http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
요실금 치료용 자기 자극기의 자속밀도 및 유도전류 측정
한병희,최경무,조민형,이수열,Han, Byung-Hee,Choi, Kyung-Moo,Cho, Min-Hyoung,Lee, Soo-Yeol 대한의용생체공학회 2009 의공학회지 Vol.30 No.4
A simple method for measuring magnetic flux and induced current in magnetic nerve stimulation for urinary incontinence treatment is proposed. Unlike electric nerve stimulation, direct measurement of the induced current in magnetic nerve stimulation is impossible. Since induced currents stimulate nerves or muscles in magnetic nerve stimulation, measuring induced current is very important in validating stimulation efficacy and securing safety. The magnetic flux measuring system is composed of 6 layers with pick-up coils of 7 by 7 in each layer, and the induced current measuring system is composed of 6 layers with 7 concentric circular coils in each layer. The proposed method can be used in the design or performance test of a magnetic nerve stimulator for many clinical applications such as urinary incontinence treatment, activation of peripheral nerves, and transcranial magnetic stimulation.
3.0 T MRI 환경에서 마이크로비드를 이용한 서브복셀 추적에 관한 수치해석적 연구
한병희,이수열,Han, Byung-Hee,Lee, Soo-Yeol 대한의용생체공학회 2007 의공학회지 Vol.28 No.1
In molecular imaging studies via magnetic resonance imaging, in vivo cell tracking is an important issue for the observation of cell therapy or disease behavior. High resolution imaging and longitudinal study are necessary to track the cell movement. Since the field inhomogeneity extends over several voxels, we have performed the numerical analysis using the sub-voxel method dividing a voxel of MR image into several elements and the information about the field inhomogeneity distribution around the micro-beads. We imbedded ferrite-composite micro-beads with the size of $20-150{\mu}m$ in the subject substituted for cells to induce local field distortion. In the phantom imaging with the isotropic voxel size of $200{\mu}m^3$, we could confirm the feasibility of sub-voxel tracking in a 3.0 T MRI.
활성화시킨 Cu-Zn 과 히드라진을 이용한 방향족 니트로 화합물의 환원반응
한병희,신대현,이현노,Byung Hee Han,Dae Hyun Shin,Hyun Ro Lee 대한화학회 1989 대한화학회지 Vol.33 No.6
Activated Cu-Zn by the reaction of aqueous cupric sulfate and excess Zn showed the exceptional catalytic activity for the reduction of aromatic nitro compounds to the corresponding amino compounds in the presence of hydrazine monohydrate in ethanol. But, aliphatic nitro compounds were not reduced to the amino compounds. 황산구리 수용액에 과량의 아연을 반응시켜 만든 구리-아연은 히드라진 존재하에서 방향족 니트로 화합물을 아미노 화합물로 환원시키는데 좋은 촉매작용을 보여주었다. 그러나 지방족 니트로 화합물의 환원반응은 진행되지 않았다.
한병희 ( Byung Hee Han ),최일수 ( Il Soo Choi ),최용 ( Yong Choi ),윤영태 ( Young Tae Yun ),유수남 ( Soo Nam Yoo ) 한국농업기계학회 2016 한국농업기계학회 학술발표논문집 Vol.21 No.2
현재 국내의 경우 4륜 승용관리기가 개발되었으나 비닐피복재배 등 작업상 제약과 동일한 작목이라도 다양한 재배양식에 따른 차폭 조절 곤란, 대부분 후방 작업기 부착으로 인한 작업상태 확인 곤란 등 성능 미비와 편이성 부족으로 승용관리기 및 부속작업기 보급이 매우 저조한 상태이다. 본 연구는 밭작물 관리작업의 승용기계화를 통한 체계적인 전작업과정 기계화를 위하여 다양한 우리나라의 밭작물 재배양식에 적용할 수 있도록 지상고 제고, 차폭 조절, 조향 등의 성능개선과 작업기 복부장착으로 작업의 정밀도, 편이성, 관측의 용이성 향상을 기할 수 있는 3륜 승용관리기를 개발하기 위하여 시작기를 설계·제작하였다. 기체의 경량화를 위하여 약 15 kW 출력의 공랭식 4행정 가솔린 엔진을 탑재하였으며, 주행부까지의 동력전달은 3륜 구동방식으로 주변속은 HST 무단변속장치, 부변속은 2단 선택맞물림기어식변속장치를 이용하였고, 주행속도는 전진 고속 0.0-14.5 km/h, 전진 전속 0.0-7.8 km/h, 후진 고속 0.0-7.5 km/h, 후진 저속 0.0-4.0 km/h로 설계·제작하였다. 주행부는 견인력 증대를 위하여 전륜을 구동토록 하였으며, 다양한 밭작물 재배양식에 대응하기 위하여 후륜 구동바퀴의 폭을 유압실린더를 이용하여 1320-1720 mm 범위로 조절 가능하도록 하였다. 또한 주행부는 선회반경 감소를 위하여 전륜배속장치 채용으로 급속선회가 가능하도록 설계·제작하였다. 유압장치부는 정유압변속장치 외에 작업기의 정밀한 위치제어, 조향제어, 후륜 차륜 폭 조절을 유압실린더를 이용하여 수행하도록 하였으며, 작업기 부착장치부는 평행링크식으로 주요 관리작업기를 복부에 부착하며, 작업기 승강높이를 약 391 mm로 설계·제작하였다.
유기 초음파화학. 초음파가 히드라진, 철, 활성탄을 이용한 방향족 니트로기의 환원반응에 미치는 영향
신대현,한병희,조성윤,Dae Hyun Shin,Byung Hee Han,Sung Yun Cho 대한화학회 1986 대한화학회지 Vol.30 No.1
초음파(50KHz)가 상온 상압하에서 히드라진 철 활성탄을 이용한 방향족 니트로기를 방향족 아미노기로의 환원반응을 크게 가속시켜 3시간만에 100% 전환율을 얻을 수 있었다. 활성탄은 탈색이나 반응성이 큰 물질의 분말을 섞는데 사용되어 왔으나 히드라진 철을 이용한 방향족 니트로기의 환원반응에서는 활성탄 없이는 반응이 전혀 일어나지 않으며 활성탄의 증가에 따라 환원율이 높아지는 결과를 얻었다. Ultrasound(50KHz) accelerated the reduction reaction of aromatic nitro group to aromatic amino group in high yield with mild condition using iron, hydrazine hydrate and activated carbon under room temperature and atmospheric pressure. The activated carbon has been used as a mixing material to highly active metals. However, aromatic nitro group does not reduce at all only with iron-hydrazine witliout adding activated carbon even under ultrasonic irradiation. We also discovered that the conversion yield from nitro group to amino group is directly proportional to the amount of activated carbon.