RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        구조모델을 이용한 다공성 매질의 유효열전도도 분석

        차장환,구민호,김영석,Cha, Jang-Hwan,Koo, Min-Ho,Keehm, Young-Seuk 한국지하수토양환경학회 2010 지하수토양환경 Vol.15 No.6

        The effective thermal conductivity of porous materials is usually determined by porosity, water content, and the conductivity of the matrix. In addition, it is also affected by the internal structure of the materials such as the size, arrangement, and connectivity of the matrix-forming grains. Based on the structural models for multi-phase materials, thermal conductivities of soils and sands measured with varying the water content were analyzed. Thermal conductivities of dry samples were likely to fall in the region between the Maxwell-Eucken model with air as the continuous phase and the matrix as the dispersed phase ($ME_{air}$) and the co-continuous (CC) model. However, water-saturated samples moved down to the region between the $ME_{wat}$ model and the series model. The predictive inconsistency of the structural models for dry and water-saturated samples may be caused by the increase of porosity for water-saturated samples, which leads to decrease of connectivity among the grains of matrix. In cases of variably saturated samples with a uniform grain size, the thermal conductivity showed progressive changes of the structural models from the $ME_{air}$ model to the $ME_{wat}$ model depending on the water content. Especially, an abrupt increase found in 0-20% of the water content, showing transition from the $ME_{air}$ model to the CC model, can be attributed to change of water from the dispersed to continuous phase. On the contrary, the undisturbed soil samples with various sizes of grains showed a gradual increase of conductivity during the transition from the $ME_{air}$ model to the CC model.

      • KCI등재후보

        지반굴착에 따른 지반 안정성 평가 시 지하시설물이 지하수흐름에 미치는 영향 분석

        차장환,이재영,김병찬,Cha, Jang-Hwan,Lee, Jae-Young,Kim, Byung-Chan 한국방재안전학회 2018 한국방재안전학회 논문집 Vol.11 No.2

        본 연구에서는 지반굴착 시 굴착구간 주변의 지하시설물이 지하수 흐름특성에 미치는 영향을 파악하기 위해 지하시설물의 규모와 이격거리, 지하수 동수구배 등을 고려하여 시나리오 기반으로 굴착 단계별 지하시설물의 영향을 지하수 수위 변화와 지하수 유출량 측면에서 비교 분석하였다. 그 결과 지하시설물의 규모가 증가할수록 수두차와 수두구배가 크게 발생하며 이격거리가 짧을수록 큰 수두차와 수두구배를 보인다. 모델영역의 지하수 수두구배에 따른 영향은 비교적 작은 것으로 나타났다. 또한 시나리오에 대한 지하수 유출량 분석 결과 지하시설물의 규모가 증가하거나 이격거리가 짧을수록 지하수 유출량이 감소하는 경향을 보인다. 이는 지반굴착에 따른 지하수 유동특성 분석에 있어 주변에 존재하는 지하시설물에 대한 영향 검토가 필요한 것으로 판단된다. The purpose of this study is to investigate the effect of underground facilities around excavation zone on groundwater flow characteristics during excavation. The scenarios were constructed considering the size of the underground facility, the separation distance, and the hydraulic gradient. As a result, as the size of the underground facility increases, the difference of head and the hydraulic gradient become large. The shorter the separation distance of underground facility is, the more the difference of head and the hydraulic gradient occur. The effect of hydraulic gradient on model area was relatively small. As a result of analysis of groundwater flow rate for the scenario, groundwater flow rate tends to decrease as the size of underground facility increases or groundwater flow rate tends to decrease as the separation distance decreases. It is necessary to examine the effect of underground facilities on the groundwater flow analysis in the ground excavation.

