농촌 문화경관 관련시책과 마을숲.당산숲의 위상 제고를 위한 기초연구

최재웅,김동엽,Choi Jai-Ung,Kim Dong-Yeob 한국조경학회 2006 韓國造景學會誌 Vol.34 No.3

Rural areas dominates the country landscapes in size with less population and rich traditional heritages as well as natural landscapes. Rural community groves (RCG) and Dangsan groves have been established by community residents during a few hundred years, and most of them have been disturbed. Only a few RCGs and Dangsan groves remain for an extensive period with efforts from community residents. These remnant RCGs and Dangsan groves are highly evaluated representing Korean rural cultural landscapes. Sound understanding on the structure of the rural landscapes and their role on the rural community environment is required to provide an appropriate policy for managing rural landscapes. This study aims to understand the characteristics of RCGs and Dangsan groves in the cultural landscapes, to investigate policies and issues of the advanced countries on RCGs and Dangsan groves, and to overview domestic policies for rural landscapes. The study results showed that there is a close relationship between RCGs and main issues discussed in EU countries. Ministry of Agriculture & Forestry of Korea, Ministry of Environment and Rural Development Administration have to focus on the potential of RCGs and Dangsan groves for multi-functions of agricultural and rural areas, natural streams, rural amenity, direct subsidy for landscape preservation and rural tourism. Based on the findings, this study suggests that RCGs and Dangsan groves will provide benefits to develop rural-mountain-sea villages and to enhance country's landscapes as well as local landscapes.

내장형 시스템의 동시적 개발을 위한 이산 사건 시스템 형식론 기반 요구사항 평가 방법

최재웅,최창범,Choi, Jae-ung,Choi, Chang-beom 한국시뮬레이션학회 2018 한국시뮬레이션학회 논문지 Vol.27 No.2

최근 정보 통신 기술이 발전함에 따라, 내장형 시스템은 여러 산업 분야에 적용되고 있으며 더욱 복잡해지고 있다. 이로 인해, 내장형 시스템의 개발 비용과 시간도 덩달아 증가하고 있다. 본 논문에서는 내장형 시스템의 개발 비용 및 시간을 절감하기 위해서 내장형 시스템의 동시적 개발을 위한 이산 사건 시스템(DEVS) 형식론에 기반 요구사항 평가 방법을 제안한다. 본 논문에서는 요구사항 명세를 DEVS 원자 모델의 형태로 기술하는 방법을 제안하며, 이를 개발하여 만든 요구사항 모델과 요구사항 평가 대상 시스템을 비교하는 평가자 모델 및 이들을 활용하는 평가 방법을 제안한다. 또한, 요구사항 평가를 위해 만든 요구사항 모델을 내장형 시스템의 동시적 개발 과정에 활용하는 방법을 제안한다. 제안하는 요구사항 평가 방법에 대한 사례 연구로 키넥트 깊이 정보 처리 시스템에 대한 요구사항 평가를 진행하였다. As the technology of information and communication has developed over recent years, an embedded system is applied in multiple industries and becomes more complicated. For this reason, embedded system development cost and time are also increased. For decreasing the cost and time, this paper suggests requirement evaluation method for concurrent development of an embedded system based on Discrete Event System(DEVS) Formalism. This paper proposes a method of describing the requirements specification in the form of DEVS atomic model. Also, the paper proposes the evaluator model that compares evaluation target system and the requirements model that is an implementation of requirement specification and proposes the evaluation method using them. In addition, we propose a method to utilize the requirement model created for requirements evaluation in the concurrent development process of the embedded system. As the case study, this paper proceeds requirement evaluation of Kinect depth data processing system.

A1-25Nb계와 (A1,X)-25Nb계 (X = Cr, Cu, Fe, Mn)의 기계적 합금화에 의한 금속간 화합물의 형성 거동에 관한 연구

최재웅,강성군,Choi, Jae-Woong,Kang, Sung-Goon 한국재료학회 2001 한국재료학회지 Vol.11 No.9

In Al-25Nb binary system, it was observed only formation of $D0_{22}$ $Al_3Nb$ intermetallic compound after 5hr milling but it was not observed formation of meta stable phase like L1$_2$ phase. In this state, $D0_{22}$ $Al_3Nb$ fabricated had nano sized grain of approximately 20nm. Ternary systems, transition metals such as Cr, Cu, Fe, Mn were added 6~12at.% as substitution of Al, showed formation of $D0_{22}$ $Al_3Nb$ like Al-25Nb binary system. In Al- l2Cu-25Nb system, it was observed that broad XRD pattern like amorphization of Al and not observed formation of $D0_{22}$ $Al_3Nb$ after 5hr milling. But there was mixed phase of a lot of amorphous Al and little $D0_{22}$ $Al_3Nb$ through TEM. In the states of unalloyed, 5~7hr milling time, those showed exothermic reaction at 35$0^{\circ}C$, which was formation of $D0_{22}$ $Al_3Nb$ like Al-25Nb binary system. With increasing milling time to 10hr, $D0_{22}$ $Al_3Nb$ was transformed to mixed phase of amorphous and nanocryatlline, having approximately 10nm grain but the meta stable $Al_3Nb$ was not fabricated by adding transition metals.

