http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김주현,천민우,좌성훈,Kim, Joo-Hyun,Chon, Min-Woo,Choa, Sung-Hoon 한국마이크로전자및패키징학회 2014 마이크로전자 및 패키징학회지 Vol.21 No.2
Flexible transparent conductive electrodes (TCEs) have recently attracted a great deal of attention owing to rapid advances in flexible electronic devices, such as flexible displays, flexible photovoltanics, and e-papers. As the performance and reliability of flexible electronics are critically affected by the quality of TCE films, it is imperative to develop TCE films with low resistivity and high transparency as well as high flexibility. Indium tin oxide (ITO) has been the most dominant transparent conducting material due to its high optical transparency and electrical conductivity. However, ITO is susceptible to cracking and delamination when it is bent or deformed. Therefore, various types of flexible TCEs, such as carbon nanotube, conducting polymers, graphene, metal mesh, Ag nanowires (NWs), and metal mesh have been extensively investigated. Among several options to replace ITO film, Ag NWs and metal mesh have been suggested as the promising candidate for flexible TCEs. In this paper, we focused on Ag NWs and metal mesh, and summarized the current development status of Ag NWs and metal mesh. The several critical issues such as high contact resistance and haze are discussed, and newly developed technologies to resolve these issues are also presented. In particular, the flexibility and durability of Ag NWs and metal mesh was compared with ITO electrode.
폴리머 기판 위에 전사된 실리콘 박막의 기계적 유연성 연구
이미경,이은경,양민,천민우,이혁,임재성,좌성훈,Lee, Mi-Kyoung,Lee, Eun-Kyung,Yang, Min,Chon, Min-Woo,Lee, Hyouk,Lim, Jae Sung,Choa, Sung-Hoon 한국마이크로전자및패키징학회 2013 마이크로전자 및 패키징학회지 Vol.20 No.3
현재까지 유연한 전자소자 개발은 주로 인쇄전자 기술을 이용한 유기재료 기반 위주로 연구 및 개발이 진행되어 오고 있다. 그러나 유기 기반의 소자는 성능 및 신뢰성에 많은 제약이 있다. 따라서 본 논문에서는 무기재료 기반의 실리콘 고성능 유연 전자소자를 개발하기 위한 방법으로 나노 및 마이크로 두께의 단결정 실리콘 박막을 transfer printing 기술을 이용하여 유연기판에 전사하여 제작하였다. 제작된 유연소자는 굽힘 시험과 인장 시험을 통하여 유연 신뢰성을 평가하였다. PI 기판에 부착된 두께 200 nm의 박막은 굽힘 시험 결과, 곡률 반경 4.8 mm 까지 굽힐 수 있었으며, 따라서 굽힘 유연성이 매우 우수함을 알 수 있었다. 인장 시험 결과 인장 변형률 1.8%에서 박막이 파괴되었으며, 기존 실리콘 박막에 비하여 연신율이 최대 1% 증가됨을 알 수 있었다. FPCB 기판에 부착된 마이크로 두께의 실리콘 박막의 경우 칩이 얇아질수록 굽힘 유연성이 향상됨을 알 수 있었으며, $20{\mu}m$ 두께의 박막의 경우 곡률 반경 2.5 mm 까지 굽힐 수 있음을 알 수 있었다. 이러한 유연성의 증가는 실리콘 박막과 유연 기판 사이의 접착제의 완충작용 때문이다. 따라서 유연 전자소자의 유연성을 증가시키기 위해서는 박막 제작 시 공정 중의 결함을 최소화하고, 적절한 접착제를 사용한다면 유연성을 크게 증가시킬 수 있음을 알 수 있었다. Development of flexible electronic devices has primarily focused on printing technology using organic materials. However, organic-based flexible electronics have several disadvantages, including low electrical performance and long-term reliability. Therefore, we fabricated nano- and micro-thick silicon film attached to the polymer substrate using transfer printing technology to investigate the feasibility of silicon-based flexible electronic devices with high performance and high flexibility. Flexibility of the fabricated samples was investigated using bending and stretching tests. The failure bending radius of the 200 nm-thick silicon film attached on a PI substrate was 4.5 mm, and the failure stretching strain was 1.8%. The failure bending radius of the micro-thick silicon film attached on a FPCB was 2 mm, and the failure strain was 3.5%, which showed superior flexibility compared with conventional silicon material. Improved flexibility was attributed to a buffering effect of the adhesive between the silicon film and the substrate. The superior flexibility of the thin silicon film demonstrates the possibility for flexible electronic devices with high performance.
롤투롤 인쇄공정 적용을 위한 차세대 나노입자 소결 기술
이은경,은경태,안영석,김용택,천민우,좌성훈,Lee, Eun Kyung,Eun, Kyoungtae,Ahn, Young Seok,Kim, Yong Taek,Chon, Min-Woo,Choa, Sung-Hoon 한국마이크로전자및패키징학회 2014 마이크로전자 및 패키징학회지 Vol.21 No.4
Recently, a variety of printing technologies, including ink jet, gravure, and roll-to-roll (R2R) printing, has generated intensive interest in the application of flexible and wearable electronic devices. However, the actual use of printing technique is much limited because the sintering process of the printed nanoparticle inks remains as a huge practical drawback. In the fabrication of the conductive metal film, a post-sintering process is required to achieve high conductivity of the printed film. The conventional thermal sintering takes considerable sintering times, and requires high temperatures. For application to flexible devices, the sintering temperature should be as low as possible to minimize the damage of polymer substrate. Several alternative sintering methods were suggested, such as laser, halogen lamp, infrared, plasma, ohmic, microwave, and etc. Eventually, the new sintering technique should be applicable to large area, R2R, and polymer substrate as well as low cost. This article reviews progress in recent technologies for several sintering methods. The advantages and disadvantages of each technology will be reviewed. Several issues for the application in R2R process are discussed.