http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PRC연속보 최적설계에서 단면의 유효깊이 변화를 고려한 DCOC알고리즘 개발
조홍동,한상훈 한국전산구조공학회 2002 한국전산구조공학회논문집 Vol.15 No.2
본 연구에서는 직사각형 단면을 갖는 프리스트레스 철근콘크리트보(PRC)의 최소경비설계를 수행하였다. 목적함수로서 건설경비는 콘크리트 경비, 긴장재 경비, 철근 경비 그리고 거푸집 경비를 포함하였으며 이를 최소화하였다. 설계제약조건으로는 시방서상의 최대처짐제약, 휨 및 전단강도제약, 연성제약 그리고 설계변수에 대한 상·하한 제약을 고려하였다. 쿤-터커 필요조건을 이용하여 최적성 규준을 설계변수의 항으로 명시적으로 유도하였으며, 이때 설계변수로는 보의 유효깊이, 긴장재의 최대편심거리 그리고 철근비로 취하였고, 긴장재의 형상은 2차 포물선함수로 가정하였다. 또한 본 연구에서는 요소별로 변화하는 단면을 갖는 경우와 전경간에 걸쳐 일정한 단면을 갖는 경우에 대하여 고려하였고, 긴장재의 경간별 최대편심을 설계변수화 하였다. 그리고 수치예를 들어 개발된 기법의 적용성과 효율성을 보였다. This paper describes the minimum cost design of prestressed reinforced concrete (PRC) hem with rectangular section. The cost of construction as objective function which includes the costs of concrete, prestressing steel, non prestressing steel, and formwork is minimized. The design constraints include limits on the minimum deflection, flexural and shear strengths, in addition to ductility requirements, and upper-Lower bounds on design variables as stipulated by the specification. The optimization is carried out using the methods based on discretized continuum-type optimality criteria(DCOC). Based on Kuhn-Tucker necessary conditions, the optimality criteria are explicitly derived in terms of the design variables - effective depth, eccentricity of prestressing steel and non prestressing steel ratio. The prestressing profile is prescribed by parabolic functions. In this paper the effective depth is considered to be freely-varying and one uniform for the entire multispan beam respectively. Also the maximum eccentricity of prestressing force is considered in every span. In order to show the applicability and efficiency of the derived algorithm, several numerical examples of PRC continuous beams are solved.
조홍동,한상훈 한국전산구조공학회 2000 한국전산구조공학회논문집 Vol.13 No.4
본 연구에서는 이산성 연속형 최적성규준방법(DCOC)을 이용하여 직사각형 단면을 갖는 철근콘크리트 연속보의 최적설계 알고리즘을 유도하였고, 최적설계 프로그램을 개발하였다. 목적함수로서 건설경비는 콘크리트 경비, 철근 경비 그리고 거푸집 경비를 포함하였으며 이를 최소화하였다. 설계제약조건으로는 시방서상의 최대처짐제약, 휨 및 전단강도제약, 연성제약 그리고 설계변수에 대한 상·하한 제약을 고려하였다. 쿤-터커 필요조건을 이용하여 최적성 규준을 설계변수의 항으로 명시적으로 유도하였으며, 이때 설계변수로는 보의 유효깊이와 철근비를 취하였다. 구조물 자중의 영향을 실제 시스템의 평형방정식에서 고려하였다. 설계변수들의 개선을 위한 반복과정과 컴퓨터 프로그램을 개발하였으며, 수치예를 들어 개발된 기법의 적용성과 효율성을 보였다. This paper describes the application of discretized continuum-type optimality criteria(DCOC) and the development of optimum design program for the reinforced concrete continuous beams with rectangular cross-section. The cost of construction as objective function which includes the costs of concrete, reinforcing steel and formwork is minimized. The design constraints include limits on the maximum deflection, flexural and shear strengths, in addition to ductility requirements, and upper and lower bounds on design variables as stipulated by the design Code. Based on Kuhn-Tucker necessary conditions, the optimality criteria are explicitly derived in terms of the design variables-effective depth, and steel ratio. The self-weight of the beam is included in the equilibrium equation of the real system. An iterative procedure and computer program for updating the design variables are developed. Two numerical examples of reinforced concrete continuous beams are presented to show the applicability and efficiency of the DCOC-based technique.
CFRP로 보강된 콘크리트 보의 온도 변화에 따른 영향 분석
조홍동,한상훈,이승수,신진환 한국안전학회 2003 한국안전학회지 Vol.18 No.2
In this study, the behavior characteristics of specimen strengthened with CFRP plate were analyzed according to the change of temperature. CFRP plate itself has a good resistance at the high temperature, but epoxy used as a adhesive is lost its bonding strength at the relatively low temperature. Therefore, this study carries out experiment on the beams slot-bonded with CFRP plates in order to maintain the successful bonding strength of epoxy at high temperature. It is presented that the range of glass transition temperature is 60~80℃ and RC beams slot-bonded with CFRP plate shows more increasing resistance and failure load than that of interface bonded at the high temperature.
GUI를 이용한 철근콘크리트 연속보의 최적설계프로그램 개발
조홍동,이상근,박중열,한상훈 한국전산구조공학회 2000 한국전산구조공학회논문집 Vol.13 No.1
본 논문에서는 철근콘크리트 연속보의 최적설계 문제를 다루었으며, 설계실무에서 사용하기 위한 GUI 시스템을 개발하였다. 최적설계 문제형성을 위해 목적함수로 콘크리트, 철근 그리고 거푸집의 경비함수로 취하였고, 설계변수는 보의 폭과 유효높이 그리고 철근비이다. 제약조건으로 강도, 사용성, 내구성 그리고 기하학적인 조건을 고려하였다. 이렇게 형성된 비선형 최적설계문제는 축차선형계획기법과 축차볼록계획기법을 사용하여 최적해를 구하였으며 그 효율성을 비교하였다. 또한 실제 설계실무에서 손쉽게 사용할 수 있도록 visual basic을 이용한 GUI 시스템을 개발하여 수치예를 통한 적용성을 보였다. In this paper, optimum design problem of R.C. continuous beam is considered and GUI system is developed for using at the practical design. Objective function lot formulation of optimum design problem is made up of the costs of concrete, reinforcing steel and formwork. Design variables are width, effective depth of the beam and steel ratio and design constraints are considered on the strength, serviceability, durability and geometrical conditions. The optimum design problem is solved by using sequential linear programming(SLP), sequential convex programming(SCP) and compared their effectiveness. Also this paper shows the application at practical design work according to the development of GUI system using visual basic.
조홍동(Hong-Dong Cho),오세욱(Se-Ouk Oh),윤일로(Il-Ro Yun),이봉직(Bong-Jik Lee) 한국토목섬유학회 2010 한국토목섬유학회 학술발표회 Vol.2010 No.4
본 논문은 글래스팔트를 이용하여 반복주행시험을 실시하였다. 시험변수는 보강유무와 글래스팔트 설치 위치이다. 시험 결과, 10㎜와 25㎜에 글래스팔트를 설치한 시험체는 무보강 시험체에 비해 동적안정도는 모두 증가하는 것으로 나타났으며, 포장층 25㎜에 글래스팔트를 위치시킨 경우가 보다 우수한 동적안정도를 나타냈으며, 총변형량이 각각 감소하는 것으로 나타났다. In this paper, using the Grid wheel tracking testwere made on the basis of the result. As a result, 10㎜ and 25㎜ installed in the Grid mubogang specimens compared to the dynamic stability of specimens, respectively showed increasing, 25㎜ case was placed on the Grid, showed a better dynamic stability, Total Displacement respectively, decreased.