RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        단계별 광중합 방식이 복합레진 수복물의 수축 응력과 변연 접합도에 미치는 영향

        박종휘,이난영,이상호 大韓小兒齒科學會 2006 大韓小兒齒科學會誌 Vol.33 No.2

        본 연구는 단계별 광중합 방법이 복합레진의 중합 및 수축 응력에 미치는 효과를 비교, 평가하고자 자연치를 대상으로 와동을 형성하고 할로겐 광중합기와 LED 광중합기의 통법에 의한 연속 조사 및 단계별 조사법으로 각각 복합레진을 중합시킨 후 수축 응력을 측정하고 주사전자현미경을 통해 수복물과 와동의 계면부에서 접착 상태를 관찰하여 다음과 같은 결과를 얻었다. 1. 모든 군에서 광중합 직후에는 일시적으로 팽창되었다가 초기에는 급격한 수축 응력의 증가를 보였고 시간이 경과될수록 수축 응력의 증가가 완만해지는 경향을 보였다(P<0.05). 2. 동일한 광조사 군내에서는 hybrid형인 Filtek Z-250™군보다는 flowable형인 Filtex flow™군이 더 적은 수축 응력을 보였다. 3. Filtek Z-250™군에서는 LED 단계별 조사군이 수축 응력이 가장 적게 나타났다.(P<0.05). 4. Filtek flow™군 역시 LED 단계별 조사군이 수축 응력이 가장 작게 나타났으나(P<005) Filtek Z-250군에서와 같이 다른 조사군에 비해 많은 차이를 보여주지는 못했다. 5. 주사전자현미경으로 관찰한 복합레진과 와동벽과의 접합 상태는 긴밀한 상태를 보였으나 LED 조사군에서 일부 틈이 관찰되었다. 이상의 결과를 종합해 보면 hybrid형 복합레진의 경우 단계별 중합방식을 사용할 경우 단일광도의 중합방식에 비해 수축응력을 감소시킬 수 있고 적절한 변연 적합상태를 유지시킴으로써 임상적으로 고광도 LED 광중합기의 경우 단계별 중합방식의 사용이 유리하다고 사료된다. The purpose of this study was to inverstigate the effect of step-curing mode on polymerization shrinkage and contraction of composite resion restoration. Class I cavities were prepared on the extracted human premolars. The cavities were filled with Filtek Z-250™(hybrid resin, 3M ESPE, USA) and Filtek flow™(flowable resin, 3M ESPE, USA) and cured with one of the following irradiation modes; Halogen 40sec with continuous curing, LED 10sec with continuous curing, and LED 13sec with step-curing. Contraction stress was measured with strain gauge which was connected to TML Datalogger™(TDS-102, SOKKI, Japan) and resion-dentin interfaces were observed by scanning electron microscope. The results of present study can be summarized as follows: 1. Composite resion restoration showed transient expansion just after irradiation of curing light. Contraction stress was increased rapidly at the early phase of polymerization and reduced slowly as time elapsed(P<0.05). 2. Filtek flow™ showed lower contraction stress than Filtek Z-250™ regardless of curing modes. 3. LED step-curing mode showed lowest contraction stress in Filtek Z-250™ compared with other curing modes(P<0.05). 4. LED step-curing mode showed lowest contraction stress in Filtek flow™ compared with other curing modes(P<0.05), but difference in contraction stress was not go greate as in Filtek Z-250™. 5. Polymerization of composite resion by LED light with step-curing mode and halogen light with continuous mode resulted in better marginal sealing than LED light with continuous mode.

