http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Anycast 구조와 BGP ECMP를 활용한 효율적인 DDoS 공격 방어 기법에 대한 연구
홍윤석(Yun Seok Hong),한우영(Wooyoung Han) 한국정보통신학회 2022 한국정보통신학회 종합학술대회 논문집 Vol.26 No.1
웹에서 서비스하는 시스템이 점차 늘어나며 웹 서비스의 정상적인 운영을 방해하는 사이버 공격의 규모도 커지는 추세이다. 특히 정상적인 웹 서비스 운영을 방해하는 DDoS (분산 서비스 거부 공격)또한 늘어나고 있다. 따라서 본 논문에서는 주요 공격 근원지의 국가나 도시 단위로 PoP을 운영하여 Anycast 형태의 네트워크에서 BGP ECMP(Equal Cost Multi Path) 라우팅 기법을 활용한 효율적인 DDoS 공격 방어의 기법을 제시하고, 고가용성의 웹 서비스를 운영할 수 있는 방법에 대해 기술한다. As the number of online systems based on the internet gradually increases, cyber-scale attacks that interfere with the normal operation of web services are also on the rise. In particular, distributed denial-of-service attacks (DDoS) that interfere with normal web service operations are also increasing. Therefore, this paper presents an efficient DDoS attack defense technique utilizing Equal Cost Multi-Path (BGP ECMP) routing techniques in networks of Anycast type by operating PoP basis of major attack sources and describes how high-availability web services can be operated.
홍윤석 ( Yoon Seok Hong ),기경서 ( Kyung Seo Ki ),권가진 ( Gahgene Gweon ) 한국정보처리학회 2018 한국정보처리학회 학술대회논문집 Vol.25 No.1
본 연구에서는 심층 합성곱 신경망(Deep CNN)과 Connectionist Temporal Classification (CTC) 알고리즘을 사용하여 강제정렬(force-alignment)이 이루어진 코퍼스 없이도 학습이 가능한 음소 인식 모델을 제안한다. 최근 해외에서는 순환 신경망(RNN)과 CTC 알고리즘을 사용한 딥 러닝 기반의 음소 인식 모델이 활발히 연구되고 있다. 하지만 한국어 음소 인식에는 HMM-GMM 이나 인공 신경망과 HMM 을 결합한 하이브리드 시스템이 주로 사용되어 왔으며,이 방법은 최근의 해외 연구 사례들보 다 성능 개선의 여지가 적고 전문가가 제작한 강제정렬 코퍼스 없이는 학습이 불가능하다는 단점이 있다. 또한 RNN 은 학습 데이터가 많이 필요하고 학습이 까다롭다는 단점이 있어,코퍼스가 부족하 고 기반 연구가 활발하게 이루어지지 않은 한국어의 경우 사용에 제약이 있다. 이에 본 연구에서는 강제정렬 코퍼스를 필요로 하지 않는 CTC 알고리즘을 도입함과 동시에,RNN 에 비해 더 학습 속도가 빠르고 더 적은 데이터로도 학습이 가능한 합성곱 신경망(CNN)을 사용하여 딥 러닝 모델을 구축하여 한국어 음소 인식을 수행하여 보고자 하였다. 이 모델을 통해 본 연구에서는 한국어에 존재 하는 49 가지의 음소를 추출하는 세 종류의 음소 인식기를 제작하였으며,최종적으로 선정된 음소 인식 모델의 PER(Phoneme Error Rate)은 9.44 로 나타났다. 선행 연구 사례와 간접적으로 비교하였을 때,이 결과는 제안하는 모델이 기존 연구 사례와 대등하거나 조금 더 나은 성능을 보인다고 할 수 있다.
