http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
건식 바텀애시 경량 잔골재와 소성 인공경량 굵은골재를 사용한 콘크리트의 기초 특성
최홍범,김진만 한국건설순환자원학회 2018 한국건설순환자원학회 논문집 Vol.6 No.4
습식바텀애시가 경량골재로서 오랫동안 사용되어 왔지만, 화력발전소에서 배출되는 새로운 타입의 건식 바텀애시에 관해서는거의 연구되지 않았다. 건식 바텀애시는 건설재료의 관점에서 매우 우수한 경량골재이다. 본 연구는 경량골재 콘크리트의굳지않은 상태 및 경화상태에서의 다양한 특성을 실험적으로 검토함으로서 바텀애시 경량골재가 경량골재 콘크리트용 잔골재로서의 사용 가능성이 있는지의 여부를 평가한 것이다. 연구결과 건식 바텀애시 대체율 75%까지 슬럼프 저하가 크지 않게나타났고, 공기량은 건식 바텀애시의 대체율에 영향을 미치지 않는 것으로 나타났다. 콘크리트의 블리딩량은 건식 바텀애시대체율 75%이하에서는 0.025㎤/㎠미만으로 나타났으며, 콘크리트 경화 후 압축강도에서는 대체율 75%까지 강도 저하율이10% 미만으로 나타났다. 잔골재를 건식 바텀애시로 100% 대체시 절건 단위질량은 8.9%의 감소를 보였고, 건식 바텀애시잔골재 대체율이 증가할수록 건조수축이 감소하는 경향을 보였다. 콘크리트 탄성계수는 건식 바텀애시 잔골재 대체율 50%까지는 저하를 보이지 않았지만, 대체율이 그 이상으로 증가시 탄성계수가 저하하였다. 이상의 결과로부터 건식 바텀애시는잔골재로 사용 시 다른 잔골재와 혼합 사용할 경우 품질의 저하 없이 사용하는 것이 가능함을 알 수 있었다.
경량 모르터용 건식공정 바텀애시의 입형 개선 효과와 최적 입도
최홍범,김진만,선정수,한동엽,Choi, Hong-Beom,Kim, Jin-Man,Sun, Jung-Soo,Han, Dong-Yeop 한국건설순환자원학회 2015 한국건설순환자원학회 논문집 Vol.3 No.1
본 연구의 목적은 건식공정을 통해 생산된 바텀애시를 이용하여 친환경적이고 저렴한 경량콘크리트의 잔골재로 활용하는 것이다. 기존의 습식공정과 비교하여 건식공정은 물에 닿지 않고, 염분이 없으며, 다소 느린 공정으로 완전연소를 통해 미연소탄소성분이 거의 없다. 이러한 건식공정 바텀애시를 경량 모르터용 잔골재로서 타당성을 평가하기 위해 골재의 입형 개선 효과와 최적 입도분포의 두가지 단계로 나누어 실험을 실시하였다. 첫 번째 실험에서 추가적인 마쇄과정을 통해 얻어진 양호한 입형의 바텀애시는 유동성과 강도 측면에서 양호한 결과를 나타내었으며 다소간의 단위용적질량 증가를 보였다. 두 번째 실험에서 다양한 입도를 구성하여 실험을 실시하였고, 그 결과 표준입도에 맞추어진 입도에서 굳지 않은 상태 및 경화상태에서 양호한 성능을 나타내었다. 본 연구의 결과를 통해 차후 건식 공정을 통한 바텀애시의 활용방법이 확대되고, 바텀애시를 경량 잔골재로 활용함으로서 부가가치 상승에 기여할 것으로 예상된다. The aim of this research is suggesting dry processed bottom ash as a new and economical source of lightweight aggregate for mortar and concrete. The dry process of bottom ash is an advance method of water-free and no chloride because only cooled down by double dry conveyer belt systems. Furthermore, because of relatively slow cooling down process helps burning up the remaining carbon in bottom ash. Using this dry process bottom ash, to evaluate the feasibility of using as a lightweight aggregate for mortar and concrete, two-phase of experiments were conducted: 1) improving shape of the bottom ash, and 2) controlling grade of the bottom ash. From the first phase of experiment, additional abrasing process was conducted for round shape bottom ash, hence improved workability and compressive strength was achieved while unit weight was increased comparatively. Based on the better shape of bottom ash, from the second phase, various grades were adopted on cement mortar, standard grade showed the most favorable results on fresh and hardened properties. It is considered that the results of this research contribute on widening sustainable method of using bottom ash based on the dry process and increasing value of bottom ash as a lightweight aggregate for concrete.
촉진 양생한 무기계 MiDF 콘크리트에서 실리카질 원료의 반응성에 관한 기초 연구
최홍범,김진만 한국건설순환자원학회 2019 한국건설순환자원학회 논문집 Vol.7 No.2
In this paper, the reaction properties of silica source in the accelerated curing conditions using autoclave and the fundamental properties of inorganic Micro Defect Free(MiDF) concrete using silica source are studied. Studies show that Si ions elution rate from silica source in autoclave curing is higher in amorphous source. In tap water conditions, solids which is source after autoclaved curing show a higher mass reduction in amorphous materials, which is attributed to the higher elution rate of ion. In Ca(OH)2 solution conditions, amorphous materials show higher mass increase, due to increase in C-S-H minerals. From experiment for influence on the properties of MiDF concrete by using nano silica materials, the specimen with silica fume shows an increase in compressive strength and a decrease in absorption depending on replacement rate up to 5.5%, while nano silica with amorphous phase and high-fineness shows a decrease in compressive strength and decrease in the water absorption. The specimen with nano silica increases the pore below 10,000nm, but reduces pore between 10,000 and 100,000nm. The above results show that the porosity and absorption rate of MiDF concrete can be reduced by using amorphous nano-size silica. However, to reduce the pore of 50 to 10,000nm, better dispersion of nano material in the cement matrix will be necessary. We will focus on the this item in the next research.
코로나 19 사회적 거리두기 지원을 위한 엣지컴퓨팅 기반 저가형 감시 카메라 시스템 프로토타입 구현
최홍범(Hong-Beom Choi),박창현(Chang-Hyeon Park),김민영(Min-Young Kim),고영배(Young-Bae Ko) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
본 논문에서는 마스크 착용 여부 및 인원 계수의 기능이 있는 지능형 자동화 감시 카메라를 엣지 컴퓨팅 환경에서 구현하였다. 또한 이러한 기능은 추가적인 장비 교체 없이 기존의 장비에 엣지 단말을 추가하여 활용될 수 있어 그 비용이 크지 않으며 다양한 분야에서의 활용이 가능하다. 특히 재난 대응 상황에서 건물 내 인원 추정 등의 어플리케이션에 활용될 수 있을 것으로 예상된다. 본 논문에서는 엣지 컴퓨팅 기반의 환경에서 인원 계수와 마스크 착용 판별 기능을 구현하고, 데이터를 처리하는 지연 시간을 기존의 클라우드 오프로딩 방식과 비교하였다.