      • KCI등재

        소아의 치면세균막에 존재하는 mutans streptococci의 분포

        국중기,박종휘,유소영,김화숙,이난영 大韓小兒齒科學會 2004 大韓小兒齒科學會誌 Vol.31 No.3

        한국인 소아의 치면세균막에 존재하는 mutans streptococci 종 및 생물형의 발현빈도와 치아우식경험지수와 상관관계를 알아보기 위하여. 조선대학교 치과병원에 내원한 12세 미만 113명의 소아 환자의 치아우식경험지수를 구하고, 이들의 상하악 유전치 및 유구치의 협면 및 설면의 치면세균막 샘플을 채취하여 mutans streptococci를 mitis-salivarius bacitracin 배지에서 선택적으로 분리하였다. 이들의 biotype을 알아보기 위해 생화학적 검사를 실하였고, 이들의 종 수준에서의 동정을 위해 dextranase 유전자를 표적으로 하는 중합효소연쇄반응을 시행하여 하였다. 113명의 환자 중에서 40명의 치면세균막에서 40 균주의 mutans streptococci이 검출되었다. 이들 중 생물형 제 Ⅰ형 (45%)이 가장 많이 검출되었으며, 그 다음으로 제Ⅳ형 (32.5%), 제 Ⅱ형 (15%). 제 Ⅴ형 (5%), 제 Ⅲ형 (2.5%) 순으로 검출되었다. 또한, 종 수준에서의 발현빈도를 알아본 결과 S. mutans가 69%, S. sobrinus는 31%였다. Mutans streptococci 종 또는 생물형에 따른 환자의 치아우식경험지수간의 차이는 없는 것으로 조사되었다(p>0.05). 이상의 결과를 종합할 때, 한국인의 소아의 구강 내에 존재하는 mutans streptococci중 생물형 제 Ⅰ형인 S. mutans가 가장 높은 빈도로 존재하며, 치아우식증이 세균학적 요소만이 아닌 기타 여러원인 요소에 의해 발병되는 다는 여러 연구 결과와 일치함을 알 수 있었다. The aim of this study is to survey the frequency of mutans streptococci species and biotypes isolated from dental plaque in Korean children and the relationship between species and biotypes of mutans streptococci and dft index. Dental plaques were collected from the anterior and molar teeth of upper and lower jaws in the subjects, aged below 12 years old. A dental examination was performed for dft (decayed, filed, total) with the WHO caries diagnostic criteria. The mutans streptococci from the sample were cultured selectively on mitis salivarius-bacitracine (MSB) agar plate. For biotyping of mutans streptococci, biochemical test was performed. From the culture, bacterial genomic DNA was prepared f3r using of PCR template for the identification of mutans streptococci at the species-level. Forty strains of mutans streptococci were isolated from dental plagues of 40 patients. The biotype Ⅰ (45%) and biotype Ⅳ (32.5%) were most frequently detected. The prevalence of s. mutans and S. sobrinus was 69% and 31%, respectively There was no positive relationship between species and biotypes of mutans streptococci and dft index. Our results revealed that biotype Ⅰ and S. mutans were frequently detected in Korean children and support that dental caries incidents by many causative factors not only bacterial factor.

      • KCI등재

        소아에서의 Nd : YAG Laser를 이용한 치은착색제거술 YAG Laser in children

        모경희,박헌동,박종휘,김효석,정현구,설재헌,이병채 조선대학교 구강생물학연구소 2003 口腔生物學硏究 Vol.27 No.1

        Melanin is normally found in the skin of all people, and normal pigmentation of the intraoral tissues is a relative frequent finding. Gingival hyperpigmentation may cause esthetic problems and embarrassment, especially in patients with a gummy smile. Melanin pigmentation is related to etiologic factor such as hormon, systemic factor, drug, smoking and gingival inflamation. Depigmentation procedure can be Performed by gingival epithelium removing procedure, gingivectomy, free gingival graft, laser therapy, dry ice, Vitamin C and phenol-alcohol method. We could obtain favorable esthetic results by procedures such as Nd: YAG laser. The Nd:YAG laser was set at 4 watt, 50mJ, 80 pulse per second. The procedures were performed with contact mode in all pigmented areas by using a handpiece with a 320㎛ diameter fiber optic. Ablation of the gingival hyperpigmented gingiva appeared healthy, pink, and firm. No recurrence of hyperpigmentation had been found in 6 months of follow-up.

