http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최영하,명형국,성굉모,Choi, Yeong-Ha,Myung, Hyung-Gook,Sung, Koeng-Mo 한국음향학회 1996 韓國音響學會誌 Vol.15 No.1
스피커 시스템의 음질을 객관적이면서도 정확하게 평가할 수 있는 방안을 제시한다. 무향실에서 측정한 주파수 특성에 근거하여 사람이 들었을 때의 여러 가지 느낌을 예측해 내는 방법을 제안하고, 이러한 절차를 통합적으로 처리할 수 있는 소프트웨어을 개발하였다. 개발된 소프트웨어를 세 종류의 오디오 스피커에 대하여 적용한 결과, 사람의 시청평가에 의한 결과와 매우 유사한 평가치를 나타내었다. Some investigations have been made to evaluate the sound quality of a loudspeaker system, objectively and accurately. Also, an algorithm is proposed to predict the various subjective values regarding loudspeaker performance based on the frequency response measured in anechoic chamber. A PC-based software that processes the proposed algorithm has also been developed. To verify the validity of the developed software, three loudspeakers has been evaluated using it and the evaluation results have been compared with the results of the listening test. The comparison between the two showed a good similarity.
심한 마모를 가진 환자에서 전자 서베잉을 이용한 금관 및 국소의치 수복 증례
최영하,김형섭,권긍록,배아란,노관태,백장현,홍성진,Choi, Youngha,Kim, Hyeong-Seob,Kwon, Kung-Rock,Pae, Ahran,Noh, Kwantae,Paek, Janghyun,Hong, Seoungjin 대한치과보철학회 2018 대한치과보철학회지 Vol.56 No.3
과도한 치아 마모를 가진 환자들을 치료를 시작할 때 수직교합고경의 상실과 수복을 위한 공간의 적절성으로 분류하게 된다. 본 증례의 환자는 80세의 여성으로 구치부 교합지지가 상실되어 대합치가 정출하면서 교합평면의 붕괴가 일어나고 잔존 치아의 마모 증가가 동반되어 보철을 위한 약간의 악간 공간의 상실이 발생하였다. 이러한 경우 최소한의 수직교합고경의 증가를 부여하고 안정화기간을 거쳐 안정된 교합접촉을 제공한다면 성공적으로 치료할 수 있다. 본 증례에서는 수직고경의 증가를 동반하여 단일 구조 지르코니아를 이용한 고정성 보철물과 상악 가철성 국소의치로 수복을 하였고 이러한 치료과정을 통하여 기능적, 심미적으로 만족스러운 결과를 얻어 보고하는 바이다. Excessive tooth wear results in unacceptable damage to the occlusal surface and can cause pulpitis, occlusal disharmony, dysfunction, and unesthetic result. Patients with severe attrition have to be classified as several types relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. The patient in this case was a 80 - year - old woman who lost support of posterior occlusion and collapsed of the occlusal plane due to confrontation of the opposing teeth, accompanied by an increase in the number of remaining bristles, resulting in a loss of intermaxillary space for prosthesis. In this case, treatment with increased vertical dimension may have stability if the increase in vertical occlusal height is minimized within the required range, and a stable occlusal contact is provided after an increased vertical occlusal height stabilization period. After the new VDO had been confirmed under interim fixed restorations, definitive fixed restorations were produced. Through these treatment processes, we obtain satisfactory results that are functional and aesthetically pleasing.