Cu 미세 배선을 위한 무전해 Ni-B 확산 방지막의 Cu 확산에 따른 상변태 거동

최재웅,황길호,송준혜,강성군,Choi J. W.,Hwang G. H.,Song J. H.,Kang S. G. 한국재료학회 2005 한국재료학회지 Vol.15 No.11

The phase transformation of Ni-B diffusion barrier by Cu diffusion was studied. The Ni-B diffusion barrier, thickness of 10(Inn, was electrolessly deposited on the electroplated Cu interconnect. The specimens were annealed either in Ar atmosphere or in $H_2$ atmosphere from $300^{\circ}C\;to\;800^{\circ}C$ for 30min, respectively. Although the Ni-B coated specimens showed the decomposition of $Ni_3B$ above $400^{\circ}C$ in both Ar atmosphere and $H_2$ atmosphere, Ni-B powders did not show the decomposition of $Ni_3B$. The $Ni_3B$ was decomposed to Ni and B in hi atmospherr: and the metallic Ni formed the solid solution with Cu and the free B was oxidized to $B_2O_3$. However, both the boron hydride and free B were not observed in the diffusion barrier after the annealing in $H_2$ atmos There. These results revealed that the decomposition of $Ni_3B$ by Cu made the Cu diffusion continued toward the Ni-B diffusion barrier.

직선교량에 대한 디지털엔지니어링 모델의 선형연동 프로그램 개발

최재웅,강전용,김현민,Choi, Jae-Woong,Kang, Jeon-Yong,Kim, Hyun-Min 한국BIM학회 2020 KIBIM Magazine Vol.10 No.4

This report describes the development of a program that can be linked to an alignment and extracts related information using a prefab structured digital engineering model. The subject bridge was set as a straight alignment, the Superstructure type as Precast girder and the Substructure type as Precast pier and Cast-in-situ Abutment. We identified the variables required to create a digital engineering model and reviewed them to create the digital engineering model by entering them as numerical values in the program. In addition, it is configured so that the variables linked to the alignment can be entered numerically. The quantity takeoff can be calculated when the design is complete. The purpose of the program development presented in this report is to enable the designers to select the optimal alternative by designing a bridge that best fits their current situation, extracting the relevant information and then by providing it to the manufacturer and construction company.

무전해 Ni-B 도금을 이용한 플라즈마 디스플레이 버스 전극용 확산방지막의 열처리 영향

최재웅,황길호,홍석준,강성군,Choi Jae Woong,Hwang Gil Ho,Hong Seok Jun,Kang Sung Goon 한국재료학회 2004 한국재료학회지 Vol.14 No.8

Thin Ni-B films, 1 ${\mu}m$ thick, were electrolessly deposited on Cu bus electrode fabricated by electro deposition. The purpose of these films is to encapsulate Cu electrodes for preventing Cu oxidation and to serve as a diffusion barrier against copper contamination of dielectric layer in AC-plasma display panel. The layers were heat treated at $580^{\circ}C$(baking temperature of dielectric layer) with and without pre-annealing at $300^{\circ}C$($Ni_{3}B$ formation temperature) for 30 minutes. In the layer with pre-annealing, amount of Cu diffusion was lower about 5 times than that in the layer without pre-annealing. The difference of Cu concentration could be attributed to Cu diffusion before $Ni_{3}B$ formation at grain boundaries. However, the diffusion behavior of the layer with pre-annealing was similar to that of the layer without pre-annealing after $Ni_{3}B$ formation. With increasing annealing time, Cu concentration of both layers increased due to grain growth.

차량용 CO₂ 에어컨 사이클 성능 향상을 위한 일체형 팽창기-압축기 성능 해석

최재웅,임정택,김현진,Choi, Jae Woong,Lim, Jeong Taek,Kim, Hyun Jin 대한설비공학회 2018 설비공학 논문집 Vol.30 No.3

A design combining the use of a compressor and expander was introduced in order to improve the cycle performance of a $CO_2$ automotive air conditioning system. Both the compressor and expander used were of rotary vane type and were designed to share a common shaft in a housing. Numerical simulation was carried out to evaluate the merit of the combined unit. In a typical automotive air conditioning operating conditions, the COP of the system was improved by 8.7% by the application of the combined unit. The compressor input was reduced by 5.2% through use of the expander output. In addition, about 3.06% increase in the cooling capacity was obtained through isentropic expansion in the expander. Our study noted that, as the pressure difference between the gas cooler and the evaporator becomes larger, the COP of the system improved increases unless the mass flow rate in the expander exceeds that in the compressor.