      • KCI등재

        맹출성 복잡치아종 : 증례보고 A Case Report

        오유향,박종휘,박헌동,설재헌,이병채 조선대학교 구강생물학연구소 2003 口腔生物學硏究 Vol.27 No.1

        Odontomas, hamartomas of odontogenic origin, are composed of all the structures that make up teeth The WHO distinguishes odontoma into two types. The complex odontoma is defined as "a malformation in which all the dental tissues are represented. individual tissues being mainly well-formed but occurring in a more or less disorderly Pattern." The compound odomtoma is defined as "a malformation in which all the dental tissues are represented in a more orderly pattern than in the complex odontoma so that the lesion consists of many tooth-like structures. Most of these structures do not resemble morphologically the teeth of normal dentition, but in each one enamel, dentin, cementum and pulp are arranged as in the normal tooth." Although these tumora occur frequently and constitute 22% of all odontogenic tumors, reports on erupted odontomas are very rare. Erupted odontoma are defined as tumors that it occurs a calcified mass may be defected on the alveolar ridge. The final diagnosis should be confirmed by biopsy. The treatment of choice is complete surgical excision, similarly to intraosseous odontoma and it does nat tend to recur. The histopathological report confirmed the diagnosis of complex odontoma. This report presents a case of 8-year-old girl with the calcified mass within the operculum covered the central fossa of the mandibular left fkrst molar. And it was diagnosed as erupted complex odontoma by excisional biopsy.

      • KCI등재

        9세 소아에서 나타난 비구개낭의 치험례 : CASE REPORT

        이상호,모경희,박종휘,이난영,이창섭,윤정훈 大韓小兒齒科學會 2003 大韓小兒齒科學會誌 Vol.30 No.3

        비구개낭은 절치관낭이라고도 불리우며 가장 흔한 비치성낭이다. 발육성으로 비구개관내에서 태생 상피잔사가 증식하여 낭변성을 일으킴으로써 발생한다. 비구개낭은 악골낭의 약 1.7-11.9%를 차지하며 남자에게서 약 3배 정도 호발한다. 연령분포는 매우 광범위하나 대개 40대에서 60대 사이에서 발견되며 10세 이전에 발견되는 경우는 매우 드물다. 비구개낭을 위한 적절한 치료는 적출이며 비구개신경에 손상을 가하지 않도록 해야 한다. 낭이 커서 치아의 생활력에 영향을 주거나 비구강누공이나 구강 상악동 누공을 형성할 우려가 있을 경우에는 조대술로 치료할 수 있다. 본 증례의 환아는 구개부의 무통성 종창을 주소로 내원하여 임상 및 방사선 검사를 실시한 결과 소아에서 매우 드물게 나타나는 비구개낭으로 방사선사진에 32×25.5mm크기를 나타내었으며, 매우 팽창되어 순측 피질골판을 관통하고 상순소대 하방과 전정부위까지 종창되어 있었다. 병소와 인접한 상악 4전치 치근은 심하게 이개되어 있었다. 낭의 크기가 매우 커서 조대술을 시행하였으며 obturator를 장착하고 있으며 향후 계속 관찰이 요한다. Nasopalatine duct cyst(NPDC) is the most common non-odontogenic cyst in the oral area and is thought to be originated from the epithelial remnants of the nasopalatine duct. Many etiologic factors have been proposed for the NPDC; trauma to the region during mastication of from ill fitting dentures, bacterial infection, and spontanious proliferation of tissue. The majority of cases are seen between the ages of 40th and 60th and it is rare in children. Surgical enucleation is the recommended treatment for NPDC, usually under general anaesthesia. A 9-year-old boy was refered to the chosun university pedodontics clinic that this child who has anterior palatal swelling is in routine check. In this case, swelling was presented at the bottom of the anterior nasal cavity as well as in the labial aspect of the upper alveolar ridge. It was so large that we treated it by marsupialization and obturator was put. This patient is on the continuous observation. We treated the child who had NPDC by marsupialization, and got the successful results such as rapid bone regeneration and the consistency of incisor vitality.

