http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Development of a performance booster for the evaporator of window-type air conditioners
Jheng-Yi Li,Tun-Ping Teng 대한기계학회 2018 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.32 No.8
This study investigated the effect of a performance booster (PB) on the performance of a window-type air conditioner (WAC). The PB was fabricated using perforated aluminum plates with different pore size configurations according to the return air distribution of evaporator. The WAC was tested under various outdoor air conditions, and the performance of the WAC before and after PB installation was compared. Results showed that the PB effectively improved the performance of the WAC. The PB with three pore sizes improved the WAC performance more than the PB with two pore sizes. The maximum improvements in the WAC’s cooling capacity, dehumidification capacity, and energy efficiency ratio (EER) under the configuration with three pore sizes were 13.70 %, 59.63 % and 14.37 %, respectively, compared with the original WAC at an outdoor dry-bulb temperature of 30 °C.
Kim, Minji,Furuzono, Tomoya,Yamakuni, Kanae,Li, Yongjia,Kim, Young-Il,Takahashi, Haruya,Ohue-Kitano, Ryuji,Jheng, Huei-Fen,Takahashi, Nobuyuki,Kano, Yuriko,Yu, Rina,Kishino, Shigenobu,Ogawa, Jun,Uchid The Federation of American Societies for Experimen 2017 The FASEB Journal Vol.31 No.11
<P>Gutmicrobiota can regulate the host energymetabolism; however, the underlying mechanisms that could involve gut microbiota-derived compounds remain to be understood. Therefore, in this study, we investigated the effects ofKetoA [10-oxo-12(Z)-octadecenoic acid]-a linoleic acidmetaboliteproduced by gut lactic acid bacteria-on whole-body energy metabolism and found that dietary intake of KetoA could enhance energy expenditure in mice, thereby protecting mice from diet-induced obesity. By using Ca2+ imaging and whole-cell patch-clamp methods, KetoA was noted to potently activate transient receptor potential vanilloid 1 (TRPV1) and enhance noradrenalin turnover in adipose tissues. In addition, KetoA up-regulated genes that are related to brown adipocyte functions, including uncoupling protein 1 (UCP1) inwhite adipose tissue (WAT), whichwas later diminished in the presence of a b-adrenoreceptor blocker. By using obese and diabetic model KK-Ay mice, we further show that KetoA intake ameliorated obesity-associatedmetabolic disorders. In the absence of any observedKetoA-induced antiobesity effect or UCP1 up-regulation in TRPV1-deficient mice, we prove that the antiobesity effect of KetoAwas caused by TRPV1 activation-mediated browning inWAT. KetoA produced in the gut could therefore be involved in the regulation of host energy metabolism.-Kim, M., Furuzono, T., Yamakuni, K., Li, Y., Kim, Y.-I., Takahashi, H., Ohue-Kitano, R., Jheng, H.-F., Takahashi, N., Kano, Y., Yu, R., Kishino, S., Ogawa, J., Uchida, K., Yamazaki, J., Tominaga, M., Kawada, T., Goto, T. 10-oxo-12(Z)-octadecenoic acid, a linoleic acid metabolite produced by gut lactic acid bacteria, enhances energy metabolism by activation of TRPV1.</P>
Futalan, Cybelle M.,Huang, Yu-Shen,Chen, Jheng-Hong,Wan, Meng-Wei IWA Publishing 2018 Water Science & Technology Vol.78 No.3
<P>In the present work, the removal efficiency of As(V) from aqueous solution using chitosan-coated bentonite (CCB), chitosan-coated kaolinite (CCK) and chitosan-coated sand (CCS) was evaluated. The chitosan-based adsorbents were characterized using scanning electron microscopy, Fourier-transform infrared spectroscopy, the Brunauer–Emmett–Teller method and thermogravimetric analysis. Kinetic studies revealed that As(V) uptake using CCB, CCK and CCS fitted well with the pseudo-second order equation (<I>R<SUP>2</SUP></I> ≥ 0.9847; <I>RMSE</I> ≤ 9.1833). Equilibrium data show good correlation with the Langmuir model (<I>R<SUP>2</SUP></I> ≥ 0.9753; <I>RMSE</I> ≤ 8.5123; <I>SSE</I> ≤ 16.2651) for all adsorbents, which implies monolayer coverage onto homogenous energy sites. The Langmuir adsorption capacity for As(V) at pH 7.0 was determined to be 67.11, 64.85, and 16.78 mg/g for CCB, CCK and CCS, respectively. Thermodynamic studies show that As(V) uptake is exothermic in nature using CCK and endothermic using CCB and CCS. Moreover, adsorption of As(V) was feasible and spontaneous for CCB and CCS at 298 to 328 K. Results show that CCB is the most effective adsorbent in the removal of As(V) from water due to its high surface area and large pore diameter.</P>
