http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Ruiping Zhi (검색결과 3 건)
- 무료
- 기관 내 무료
- 유료
-
Mathematical modeling of torque for single screw expanders
Yuting Wu,Ruiping Zhi,Wei Wang,Lili Shen,Yeqiang Zhang,Biao Lei,Jingfu Wang,Chongfang Ma 대한기계학회 2017 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.31 No.1
This paper presents a mathematical model of torque for Single screw expanders (SSEs). Instantaneous torque and torque ratio were analyzed and discussed. The periodic variation of instantaneous torque is the same for different inlet pressure levels. The torque ratio, with its value close to 1, is independent of the inlet pressure of SSE. An experimental system was established to measure the torque, power and shaft efficiency of the self-developed SSE prototype, and results were used to validate the model. Comparison shows that the difference between calculated and experimental torque values is small (6.58 N.m to 7.55 N.m). The calculated and experimental output power is similar, with a difference of 2.07 kW to 2.37 kW. Therefore, the proposed model can be used to estimate the torque and output power of SSEs.
-
Study on the internal irreversible losses and process exponent of single screw expanders
Lili Shen,Yuting Wu,Wei Wang,Biao Lei,Wei Duan,Ruiping Zhi 대한기계학회 2022 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.36 No.3
The irreversible losses including intake pressure, leakage, heat transfer, friction and over-expansion losses have great influence on the expander performance. In this paper, a thermodynamic model is presented to predict the real expansion process exponent and analyze the under-expansion or over-expansion under designed and off-designed operation conditions. The model verified by experimental results has a good agreement. Results showed that the real expansion process exponent of air is higher than the ideal adiabatic index of 1.4 and decreases from 1.716 to 1.644 with the internal volume ratio changing from 1.8 to 6.5. The real expansion process exponent of R123 is close to 1.00 under different internal volume ratio. Compared to the intake pressure, the variation of back pressure has greater influence on the large internal volume ratio than the small one. Thus, to adjust the back pressure is more effective to match the designed condition for the expander with a large internal volume ratio.
-
Yanan Li,Jingfu Wang,Yuting Wu,Biao Lei,Ruiping Zhi,Lili Shen 대한기계학회 2022 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.36 No.1
A thermodynamic model of a water-lubricated single-screw air compressor was established to examine the impact of water injection parameters on performance. Heat transfer and leakage between humid air and water was considered by analyzing the impacts of rotation speed, discharge pressure, the rate of water injection, and diameter of droplets on the performance of a compressor. The discharge temperature could be reduced by increasing the rate of water injection, resulting in the compression procedure moving towards an isothermal state. The increase in the rate of water injection under rated conditions from 60 L/min to 80 L/min resulted in a reduction in the compressor discharge temperature, increased the volume efficiency, and increased adiabatic efficiency by 11.1 K, 1.5 %, and 2.8 %, respectively. Water injection atomization increased the area of transfer of heat between humid air and water and improved the performance of compressor.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
