http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탄소섬유보강판의 홈삽입에 따른 철근콘크리트 보의 보강효과
한상훈,최만용,조홍동,박중열,황선일 충북대학교 건설기술연구소 2002 建設技術論文集 Vol.21 No.1
This paper presents a feasibility study of an alternative strengthening method by slot-bonded CFRP plates for reinforced concrete beam. A total 14 reinforced concrete beam were constructed, tested and the response of the beams in terms of deflection, strains, failure load and failure mode were examined. Each specimen was initially loaded for 75% of ultimate load, cracked specimen were strengthened with CFRP plate and then tested until complete failure. Test variables included the strengthening method, steel ratio and strengthening length, and the effects according to each test variables are analysed. The experimental results show that proposed methods can increase the flexural strength and stiffness of the beam significantly. Also, the failure of the specimens strengthened by the proposed method are more ductile than externally bonded specimen.
한상훈,최만용,조홍동,박중열,황선일 충북대학교 건설기술연구소 2002 建設技術論文集 Vol.21 No.1
A failure mode in the beam strengthened with a high modulus plate appears as a interface debonding failure or ripping-off failure. This failure mode means that plate is separated from adhesive or concrete before displaying its own ability. Therefore, as a method for controlling a premature failure, it is need to use a general anchorage implement. We conducted bending tests for reinforced concrete beams strengthened with CFRP. The experimental variables were a concrete strength, reinforcement ratio, cover thickness of concrete and length ratio of CFRP for a pure span. A failure load, failure mode, load-deflection curve and strain response at different distances from a cut-off of CFRP and strain distribution curve were measured to determine the bond development length. Also, the bond development length was compared with Nguyen’s model and British Standard specification.
한상훈,조홍동,박중열,황선일,김형진 충북대학교 건설기술연구소 2002 建設技術論文集 Vol.21 No.2
Externally bonding technique of CFRP(Carbon Fiber Reinforced Polymer Plate) is widely used in strengthening of concrete structures, and the improving effect of flexural strength and stiffness has been proven by early researchers. But, strengthened concrete structures present brittle failure mode accompanied with debonding of CFRP. That is, it means that the behavior of concrete structures strengthened with CFRP is mainly dependent on mechanical characteristics of CFRP and concrete interface. Therefore, double-lap shear test was performed to examine the bond characteristics on interface. The experimental variables are included with the strength of concrete, bond length and width. Test results showed that effective bond length of CFRP is approximately 30cm and maximum interfacial shear stress at specimen failure is 47 kgf/㎠.
한상훈,조홍동,박중열,황선일 충북대학교 건설기술연구소 2002 建設技術論文集 Vol.21 No.2
This paper describes the application of genetic algorithm for the optimum design of reinforced concrete beam. The cost of reinforced concrete beam as an objective function which includes the costs of concrete, formwork, tensile steel reinforcement and shear reinforcement is minimized. The flexural and shear strength, deflection, upper-lower bounds on steel reinforcement and beam width-depth ratio are considered as the constraints. For the check of the serviceability, deflection is calculated under the service loading by the effective moment of inertia instead of the gross moment of inertia. Optimum results obtained from GA are compared to verify the validity of GA with other literature. Then, GA is applied to 3 span RC beam based on standard specifications.
근골격계 질환 예방을 위한 재생타이어 트레드 버핑머신 개발
김재열,한재호,이연신,김항우,오성민 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-
As a part of environmental pollution prevention and resources recycling, the regeneration of waste tire has been largely contributed to national industry. But, the worker has been evaded this regeneration process by reason of the best mischievous process condition among 3D industries.So, the first, the process condition of regeneratingwaste tire was analyzed. The second, the equipment or system was developed for the improvement of working strength and environment. The last, researchers intend to solve these problems
홍경한,전상신,이승재,박찬수,권일욱,김재열,김병철,하옥남 한국공작기계학회 2004 한국생산제조학회지 Vol.13 No.4
Fin-tube type(Fin-type) heat exchanger has been tested in order to replace the heat exchanger of parallel flow type(P.F-type) which is now widly used in automobile air conditioning system. The following conclusions are drawn by the comparison of the characteristics of the heat exchangers. Evaporator and condenser capacities and COP(Coefficience of performance) were varied as with the compressor speed, outdoor air temperature and air flow rate changed, which much influenced on the characteristics of the air conditioning system. Evaporator and condenser capacities were increased with increasing compressor speed and outdoor air temperature. Evaporator and condenser pressures of Fin- type were decreased by 7% and 5% respectively compared with those of P.F-type. The COP of Fin-type was decreased with increasing outdoor air temperature and compressor speed. The COP of P.F-type was decreased by 14% compared with that of Fin-type.