다단 환원형 유동층에서 J-valve의 운전변수에 따른 고체 흐름량 및 기체 우회
홍윤석(Yoon Seok Hong),강경수(Gyung Soo Kang),박주식(Joo Sik Park),이동현(Dong Hyun Lee) 한국청정기술학회 2011 청정기술 Vol.17 No.1
다단 환원형 유동층 반응기(상승관: 0.01 × 0.025 × 2.8 m³, J-valve: 0.009 × 0.015 m²)에서의 수력학적 특성을 연구하였다. 층물질로는 glass beads (dp = 101 μm, ρb = 1,590 kg/m³, Umf = 1.25 × 10<SUP>-2</SUP> m/s, Galdart B)를 사용하였다. Batch 상태에서 고체흐름량을 측정하기 위하여 전자저울을 사용하여 누적된 무게로 계산하였다. 연속공정에서는 고체순환량를 측정하기 위하여 고체가 순환상태에서 사이클론 하단의 3-way 밸브를 이용하여 일정시간에 누적된 무게로 계산하였다. 또한 정상상태에서 가열된 입자가 열전대를 통과하는 시간을 측정하여 고체순환량을 계산하였다. 고체의 흐름량은 주입 기체의 유속(1.2~2.6 Umf)과 층높이(z, 0.24~0.68 m)가 증가함에 따라 2.2 에서 23.4 kg/s로 증가하였다. 이때 고체체류시간은 440에서 1,438 s까지 변화하였다. 상승관내의 고체 체류량을 확인하기 위하여 각 구간에서의 압력강하를 측정하여 고체 체류량을 계산하였다. 본 연구에서 얻어진 고체체류량 분포는 end effect를 갖는 exponential decay model 의 형태로 나타났다. 상단 유동층에서 중단 유동층으로의 기체 우회을 확인하기 위하여 상단 유동층으로 주입되는 공기에 일정 조성의 CO₂ 추적기체를 주입한 후, 기체 분석기를 이용하여 중단 유동층의 배출기체중 CO₂가 우회되는 양을 측정하였다. 측정된 기체우회(gas bypassing)양은 2.6% 미만으로 그 영향이 크지 않는 것으로 판단하였다. Hydrodynamic characteristics in multistage annular type fluidized bed (riser: 0.01 × 0.025 × 2.8 m³, J-valve: 0.009 ×0.015 m²) were investigated. Glass beads (dp = 101 μm, ρb = 1,590 kg/m³, Umf = 1.25 × 10<SUP>-2</SUP> m/s, Geldart classification B) was used as a bed material. Accumulated weight by the electronic balance was measured to determine the solid flow rate in batch-type. In circulation condition, we measured the accumulated weight of particle transported from riser. At the steady state condition, solid circulation rate was calculated from time interval of the heated bed material passing between two thermocouples. Solid flow rate increased with increasing inlet gas velocity (1.2-2.6 Umf) and the static bed height (z, 0.24-0.68 m) from 2.2 to 23.4 kg/s. However, mean residence time decreased with increasing inlet gas velocity (1.2-2.6 Umf) and the static bed height (z, 0.24-0.68 m) from 1,438 to 440 s. The solid holdup in the riser was determined by measuring pressure differences according to the riser height. These results showed a similar trend to that of simple exponential decay type except for the top section of the riser. To verify the gas bypassing from top bubbling beds to middle bubbling beds, CO₂ gas was injected by tracer gas in constant ratio, and then was measured CO₂ concentration in outlet gas by gas chromatography. Gas bypassing occurred below 2.6% which is negligible value.
홍윤석(Yun-Seok Hong),윤진철(Jin-Chul Yun),권태훈(Tae-Hoon Kwon),서연호(Yeon-Ho Seo),배재득(Jae-Deok Bae) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.11
Fluid catalytic cracking (FCC) is one of the most important conversion process used in petroleum refineries. It is widely used to convert the high-boiling and high-molecular weight hydrocarbon fractions of petroleum crude oils to more valuable oil products. The purpose of this study is to verify the structural integrity of integrated system including reactor, regenerator and catalyst standpipes which are the core facilities of FCC. The fundamental process design of FCC is provided by licensor and the details of reactor and regenerator are designed by using an in-house program based on the ASME Sec.Ⅷ, Div.1. To get more conservative results, a variety of load conditions such as dead weight, pressure, thermal expansion, seismic and wind loads are applied in the structural strength assessment. The structural piping analysis considering the latest design specification of the specific vendor items like expansion joint, slide valve and spring hanger is performed and its result is provided to the related vendors to confirm their performance once more. From the comprehensive analysis results, it is concluded that the analyzed system is designed to have sufficient flexibility to prevent pipe movements from the elastic failure due to the overstress of the pipe components or anchors. The analysis results meet the requirement of all applicable design codes and licensor’s specification.
홍윤석(Hong, Yoon-Suk) 신영어영문학회 2012 신영어영문학 Vol.53 No.-
Chomsky (1998, 1999) suggests that expletive there has only u[person] rather than categorial [D]-feature and Chomsky(1999, 2000, 2004, 2005) consistently argues that expletive there externally merges in [Spec, TP] to check the EPP of T. He also suggests that expletive there be a Probe and T be a Goal. This suggestion, however, is problematic in explaining expletive there as an EPP checker. To solve problems with Chomsky’s (2000, 2004, 2005) approach to expletive there, this paper adopts Kim & Lee’s (2004, 2008) proposal that expletive there externally merges in [Spec, vP], not in [Spec, TP], and moves to [Spec, TP] to check the EPP of T, and shows, through the passive expletive constructions, that this sort of Merge satisfies Conditions on Agree in Chomsky (2000), EPP in Chomsky (2004), and the proposal that T should be a Probe and expletive there be a Goal in Chomsky (2005).