      • KCI등재

        각종 치과레이저의 Streptococcus mutans에 대한 증식 기능억제 효과

        한강석,국중기,유소영,김화숙,박종휘,박현동,이상훈 大韓小兒齒科學會 2003 大韓小兒齒科學會誌 Vol.30 No.3

        레이저의 구강내 산 생성 세균인 S. mutans에 대한 증식 및 기능 억제효과를 평가하기 위하여 S. mutans KCTC 3065가 포함된 세균 pellet에 Er:YAG 레이저와 Nd:YAG 레이저를 비접촉식 방법으로, 조사세기 50mJ, 조사시간 5초, 그리고 pulse repetition rate를 각각 10Hz와 30Hz로 하여 조사하고 세균 군락수, 산 생성능, 불용성 세포외다당류의 합성량을 측정하여 다음과 같은 결과를 얻었다. 1. Chinese ink로 photosensitization을 시행한 후 Nd:YAG 레이저를 조사한 경우가 S. mutans의 증식을 가장 많이 억제하였으며 Er:YAG 레이저 조사도 증식을 억제하였다. Chinese ink를 사용하지 않고 ND:YAG 레이저를 단독으로 조사한 경우는 S. mutans의 증식을 억제하지 못하였다. 2. Chinese ink로 photosensitization을 시행한 후 Nd:YAG 레이저를 조사한 경우가 일정기간 동안 S. mutans의 산생성능을 가장 많이 억제하였으며 Er:YAG 레이저 조사도 산 생성능을 억제하였다. Chinese ink를 사용하지 않고 Nd:YAG 레이저를 단독으로 조사한 경우는 S. mutans의 산 생성능을 억제하지 못하였다. Er:YAG 레이저와 Chinese ink로 photosensitization을 시행한 후 Nd:YAG 레이저를 조사한 경우는 pulse repetition rate가 클수록 전반적으로 세균의 산생성능을 더 많이 억제하였다. 3. 레이저 조사는 S. mutans의 불용성 세포외다당류의 합성에 영향을 미치지 못하였다. 이상의 결과로 보아 Er:YAG 레이저와 Chinese ink로 photosensitization을 시행한 후의 Nd:YAG 레이저 조사는 일정시간 동안 S. mutans의 증식과 산 생성능을 억제시키므로써 치아우식증 예방효과를 얻을 수 있다고 사료되나 억제효과가 오래가지 않아 임상적으로 효과를 얻기 위해서는 자주 조사를 해주어야 한다는 문제점을 안고 있어 임상적으로 치아우식증 예방이란 단독 목적으로 사용하기에는 실용성이 크지 않다고 사료된다. This was performed to evaluate the inhibitory effect of laser on the growth of S. mutans. The bacterial pallets containing S. mutans KCTC 3065 were irradiated with Er:YAG laser and Nd:YAG laser by non-contact method at an intensity of 50mJ for 5 sec with the pulse repetition rates of 10Hz and 30Hz, respectively. The following results were obtained on colony count, acid producing ability, and the amount of insoluble extracellular polysaccharide synthesis. 1. The irradiation of Nd:YAG laser after photosensitization with Chinese ink inhibited the proliferation of S. mutans the most, and the irradiation of Er:YAG also inhibited the proliferation. However, the irradiation of Nd:YAG laser alone could not inhibited the proliferation of S. mutans. The pulse repetition rate did not affect significantly on the proliferation of bacteria in overall. 2. The irradiation of Nd:YAG laser after the photosensitization with Chinese ink inhibited the acid production of S. mutans the most for a certain period of time. Er:YAG laser also inhibited acid production. When Nd:YAG laser was used alone, the acid production of S. mutans was not been inhibited. The irradiation of Nd:YAG laser after photosensitization with Chinese ink inhibited the acid production ability of bacteria the most as the pulse repetition rate increased. 3. Laser irradiation did not inhibited the synthesis of insoluble extracellular polysaccharide of S. mutans. From these results, we conclude that the irradiatioin of Er:YAG laser and Nd:YAG laser after photosensitization with Chinese ink would inhibit the proliferation and acid production by S. mutans, which may prenent dental caries. However, this effect does not last long time so that the laser irradiation should be repeated frequently in order to obtain clinical effect; thus, this laser irradiation would not have a clinical usefulness in preventing dental caries when used solely.

