http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Cao, Chunyan,Xie, Along,Zhou, Tianliang,Zhong, Haichang,Lu, Xiangjun,Xie, An,Noh, Hyeon Mi,Jeong, Jung Hyun Elsevier 2020 Journal of luminescence Vol.217 No.-
<P><B>Abstract</B></P> <P>Some lutetium molybdenum oxides were synthesized through a solid-state reaction method. By adjusting the molar ratios of raw materials of Lu<SUB>2</SUB>O<SUB>3</SUB> (Eu<SUB>2</SUB>O<SUB>3</SUB>) to MoO<SUB>3</SUB>, Eu<SUP>3+</SUP> doped lutetium molybdenum oxides Lu<SUB>2</SUB>MoO<SUB>6</SUB>, Lu<SUB>2</SUB>Mo<SUB>2</SUB>O<SUB>9</SUB>, Lu<SUB>2</SUB>(MoO<SUB>4</SUB>)<SUB>3</SUB>, and Lu<SUB>6</SUB>MoO<SUB>12</SUB> were obtained. The materials were characterized by X-ray diffraction (XRD) patterns, scanning electron microscope (SEM) images, energy-dispersive spectra (EDS), diffuse reflection (DR) spectra, photoluminescence (PL) excitation and emission spectra, luminescence decay curves, and temperature dependent integrated emission spectra. Enhanced excitation and emission spectra were recorded at high temperatures. Possible energy transfer processes were proposed to explain the excitation and emission spectra. By combining some phosphors with near ultraviolet (NUV) chips, the obtained light emitting diodes (LEDs) gave red light under forward bias current. The results suggest that the obtained Eu<SUP>3+</SUP> doped lutetium molybdenum oxides have potential applications in phosphor converted based NUV LEDs.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Eu<SUP>3+</SUP> doped Lu<SUB>2</SUB>MoO<SUB>6</SUB>, Lu<SUB>2</SUB>Mo<SUB>2</SUB>O<SUB>9</SUB>, Lu<SUB>2</SUB>(MoO<SUB>4</SUB>)<SUB>3</SUB>, and Lu<SUB>6</SUB>MoO<SUB>12</SUB> were obtained. </LI> <LI> The materials present different structures, morphologies, optical properties, and luminescece decay behaviors. </LI> <LI> Eu<SUP>3+</SUP> concentration dependent optical properties in Lu<SUB>2</SUB>MoO<SUB>6</SUB> were researched. </LI> <LI> Enhanced excitation and emission spectra were recorded under high temperatures in some materials. </LI> <LI> Red LEDs were obtained by packaging phosphors to NUV LED chips. </LI> </UL> </P>
Lu’lu’ Purwaningrum,Satoshi Muraki 대한인간공학회 2014 대한인간공학회 학술대회논문집 Vol.2014 No.5
Objectives. Carrying and moving chairs enable and improve learning activities at school, which leads to better quality of education. At elementary schools in Indonesia and other developing countries, only one size of chair has been used for all ages and grades, therefore, making it heavy for younger children. The objective of the present study was to observe the motion of carrying and moving an elementary school chair by children. Methods. A total of 41 children consisting of 16 Indonesian and 25 Japanese children (17 boys and 24 girls) aged 6, 7, 8 and 9 participated in this study. We used three elementary school chairs (1 Indonesian and 2 Japanese chairs). The participants carried and moved the chairs 3 m with an ordinary speed, and were allowed to hold any part of the chair that was convenient for them. We recorded their motion when carrying and moving the chair. Results. The chair was carried at the side or in front of the child’s body, and the chair being in a lateral position is the most popular method of carrying and moving (75%). In all methods, participants showed a preference in using two particular chair parts to hold the chair. Conclusions. Careful consideration is needed on the design of elementary school chairs from the perspective of the main methods and holding pattern for carrying and moving them, especially heavy chairs that are used in elementary schools in Indonesia.
( Lu`lu` Purwaningrum ),( Satoshi Muraki ) 한국감성과학회 2014 춘계학술대회 Vol.2014 No.-
Objectives. Carrying and moving chairs enable and improve learning activities at school, which leads to better quality of education. At elementary schools in Indonesia and other developing countries, only one size of chair has been used for all ages and grades, therefore, making it heavy for younger children. The objective of the present study was to observe the motion of carrying and moving an elementary school chair by children. Methods. A total of 41 children consisting of 16 Indonesian and 25 Japanese children (17 boys and 24 girls) aged 6, 7, 8 and 9 participated in this study. We used three elementary school chairs (1 Indonesian and 2 Japanese chairs). The participants carried and moved the chairs 3 m with an ordinary speed, and were allowed to hold any part of the chair that was convenient for them. We recorded their motion when carrying and moving the chair. Results. The chair was carried at the side or in front of the child`s body, and the chair being in a lateral position is the most popular method of carrying and moving (75%).