시설 냉방 방법이 토마토와 고추의 생육 및 수량에 미치는 영향
최영하(Young Hah Choi),권준국(Joon Kook Kwon),이재한(Jae Han Lee),강남준(Nam Jun Kang),조명환(Myeong Whan Cho),손병구(Beung Gu Son) 한국원예학회 2004 원예과학기술지 Vol.22 No.4
고온기 시설재배시 냉방방법별 냉방효과를 조사하고 이 효과가 토마토와 고추의 생육 및 수량에 미치는 영향을 검토하였다. 냉방방법은 무처리(주ㆍ야 무냉방), 주간냉방, 야간냉방, 주ㆍ야냉방의 4처리로 하였고, 주간냉방은 송풍식 연무기를 이용한 증발냉각으로, 야간냉방은 냉수순환 radiator 냉풍기를 이용하였다. 시설내의 주간 최고온도는 냉방처리구가 무처리구보다 4℃정도 낮았으나외부온도보다는 2℃정도 높았다. 상대습도는 무처리에 비해 주간냉방은 10~20%정도, 야간냉방은 5%정도 높았다. 주간의 온도와 습도는 외부 기상에 따른 차이가 컸다. 시설냉방이 토마토의 생육과 수량에는 큰 영향을 미치지 못했는데, 주간 고온에 의한 화기의 피해, 착과제처리의 영향 등이 그 원인으로 생각되었다. 고추는 냉방방법별 생육 차이는 없었으나 수량은 유의한 차이가 있었는데, 주ㆍ야냉방구와 야간냉방구가 가장 많았고, 다음이 주간냉방구, 무처리 순이었다. 이 같은 수량차이의 원인은 냉방에 의해 소모억제된 영양이 생식기관으로 전류되어 착과에 좋은 영향을 미쳤거나 또는 송풍에 의해 수분이 촉진되었을 수도 있는 등 복합적인 요인으로 생각된다. This experiment was conducted to investigate the efficiency of cooling according to the cooling methods and test the growth and yield of tomatoes and peppers grown in the greenhouses during summer. The cooling methods were composed of the non-cooling, daytime cooling, nighttime cooling and all-day cooling. The daytime cooling induced by evaporation system utilizing an air cooler, the nighttime cooling induced by air flow using a fan with radiator. The highest room temperature was 4℃ lower in cooling than non-cooling and was 2℃ higher in cooling than out door temperature. The relative humidity was 10 to 20% and 5% higher in daytime and nighttime cooling than non-cooling, respectively. The room temperature and the relative humidity of the daytime were affected greatly by outside environment. The growth and yield of tomatoes made little differences from the cooling methods because of the other factors such as flower organ demage by high temperature and fruiting chemicals. The growth of peppers were not significantly differences between cooling methods, while the yield was highest in all-day and nighttime cooling, followed by daytime cooling and non-cooling. Results showed that the cooling had a great effect on the fruiting and yield of peppers, because of complex factors such as nutrition accumulated by cooling and pollination accelerated by air flow.
카뷰레터 전후단 압력차에 의한 소형원동기의 혼합기 유동 특성
최영하(Youngha Choi),김병국(Byeong-guk Kim),오진우(JinWoo Oh),이동근(Dongkeun Lee),윤석주(Suckju Yoon),김동선(Dongsun Kim),한종규(Jongkyu Han) 한국자동차공학회 2008 한국자동차공학회 지부 학술대회 논문집 Vol.2008 No.11
This paper presents the pressure of carburetor air inlet and outlet and performance of a small spark-ignited gasoline engine. The engine used in this paper is a single cylinder, two-stroke, air-cooled 23cc SI engine for brush cutter. We measured the RPM, torque, fuel consumption and air inlet pressure at carburetor front and back according to the throttle open ratio. The results showed that the pressure wave and difference of the carburetor front and back pressures was increased at increasing throttle area ratio, power and fuel flow-rate were increased at increasing difference of front and back pressures.
최영하(Youngha Choi),조성남(Sungnam Cho),김병국(Byeongguk Kim),조형문(Hyungmun Cho),윤석주(Suckju Yoon),한종규(Jongkyu Han) 한국자동차공학회 2007 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
This paper presents the effects of equivalence ratios and throttle open degrees on the emission and performance of a small spark-ignition gasoline engine. The engine used in this paper was a single cylinder, diaphragm carburetor, two-stroke, air-cooled 26㏄ engine for brush cutter. The rpm, torque, fuel consumption and CO emission were measured under the four different equivalence ratio and three different throttle degree conditions on the engine loads respectively. In addition, the difference of the rpm on the dynamometer and the engine was confirmed to verify the effect of clutch by using for transfer the engine power. The results showed that the maximum power and minimum fuel consumption could be obtained at λ=0.9 and 9% load of dynamometer, and also the leaner mixture tuning develops the lower CO emission.