      • KCI등재

        A Study on Copper/Silver Core–Shell Microparticles with Silver Nanoparticles Hybrid Paste and its Intense Pulsed Light Sintering Characteristics for High Oxidation Resistance

        Jong-Whi Park,Yong-Rae Jang,Hyoungsub Shin,Hak-Sung Kim,JayJ.Kim 한국정밀공학회 2021 International Journal of Precision Engineering and Vol.8 No.6

        In this study, a silver (Ag) coated copper (Cu) core–shell microparticles paste were fabricated and screen-printed on Polyimide (PI) substrates. It was sintered via intense pulsed light (IPL) sintering technique. IPL irradiation condition (i.e. pulse duration, irradiation energy) was optimized to obtain high conductivity and good oxidation resistance characteristics. To increase the packing density of the pastes and its oxidation resistance, Ag nanoparticles (Ag NPs) were added to Cu/Ag core–shell microparticles (core–shell MPs) paste with optimal mass ratio. To analyze the sintering and oxidation characteristics of hybrid pastes (Ag NPs + core–shell MPs), a scanning electron microscope (SEM) and a focused ion beam (FIB) was used. To demonstrate the mechanism of the sintering process on hybrid pastes, heat generation at the junctions between particles were simulated using Multiphysics COMSOL program. The packing density of the hybrid pastes was investigated using CATIA digital mock-up (DMU) program. In addition, to confirm the heat generation with respect to the packing density of the hybrid pastes, in-situ temperature monitoring process was conducted. As a result, hybrid paste pattern sintered with IPL showed excellent oxidation resistance (resistance increase rate in 300 °C for 5 h: 4.92%), and high electrical conductivity (6.54 μΩ cm).

      • 백색광 조사를 통해 환원된 산화 그래핀 기반의 저항 메모리에 관한 연구

        박종휘(Jong-Whi Park),Simon S. Park,김학성(Hak-Sung Kim) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.06

        본 연구에서는 산화 그래핀의 백색광 조사 공정을 통해 유연한 저항 메모리를 형성했습니다 [1-2]. 저항 메모리의 하부 전극은 유연한 투명 폴리이미드 기판에 구리를 증착 공정을 이용하여 형성하였습니다. GO 박막은 구리로 형성된 하부 전극 위에 증류수와 에탄올로 이루어진 산화 그래핀 용액의 스핀 코팅 방법을 통해 제작되었습니다. 산화 그래핀은 광 조사 조건 (즉, 펄스 지속 시간, 조사 에너지)의 최적화를 통해 스위칭 특성을 가지게 됩니다. 광 조사 공정을 진행한 그래핀 층에 알루미늄의 증착을 통해 상부 전극을 형성했습니다. 저항 메모리의 스위칭 동작 특성은 파라미터 분석기를 사용하여 측정되었습니다. 또한, 파라미터 분석기를 이용하여 제작된 저항성 메모리의 전기적 신뢰성 특성과 그에 따른 온/오프 비율을 평가했습니다. 그래핀 옥사이드층의 환원 정도는 X 선 광전자 분광법, 투과 전자 현미경을 사용하여 분석되었습니다. 따라서, 환원 그래핀 옥사이드/그래핀 옥사이드층 기반 저항 메모리는 WORM (Write Once Read Many Time) 특성과 (~ 10<sup>3</sup>) 온/오프 비율 및 (1000 스위칭 사이클) 내구성 특성과 같은 높은 전기적 특성을 보여주었습니다. In this study, an intense pulsed light (IPL) process for annealing graphene oxide (GO) insulator was conducted to form a flexible resistive random access memory (ReRAM) [1-2]. A bottom electrode in ReRAM structure was formed by deposition copper (Cu) on flexible, transparent polyimide (PI) substrate. The GO thin insulator layer was fabricated using spin coating method with distilled-water (D.I water) and ethanol-based solution on flexible bottom electrode. The irradiation conditions (i.e. pulse duration, irradiation energy) was optimized to obtain switching characteristics. A top electrode was formed by deposition aluminum (Al) on insulator layer. The switching operation characteristics of the ReRAM was measured using parameter analyzer. The endurance characteristics and on/off ration were evaluated. The switching mechanism of reduction degree of GO layer was analyzed using X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), so this result verifies the effect of the IPL annealing. Therefore, the r-GO/GO based ReRAM showed write-once read-many times (WORM) characteristics and high electrical characteristics such as (~10<sup>3</sup>) on/off ratio and (1000 switching cycles) endurance properties.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