Influence of host plants on the development, survivorship, and fecundity of the summer fruit tortrix moth, Adoxophyes orana (Lepidoptera: Tortricidae)

Li Guang‐wei,Wang Hui‐min,Yang Wen‐tao,Chen Xiu‐lin,Li Bo‐liao,Chen Yu‐xin 한국곤충학회 2021 Entomological Research Vol.51 No.10

The summer fruit tortrix moth Adoxophyes orana is a seriously damaged leaf roller pest for fruit trees. In this study, we evaluated the effect of five host plants (apple, Malus domestica B.; peach, Prunus persica var. nectarina; apricot, Armeniaca vulgaris Lam.; mulberry, Morus alba L.; and jujube, Ziziphus jujuba M.) on the development, survival, and fecundity of A. orana under laboratory conditions. Results showed that the development times of A. orana on jujube were significantly longer than those on the other four plants. The preimaginal survival rate was influenced by the host plants, which were fed during the larval stage, and with the highest on peach, followed by apple, apricot, and mulberry, and with the lowest on jujube. Adult females from larvae reared on apricot laid the greatest numbers of eggs (318.11 eggs per female), while that on apple, jujube, and mulberry was smaller, and no significant difference was observed among them. The highest intrinsic rate of increase (rm) was observed on peach and apricot; these two fruit trees were considered to be the most suitable host plant for A. orana because of the shorter developmental duration, higher survival rate, and the highest fecundity.

W(110) 표면에 CO의 흡착

이경희,유위량,한현석,부진효,이순보,곽현태 성균관대학교 기초과학연구소 1998 論文集 Vol.49 No.-

The interaction of CO with W(110) surface was investigated through LEED, TDS, and photoelectron spectroscopy using synchrotron radiation under UHV condition. After CO saturation at RT, two desorption states, called α and β , were observed at about 400 and 1150 K in thermal desorption spectra, respectively. The kinetics of 3-CO followed the first order kinetics, indicating the existence of molecular CO on W(110) surface. This is contrary to the previous results. The O 1s BE(binding energy) of CO adsorbed on W(110) surface at room temperature was 529.9 eV. On the other hand, the O 1s BE of β-CO after heating to 900 K was different from that of oxygen adsorbed W(110) surface, suggesting a different adsorption state. According to the UP valence band spectra, we observed two peaks at near -10.7 eV (4σ) and -7.0 eV (5σ+1π), indicating the molecular adsorption of CO at room temperature. Furthermore we could see the 4σ peak at the various photon energy and elevated temperatures. Comparing the energy separation, Δ(4σ-1π) , between 4σ and 1π UP peaks of chemisorbed CO, we found that an increased separation reflects an decreased C-O bond strength. Therefore on the basis of TDS and photoelectron spectroscopy, we could suggest that β state of CO on W(110) may not be dissociated and has an adsorption geometry of lying-down mode.

Study on the Drive Parameters of a High-precision Basis Weight Control Valve

Bo Wang, Wei Tang,Jixian Dong,Feng Wang 한국펄프·종이공학회 2017 펄프.종이技術 Vol.49 No.3

Decreasing precision or mechanical damage may occur in basis weight valves because of excess design torque valves. Stepping motor driver current values are set at the rated motor current or are based on practical experience. Applied technological research on current setting values was conducted in this paper. A current-setting experimental device was developed to solve this problem. The drive parameters include the drive current value, mechanical strength of valve actuator and the state holding current value were tested. Finally, the acceleration time for the trapezoidal velocity curve was calculated, which was helpful to improve the positioning precision of the valve. The test result with a sample diameter of a DN125 basis weight valve showed that the reasonable current value stage was 3.71 A, and the state holding current value stage was 50%. Then, the acceleration and deceleration times of the trapezoidal velocity curve were both set at 0.01 seconds. The positioning precision was able to match the requirements of a basis weight control valve for 10,000 steps in which an error of 1 step was less than 5.0% during 10,000 positioning steps under such drive parameters.

Active Disturbance Rejection Control for Nanopositioning Systems with Piezoelectric Actuators

Wei Wei,Ran Zhang,Jing Wang,Guang-Bo Hao 제어로봇시스템학회 2016 제어로봇시스템학회 국제학술대회 논문집 Vol.2016 No.10

Nanopositioning proposes a high demand for its control system. However, hysteresis, a common nonlinear phenomenon existing in piezoelectric actuator, decreases precision of nanopositioning. In this paper, active disturbance rejection control (ADRC) is designed to estimate and cancel the influence of hysteresis, and integral time absolute error (ITAE) optimal index is chosen to determine the parameters of ADRC. Simulations are performed on the basis of mathematic model of nanopositioning system, and numerical results show that ADRC is effective in the control of nanopositioning.

Surface-functionalized Hexagonal Mesoporous Silica Supported 5-(4-Carboxyphenyl)-10,15,20-triphenyl Porphyrin Manganese(III) Chloride and Their Catalytic Activity

Wei-jie Zhang,Pingping Jiang,Ping-bo Zhang,Jia-wei Zheng,Haiyang Li 대한화학회 2012 Bulletin of the Korean Chemical Society Vol.33 No.12

Manganese(III) 5-(4-carboxyphenyl)-10,15,20-triphenyl porphyrin chloride (Mn(TCPP)Cl) was grafted through amide bond on silica zeolite Y (HY), zeolite beta (Hβ) and hexagonal mesoporous silica (HMS). XRD, ICP-AES, N2 physisorption, SEM, TEM, FTIR and thermal analysis were employed to analyse these novel heterogeneous materials. These silica supported catalysts were shown to be used for epoxidation and good shape selectivity was observed. The effect of support structure on catalytic performance was also discussed. The catalytic activity remained when the catalysts were recycled five times. The energy changes about epoxidation of alkenes by NaIO4 and H2O2 were also computationally calculated to explain the different catalytic efficiency.