원주시 성남리 당산숲의 현황 및 경관관리 실태 고찰

최재웅,김동엽,이상화,김성기,Choi, Jai-Ung,Kim, Dong-Yeob,Lee, Sang-Hwa,Kim, Sung-Gi 한국조경학회 2007 韓國造景學會誌 Vol.35 No.3

Rural areas dominate country landscape, where the population is rich in traditional and natural heritage. Dangsan forests and Rural community forests (RCF) have been maintained by local residents for hundreds of years. However, many of these forests have been disturbed, and only small amount of Dangsan forests and the RCF remain due to the efforts of local residents. Recently, the remnants of Dangsan forests and RCF have been regarded as living traditional landscapes representing the cultural and rural background of Korea. But the value of Dangsan forests and the RCFs has not been recognized by many. This study aims to understand the characteristics and management status of Dangsan forests in Sungnam-ri, Wonju. Sungnam-ri has four villages, each of which is bordered by a Dangsan forest at the riparian buffer. Sungnam-ri has been selsected as a site for a rural village development project by the Ministry of Agriculture & Forestry of Korea. Sunghwanglim (the Upper Dangsan forest) is designated as Natural Monument No.93 and entrance is limited in this area. The size of Sunghwanglim is $21,133m^2$, and the major tree species are Kalopanax pictus (Dangsan tree, Divine tree), Pinus densiflora, Abies holophylla, Acer triflorum, Ulmus davidiana, Fraxinus rhynchophylla and Quercus serrata. In total, 124 trees with more than 40 cm in DBH are at this site. As for cultural activities, the Dangsan festival is held on April 8th and September 9th of the lunar calendar at shrines in the forests. Although other Dangsan forests are smaller than Sunghwanglim, they also have similar cultural activities. The landscape of the Dangsan forests have been managed for several hundred years by the local people, and they intend to continue maintaining the Dangsan forests for the purpose of festivals and other cultural activities. The findings in this study suggest that Dangsan forests have the potential for the development of rural villages and for the improvement of cultural and natural landscapes in Korea.

무전해 Ni-B 도금을 이용한 플라즈마 디스플레이 버스 전극의 확산 방지막 제조

최재웅,홍석준,이희열,강성군,Choi, Jae-Woong,Hong, Seok-Jun,Lee, Hee-Yeol,Kang, Sung-Goon 한국재료학회 2003 한국재료학회지 Vol.13 No.2

In this study, we have investigated the availability of the electroless Ni-B plating for a diffusion barrier of the bus electrode. The Ni-B layer of 1$\beta$: thick was electroless deposited on the electroplated Cu bus electrode for AC plasma display. The layer was to encapsulate Cu bus electrode to prevent from its oxidation and to serve as a diffusion barrier against Cu contamination of the transparent dielectric layer in AC plasma display. The microstructure of the as-plated barrier layer was made of an amorphous phase and the structure was converted to crystalline at about 30$0^{\circ}C$. The concentration of boron was about 5∼6 wt.% in the electroless Ni-B deposit regardless of DMAB concentration. The electroless Ni-B deposit was coated on the surface of the electroplated Cu bus electrode uniformly. And the electroless Ni-B plating was found to be an appropriate process to form the diffusion barrier.

Al-Ni계의 기계·화학적 방법으로 제조된 Raney Ni의 미세 구조 분석

최재웅,이창래,강성군,Choi, Jae-Woong,Lee, Chang-Rae,Kang, Sung-Goon 한국재료학회 2003 한국재료학회지 Vol.13 No.1

The Raney Ni catalyst was fabricated by mechanochemically process(MC process) in the Al-Ni system. Intermetallic compound obtained by mechanical alloying was leached in an alkaline solution. The characteristics of the mechanically alloyed powder and Raney Ni catalyst were analyzed by XRD, ICP-AES and EXAFS. In Al-50wt.%Ni, the metastable intermetallic compound phase close to AlNi phase was obtained by mechanical alloying unlike Al-Ni equilibrium phase diagram. The metastable intermetallic compound was transformed into $Al_3$$Ni_2$phase via the annealing at $750^{\circ}C$. The microstructure of Raney Ni fabricated by MC process was mainly bcc Ni including fcc Ni.