근골격계 질환 예방을 위한 재생타이어 트레드 버핑작업 개선에 관한 연구
김재열,한재호,이연신,김항우,오성민,송경석 한국공작기계학회 2004 한국공작기계학회 춘계학술대회논문집 Vol.2004 No.-
As a part of environmental pollution prevention and resources recycling, the regeneration of waste tire has been largely contributed to national industry. But, the worker has been evaded this regeneration process by reason of the best mischievous process condition among 3D industries.So, the first, the process condition of regeneratingwaste tire was analyzed. The second, the equipment or system was developed for the improvement of working strength and environment. The last, researchers intend to solve these problems
세탁기용 자동변속기(Auto-Transmission)의 이상음 검사용 자동화 프로그램 개발
김재열,김양중,한재호,마상동,김창현 朝鮮大學校 機械技術硏究所 2000 機械技術硏究 Vol.3 No.1
This study includes automatic program for noise inspection of auto-transmission for washing machine one of modern home necessary. We effort to find and certificate sound noise source by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. Still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC for data acquisition. 2) DSO for noise acquisition. 3) S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W are to be decision fitness or the badness comparison S/W. Finally, we will making noise monitoring system and automatic program for inspection system
남성열,유석인,박완근,한상섭 강원대학교 삼림과학연구소 2000 Journal of Forest Science Vol.16 No.-
본 연구는 오대산 국립공원내 월정사지역에 분포하고 있는 전나무림의 식생구조를 분석하여 이 지역 전나무림의 관리에 대한 기초자료를 제공하기 위하여 수행되었다. 그 결과 전나무림의 층위구조는 교목층(2종류), 아교목층(20종류), 관목층(46종류) 그리고 초본층(87종류)으로 구성되어 있었다. 조사지역에 출현한 전체식물의 중요치는 전나무가 34.09%로 가장 높게 나타났고, 당단풍(23.07%), 청시닥나무(14.44%), 고광나무(10.72%), 오리방풀(8.49%), 복자기(7.80%), 고추나무(7.65%), 산거울(6.79%), 방아풀(5.76%), 고로쇠나무(5.47%), 개다래(5.41%)의 순으로 나타났다. 특히, 전나무의 치수가 전혀 없어 앞으로 아교목층과 관목층을 형성하고 있는 단풍나무류, 참나무류, 피나무류 등의 경쟁에 의하여 천이가 있을 것으로 사료된다. The vegetation structure of Abies holophylla forest was analyzed to provide the information for conservation of Abies holophylla at Wol-jong Temple in Mt. Odae national park, southern Korea. The layer structure of Abiesholophylla forest was consists of tree layer(2 species), subtree layer(20 species), shrub layer(46 species) and herb layer(87 species). The importance value of Abies holophylla was the highest one 34.09% , and those of Acer pseudo-siebodianum, Acer barbinerve, Philadelphus schrenckii, Isodon excisus, Acer triflorum, Staphylea bumalda, Carex humilis, Isodon japonicus, Acer monp and Actinidia polygama were 23.07%, 14.44%, 10.72%, 8.49%, 7.80%, 7.65%, 6.79%, 5.76%, 5.47% and 5.41%, respectivery. Especially, when predicting succession in Abies holophylla forest, such seedlings were not formed and succession was governed by competition of Acer species, Quercus species and Tilia species of subtree and shrub layer. Key words : Abies holophylla forest, importance value, Wol-jong Temple