Well-being Technology for Healthcare

Bo-Wei Chen,Wen Ji,Seungmin Rho,Chun-Wei Lin ICT플랫폼학회 2014 JOURNAL OF PLATFORM TECHNOLOGY Vol.2 No.2

De novo assembly and transcriptome analysis of differentially expressed genes relevant to variegation in hawthorn flowers

Wei Ji,Wei Zhao,Rong‑Chen Liu,Xiao‑Bo Jiao,Kai Han,Zhong‑Yi Yang,Mei‑Ying Gao,Rui Ren,Xiu‑Juan Fan,Ming‑Xia Yang 한국식물생명공학회 2019 Plant biotechnology reports Vol.13 No.6

Flower color variegation has been observed in many plant species. However, pink flowers on the white-blooming hawthorn trees found by our group earlier have never been reported. To better understand the differentially expressed genes (DEGs) in variegated hawthorn flowers, white and pink flowers at different developmental stages (S1 and S2) underwent transcriptome sequencing separately. Approximately 34.28 Gb of high-quality data were obtained and assembled into 100,013 unigenes with an average length of 706.93 bp. These unigenes were further subjected to functional annotation and biochemical pathway analysis, and DEGs of two types of hawthorn flowers at different developmental stages were studied. Based on the enrichment analysis of DEGs, eight anthocyanin-modified enzyme genes or other enzyme genes that indirectly affect anthocyanin synthesis (5AT, 3GGT , and AI, β-Glu, two Aux/IAAs, two PODs), eight structural genes (UFGT, DFR, CHI, two F3Hs, and three PALs), and three transcription factors (one MYB and two bHLHs) were also identified. We randomly selected 15 genes, and the trends in the expression levels of these genes in the organs of white and pink flowers at different developmental stages were verified by quantitative real-time PCR. Mass sequence data obtained by RNA-seq of variegated hawthorn flowers provided basic sequence information and a unique opportunity to uncover the genetic mechanisms under-lying flower color variegation.

Chemical Constituents from the Aerial Parts of Isodon coetsa and their Cytotoxicity

Wei Zhao,Jian Xin Pu,Xue Du,Yong Zhao,Fei He,Hai Bo Zhang,Yong Bo Xue,Wei Lie Xiao,Han Dong Sun,Ying Li Wu,Guo Qiang Chen 대한약학회 2011 Archives of Pharmacal Research Vol.34 No.12

Three new compounds (1-3), including a neolignan, a triterpenoid, and a diterpenoid, together with twenty known compounds (4-23), were isolated from the aerial parts of Isodon coetsa. Their structures and relative configurations were elucidated on the basis of spectroscopic data. Compounds 1, 3, 5-9, 11-13, 16-17, and 19-23 were evaluated for their cytotoxicity against HT-29, BEL-7402, and SK-OV-3 human tumor cell lines. Compound 7 showed significant inhibitory effects on all three types of cells, with IC50 values of 2.52, 3.06, 2.14 μM, respectively.

Application on Web Page Filtering Technology

Bo Shen,Lei Li,Ning-wei Wang 보안공학연구지원센터 2014 International Journal of Multimedia and Ubiquitous Vol.9 No.12

Web page filtering technology intends to filter out the large number of the repeated and theme-unrelated noise information and obtain useful information. Some web filtering methods cannot make full use of the layout and visual features. In view of the new mainstream “DIV+CSS” designing style of modern commercial web sites, this paper summarizes that elements laying in the same div blocks have common semantic features and proposed a DIV_FOREST model to represent the web pages. And in combination with the Vision-based Page Segmentation Algorithm, a DVPS Algorithm which considers both layout features and visual features was proposed to improve web page filtering efficiency.

A Novel Method of Self-Healing in Cementitious Materials by Using Polyacrylic Hydrogel

Bo Zhu,Qiu Li,Wei Chen,Wei Zou,Wanyu Chen 대한토목학회 2020 KSCE JOURNAL OF CIVIL ENGINEERING Vol.24 No.11

Cementitious materials are the most widely used in the construction. However, cementitious materials have defects such as low tensile strength which is easy to cause the formation of cracks. In recent years, with the research and application of smart materials, intelligent cementitious materials with self-sensing, self-diagnosis and self-healing functions have received extensive researcher’s attention. In this paper, a polyacrylic hydrogel that could be utilized for self-healing of cementitious materials was designed, and the three-dimensional network structure of the hydrogel controlled the release rate of encapsulated repair agent. The phosphate-incorporated hydrogel was filled into cement slurry to prepare self-healing cementitious materials. After the cement sample cracked and water penetrated into the crack, the phosphate was released from hydrogel. Phosphate reacted with the calcium in the pore solution to form hydroxyapatite type minerals which healed the crack. The self-healing cementitious material is in a position to heal cracks of 300 μm in width. After healing for 28 days at 20oC and 95% of RH, the compressive strength of precracked specimens could reach 85% of that of intact ones.