitro experimental models using water, hot water, ethanol and methanol extracts of leaves (ASL), roots (ASR), stems (ASS) and fruits (ASF) from Acanthopanax senticosus. Hot water extract from ASL showed the highest extraction yield (16.04%) as well as highest contents of phenolic compounds (2.67%) and flavonoids (1.43%). Major minerals were K, Ca and Mg. In oxidation in vitro models using DPPH free radical scavenging activity, Fe/Cu reducing power, Fe²?/ascorbate-induced linoleic acid peroxidation by ferric thiocyanate and thiobarbituric acid (TBA) methods, tyrosinase inhibition activity and autooxidation of rat hepatic microsomes membrane, and antioxidative activities were strong in Acanthopanax senticosus. From these results, ASL extracts were shown to have the most potent antioxidative properties and contain the highest amounts of antioxidative compounds such as phenolic compounds and flavonoids. These results may provide the basic data to understand the biological activities of bio-active materials derived from leaves of Acanthopanax senticosus.

Cognitive Impairment in High-fat Diet-induced Mice

Jeong Su Ha,Seon Kyeong Park,Jin Young Kang,Du Sang Lee,Jong Min Kim,Sang Hyun Park,Bong Seok Kwon,Chang Jun Lee,Jeong Eun Kang,Su Bin Park,Ho Jin Heo 한국식품영양과학회 2016 한국식품영양과학회 학술대회발표집 Vol.2016 No.10

Hepatoprotective Effect of Cordycepin-increased Cordyceps militaris Extract Against Orotic Acid-Induced Fatty Liver in Rats

Su-Jin HEO,Hee-Young AHN,Min-Jeong KANG,Jae-Hong LEE,Sung-Su PARK,Young-Su CHO 한국생물공학회 2011 한국생물공학회 학술대회 Vol.2011 No.4

Leaching Behavior of Stabilized SIMFUEL and UO2 Pellets in Water

Su Jeong Heo,Ju Ho Lee,Jae-Won Lee,Seok-Min Hong,Yung-Zun Cho 한국방사성폐기물학회 2023 한국방사성폐기물학회 학술논문요약집 Vol.21 No.1

The stabilization techniques are highly required for damaged nuclear fuel to strengthen safety in terms of transportation, storage, and disposal. This technique includes recovering fuel materials from spent fuel, fabrication of stabilized pellets, and fabrication of fuel rods. Thus, it is important to identify the leaching behavior of the stabilized pellets to verify their stability in humid environments which are similar to storage conditions. In this study, we introduce various leaching experiment methods to evaluate the leaching behavior of the stabilized pellets, and determine the most suitable leaching test methods for the pellets. Also, we establish the leaching test conditions with various factors that can affect the dissolution and leaching behavior of the stabilized pellets. Accordingly, we prepare the simulated high- (55 GWd/tU) and low- (35 GWd/tU) burnup nuclear fuel (SIMFUEL) and pure UO2 pellets sintered at 1,550°C and 1,700°C, respectively. Each pellet is placed in a vessel and filled with DI water and perform the leaching test at three different temperature to verify the leaching mechanism at different temperature range. Based on the standard leaching test method (ASTM C1308-21), the test solution is removed from the pellet after specific time intervals and replaced in the fresh water, and the vessel is placed back into the controlled-temperature ovens. The test solutions are analyzed by using ICP-MS.

UO2 and SIMFUEL Pellets Fabrication and Leaching Behavior Study for Stabilization Technology of Damaged Used Fuel

Su Jeong Heo,Ju Ho Lee,Jae-Won Lee,Yung-Zun Cho 한국방사성폐기물학회 2022 한국방사성폐기물학회 학술논문요약집 Vol.20 No.2

Irradiated uranium dioxide in damaged used fuel could oxidize during transportation, interim storage or disposal, resulting that the fuel pellet fragments are reduced to a grain-sized powder that can easily escaped from the damaged rod. It has been reported that oxidized spent fuel (i.e. U4O9+x) that was in contact with water could increase the dissolution rate by making the grain boundaries more accessible to the water. Therefore, the damaged used fuel requires stabilization technology including nuclear material recovery, pellet manufacturing process, and stabilization fuel rod manufacturing that can secure safety in terms of permanent disposal. In this study, we prepared pure UO2 and SIMFUEL pellets that are a mixture of UO2 and surrogated metallic oxides for fission products equivalent to a burn-up of 35 GWd/tU and 55 GWd/tU as the stabilized spent fuel. The UO2 and fission products powders were milled and pressed into pellets at 250 MPa and sintered at 1,550°C and 1,700°C for 6 hours in an atmosphere of 4%H2-Ar. The prepared UO2 and SIMFUEL pellets were placed in PTFE Teflon vessels and filled with deionized water to identify the leaching behavior by a long-term leaching experiment under the similar condition to a repository for the safe disposal.