http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
평면 다수 입출력 전력 분배/결합회로의 2 GHz에서의 구조 수정 연구
한용인,조치성,김인석 한국항행학회 2002 韓國航行學會論文誌 Vol.6 No.4
본 논문에서는 하나의 입력과 다수의 출력을 가지는 [10]에서에서 제시한 평면 Taper 형의 전력 분배/결합기를 2GHz대역에서 수정한 구조를 제안한다. 제안하는ㄱ n조의 전기적 특성을 결정하는 파라메터들을 HFSS시뮬레이션을 이용하여 분석하였다. 입력 정합 그리고 각 출력 단에서 출력 신호의 균형과 위상의 선형성을 위해 회로의중앙에 하나의 원형 모양을 애칭 제거하였다. 또 본 논문에서 제안한 구조의 1:2와 1:3의 전력 분배/결합기외 [10]의 구조와 S-Parameter를 비교?분석하였다. 결과적으로 본 연구에서 제시하는 수정된 형태를 적용할 경우 기존의 전력 분배/결합기의 반사손실 특성이 2 GHz에서 20dB이상 개선되었고 대역폭 또한 증가되는 것을 확인하였다. In this paper, tapered shape of multiport power divider/combiner modified for 2 GHz range from the model published by [10] is proposed. Parameters determining electrical property of the circuit structure have been analyzed by HFSS simulation. For input matching, balance of output signals and phase linearity at each output port, one circular hole has been etched out on the circuit surface. 1:2 and 1:3 power dividers/combiners designed by this study have been compared with the same circuits designed by the method of [10] in terms of S-parameters. As a result, it has been found that the modified structure of power divider/combiner have improved return loss more than 20 dB and another 18 dB, respectively, at 2 GHz.
2 GHz 평면 테이퍼형 전력 분배/결합회로의 수정된 구조 연구
한용인,김인석 한국전자파학회 2002 한국전자파학회논문지 Vol.13 No.10
본 논문에서는 2 GHz 대역에서 하나의 입력과 다수의 출력을 가지는 [10]에서 제시 한 평면 Taper 혈의 전력 분배/결합기의 수정한 구조와 접지평면에 PBG(Photonic Band Cap) 구조를 적용한 형태의 전력 분배/결합 회로를 제안한다. 제안하는 구조의 전기적 특성을 걱정하는 파라메터들을 HFSS 시뮬레이션을 이용하여 분석하였다. 입력 정한 그리고 각 출력 판에서 출력 신호의 균형과 위상의 선형성을 위해 회로의 중앙에 하나의 원형 모양을 에칭 제거하였다. 또 본 논문에서 제안한 구조의 1:2와 1:3 전력 분배 / 결합기와 [10]의 구조와 5-Parameter를 비교ㆍ분석하였다. 결과적으로 본 연구에서 제시하는 수정된 형태를 적용할 경우 기존의 전력 분배/결합기의 반사손실 특성이 2 GHz에서 20 dB 이상 개선되었고. 이에 추가하여 PBG 구조를 적용하면 또 18 dB 이상 개선된 특성을 보였다. 대역폭 또한 증가되는 것을 확인하였다. In this paper, a 2 GHz tapered shape of multiport power divider/combiner modified from the model published by [10] and adopted PBG(Photonic Band Gap) structure is proposed. Parameters determining electrical property of the circuit structure have been analyzed by HFSS simulation. For input matching, balance of output signals and phase linearity at each output port, one circular hole has been etched out on the circuit surface. 1:2 and 1:3 power dividers/combiners designed by this study have been compared with the same circuits designed by the method of [10] in terms of S-parameters. As a result, it has been found that tile modified structure and PBG of power divider/combiner have improved return loss more than 20 dB and another 18 dB. respectively, at 2 GHz.
TEM 모드 유전체 공진기와 포스트를 이용한 새로운 마이크로스트립 대역통과 구조
유승렬,한용인,김인석 한국통신학회 2001 韓國通信學會論文誌 Vol.26 No.9
본 논문에서는 대역통과 필터특성을 위해 통과대역의 상단과 하단의 저지대역에서 감쇄극을 갖는 두 종류의 새로운 마이크로스트립 구조를 제안한다. 이 구조는 TEM모드의 유전체 공진기를 마이크로스트립선로에 용량성 또는 유도성의 병렬 포스트와 연결하여 구성된다. 제안한 구조에 대한 등가회로를 추출하였다. 이 구조의 S-파라미터를 실험과 등가회로 시뮬레이션으로 구하였고, 그리고 유도성포스트의 경우는 3D-FDTD 계산을 추가하여 서로를 비교하였는데 등가회로 모델이 이들 결과와 매우 잘 일치하였다.
DR 2개를 이용한 Push-Push FET DRO의 출력 증가
김인석,조치성,한용인 한국항행학회 2003 韓國航行學會論文誌 Vol.7 No.1
본 논문에서는 9개의 전형적인 Push-Push FTF DRO(Dielectric Resonator Oscillator:유전체 공진기 반진기)의 드레인단에 게이트단에서 이용했던 동일한 DR을 첨가하여 출력전력과 위상 잡음 특성변화를 실험적으로 조사하였다. 9개 발진기는 10GHz의 기본 주파수를 이용하여 20GHz를 발생할 수 있도록 설계되었고, 출력단에는 3개의 다른 종류의 전력 결합기를 채택했는데, 이들 각각에 대해 측정하였다. 결과적으로 Push-Push FTF DRO의 출력전력은 DR을 첨가함으로 향상되어질 수 있는 것과 위상잡음특성은 DR을 첨가하기 전과 대체로 같은 특성을 유지하는 것을 관찰할 수 있어다. In this paper, the output power level and phase noise property of nine conventional push-push FET DROs (Dielectric Resonator Oscillator) have been experimentally investigated by adding one more identical DR at the drain port. The nine oscillators designed to generate 20 GHz from 10GHz fundamental frequency, have been tested for each of three different power combiners at the output port. It has been observed that the output power level of the push-push FET DROs can be improved by placing the DR while maintaining their phase noise characteristics were approximately the same as before adding the DR.