A study of the fresh properties of Recycled ready-mixed soil materials (RRMSM)
Wen-Ling Huang,Her-Yung Wang,Chen Jheng-Hung 사단법인 한국계산역학회 2016 Computers and Concrete, An International Journal Vol.17 No.6
Climate anomalies in recent years, numerous natural disasters caused by landslides and a large amount of entrained sands and stones in Taiwan have created significant disasters and greater difficulties in subsequent reconstruction. How to respond to these problems efficaciously is an important issue. In this study, the sands and stones were doped with recycled materials (waste LCD glass sand, slag powder), and material was mixed for recycled ready-mixed soil. The study is based on security and economic principles, using flowability test to determine the water-binder ratio (W/B=2.4, 2.6, and 2.8), a fixed soil: sand ratio of 6:4 and a soil: sand: glass ratio of 6:2:2 as fine aggregate. Slag (at concentrations of 0%, 20%, and 40%) replaced the cement. The following tests were conducted: flowability, initial setting time, unit weight, dropweight and compressive strength. The results show that the slump values are 220 -290 mm, the slump flow values are 460 -1030 mm, and the tube flow values are 240-590 mm, all conforming to the objectives of the design. The initial setting times are 945-1695 min. The unit weight deviations are 0.1-0.6%. The three groups of mixtures conform to the specification, being below 7.6 cm in the drop-weight test. In the compressive strength test, the water-binder ratios for 2.4 are optimal (13.78-17.84 kgf/cm2). The results show that Recycled ready-mixed soil materials (RRMSM) possesses excellent flowability. The other properties, applied to backfill engineering, can effectively save costs and are conducive to environmental protection.
Ai-Huei Chiou,Tse-Chang Chien,Ching-Kuei Su,Jheng-Fong Lin,Chun-Yao Hsu 한국물리학회 2013 Current Applied Physics Vol.13 No.4
A simple and low cost method to generate single-crystalline, well-aligned silicon nanowires (SiNWs) of large area, using Ag-assisted electroless etching, is presented and the effect of differently sized Ag catalysts on the fabrication of SiNWs arrays is investigated. The experimental results show that the size of the Ag catalysts can be controlled by adjusting the pre-deposition time in the AgNO3/HF solution. The optimum pre-deposition time for the fabrication of a SiNWs array is 3 min (about 162.04 38.53 nm Ag catalyst size). Ag catalysts with smaller sizes were formed in a shorter pre-deposition time (0.5 min),which induced the formation of silicon holes. In contrast, a large amount of Ag dendrites were formed on the silicon substrate, after a longer pre-deposition time (4 min). The existence of these Ag dendrites is disadvantageous to the fabrication of SiNWs. Therefore, a proper pre-deposition time for the Ag catalyst is beneficial to the formation of SiNWs. SiNWs were synthesized in the H2O2/HF solution system for different periods of time, using Agassisted electroless etching (pre-deposition of the Ag catalyst for 3 min). The length of the SiNWs increases linearly with immersion time. From TEM, SAED and HRTEM analysis, the axial orientation of the SiNWs is identified to be along the [001] direction, which is the same as that of the initial Si wafer. The use of HF may induce SieHx bonds onto the SiNWarray surface. Overall, the Ag-assisted electroless etching technique has advantages, such as low temperature, operation without the need for high energy and the lack of a need for catalysts or dopants.