Yuan Lu,Ji-Qiang Gao,Jian-feng Yang 한양대학교 세라믹연구소 2008 Journal of Ceramic Processing Research Vol.9 No.6
In this paper, porous Si3N4 ceramics were fabricated by carbothermal reduction between silicon dioxide and carbon [1]. The influences of α-Si3N4 seeds and sintering additives on the microstructure and mechanical properties of porous Si3N4 ceremics were investigated. XRD analysis proved the complete formation of a single-phase β-Si3N4. SEM analysis showed that the resultant porous Si3N4 ceramics had a fine microstructure and a uniform pore structure. The sintered sample with Lu2O3 as sintering additive showed finer, higher aspect ratio β-Si3N4 grains. The addition of Eu2O3 accelerated the densification of porous Si3N4 ceramics, decreased the porosity and increased the flexural strength. The addition of α-Si3N4 seeds accelerated the formation of the α-Si3N4 phase at a low temperature and the α-β phase transformation process at a high temperature. With an increase in the α-Si3N4 seeds content, the porosity decreased, and the flexural strength increased accordingly. In this paper, porous Si3N4 ceramics were fabricated by carbothermal reduction between silicon dioxide and carbon [1]. The influences of α-Si3N4 seeds and sintering additives on the microstructure and mechanical properties of porous Si3N4 ceremics were investigated. XRD analysis proved the complete formation of a single-phase β-Si3N4. SEM analysis showed that the resultant porous Si3N4 ceramics had a fine microstructure and a uniform pore structure. The sintered sample with Lu2O3 as sintering additive showed finer, higher aspect ratio β-Si3N4 grains. The addition of Eu2O3 accelerated the densification of porous Si3N4 ceramics, decreased the porosity and increased the flexural strength. The addition of α-Si3N4 seeds accelerated the formation of the α-Si3N4 phase at a low temperature and the α-β phase transformation process at a high temperature. With an increase in the α-Si3N4 seeds content, the porosity decreased, and the flexural strength increased accordingly.
The Influence of Cigarette Smoke on the Epithelium of the Vestibule: an Electron Microscopic Study
Mukaddes E?refo?lu,Erol Selimo?lu,Muammer E?refo?lu,?zgen Vuraler 연세대학교의과대학 2003 Yonsei medical journal Vol.44 No.4
It is known that cigarette smoke induces cytological alterations on the respiratory and olfactory mucosa of the nasal cavity. We evaluated whether cigarette smoking had adverse effects on the epithelium of the vestibule, in the absence of any published ultrasutructural studies. We evaluated ten patients suffering from septum deviation, eight of whom were long-term smokers. While each layer of the epithelium obtained from the non-smokers consisted of a homogeneous cell population, each from the long-term smokers consisted of a heterogeneous cell population. The most prominent changes occurred in the shape and size of the cells and nuclei, the number and length of the cytoplasmic projections, the number and distribution pattern of the desmosomes, and the width of the intercellular spaces. We concluded that cigarette smoke produces hyperplastic and dysplastic changes, important factors related with cancer development, on the epithelium of the vestibule.
Parametric analysis and torsion design charts for axially restrained RC beams
Luís F.A. Bernardo,Cátia S.B. Taborda,Jorge M.R. Gama 국제구조공학회 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.55 No.1
This article presents a theoretical parametric analysis on the ultimate torsional behaviour of axially restrained reinforced concrete (RC) beams. This analysis is performed by using a computing procedure based on a modification of the Variable Angle Truss Model. This computing procedure was previously developed to account for the influence of the longitudinal compressive stress state due to the axial restraint conditions provided by the connections of the beams to other structural members. The presented parametric study aims to check the influence of some important variable studies, namely: torsional reinforcement ratio, compressive concrete strength and axial restraint level. From the results of this parametric study, nonlinear regression analyses are performed and some design charts are proposed. Such charts allow to correct the resistance torque of RC beams (rectangular sections with small height to width ratios) to account for the favorable influence of the axial restraint.
Ultimate torsional behaviour of axially restrained RC beams
Luís F.A. Bernardo,Cátia S.B. Taborda,Jorge M.A. Andrade 사단법인 한국계산역학회 2015 Computers and Concrete, An International Journal Vol.16 No.1
This article presents a computing procedure developed to predict the torsional strength of axially restrained reinforced concrete beams. This computing procedure is based on a modification of the Variable Angle Truss Model to account for the influence of the longitudinal compressive stress state due to the axial restraint conditions provided by the connections of the beams to other structural elements. Theoretical predictions from the proposed model are compared with some experimental results available in the literature and also with some numerical results from a three-dimensional nonlinear finite element analysis. It is shown that the proposed computing procedure gives reliable predictions for the ultimate behaviour, namely the torsional strength, of axially restrained reinforced concrete beams under torsion.