      • KCI등재

        구조모델을 이용한 암석의 유효열전도도 분석

        차장환,구민호,김영석,이영민,Cha, Jang-Hwan,Koo, Min-Ho,Keehm, Young-Seuk,Lee, Young-Min 대한자원환경지질학회 2011 자원환경지질 Vol.44 No.2

        For 21 rock samples consisting of granite, sandstone and the effective thermal conductivity (TC) was measured with the LFA-447 Nanoflash, and mineralogical compositions were also determined from XRD analysis. The structural models were used to examine the effects of quartz content and the size of minerals on TC of rocks. The experimental results showed that TC of rocks was strongly related to quartz content with $R^2$ value of 0.75. Therefore, the proposed regression model can be a useful tool for an approximate estimation of TC only from quartz content. Some samples with similar values of quartz content, however, illustrated great differences in TC, presumably caused by differences in the size of minerals. An analysis from structural models showed that TC of rocks with fine-grained minerals was likely to fall in the region between Series and EMT model, and it moved up to ME and Parallel model as the size of minerals increased. This progressive change of structural models implies that change of TC depending on the size of minerals is possibly related to the scale of experiments; TC was measured from a disk sample with a thickness of 3 mm. Therefore, in case of measurements with a thin sample, TC can be overestimated as compared to the real value in the field scale. The experimental data illustrated that the scale effect was more pronounced for rocks with bigger size of minerals. Thus, it is worthwhile to remember that using a measured TC as a representative value for the real field can be misleading when applied to many geothermal problems. 화강암, 사암, 편마암으로 구성된 21개 암석시료를 대상으로 열전도도를 측정하고, XRD 정량분석을 통해 구성광물의 조성을 파악하였으며, 구조모델 이용하여 석영 함량 및 광물입자의 크기가 암석의 유효열전도도에 미치는 영향을 분석하였다. 측정된 열전도도는 석영 함량과 높은 상관성을 보여 ($R^2=0.75$), 석영 함량으로부터 열전도도를 추정할 수 있는 선형회귀모형을 제시하였다. 화강암 및 변성암 일부 시료의 경우 유사한 석영 함량에도 불구하고 열전도도가 크게 다른 값을 보였는데, 이는 주로 광물업자의 크기 변화와 관련이 있는 것으로 나타났다. 구조모델을 통한 분석 결과 입자의 크기가 작은 경우 열전도도는 scries와 EMT모델의 중간 영역에 해당하는 값을 보이며, 입자가 커지면서 EMT모델, ME모델을 거쳐 Parallel모델에 근접하게 변화하였다. 이러한 열전달 구조모델의 변화는 입자의 크기에 따른 열전도도 변화가 3 mm 두께의 원반시편을 이용하는 실험 규모와 관련이 있음을 시사한다. 즉, 얇은 원반 시료를 이용하여 암석의 열전도도를 측정할 경우 규모효과에 의하여 실제 지반의 값보다 과대평가될 가능성이 높으며, 특히 광물 입자의 크기가 클수록 이러한 오차는 더 커질 것으로 예상된다. 따라서 지열과 관련된 다양한 해석 모델에서 실험실 측정값을 실제 현장규모에서의 대표값으로 사용할 경우 모델의 예측 신뢰도에 영향을 줄 수 있는 요인으로 작용할 수 있다.

      • KCI등재

        토양의 공극률 및 함수비가 열전도도에 미치는 영향

        차장환,안선준,구민호,김형찬,송윤호,서명석,Cha, Jang-Hwan,An, Sun-Joon,Koo, Min-Ho,Kim, Hyoung-Chan,Song, Yoon-Ho,Suh, Myoung-Seok 한국지하수토양환경학회 2008 지하수토양환경 Vol.13 No.3

        국내 16개 기상관측소에서 채취한 토양 시료에 대한 물성 실험을 통하여 토양의 공극률, 함수비, 밀도 및 입도 분포특성이 열전도도에 미치는 영향을 분석하였다. 상관성 분석결과 열전도도는 공극률이 증가함에 따라 감소하는 부의 상관성을 보이며 함수비가 증가함에 따라 증가하는 정의 상관성을 갖는다. 입도 분포 특성에 의한 열전도도의 변화는 미비하며 토양 입자 밀도가 클수록 열전도도가 다소 증가하는 경향을 보였다. 건조 토양의 경우 동일한 공극률에서도 열전도도의 차이가 크게 나타났다. 실험 자료를 이용하여 열전도도에 주된 영향을 미치는 공극률과 함수비를 변수로 하는 다중선형회귀모형 및 비선형회귀모형을 제시하였으며, 회귀모형의 결정계수는 각각 0.74 및 0.82로 높게 나타났다. 따라서 본 연구 결과는 공극률과 함수비를 측정하여 토양의 열전도도를 예측하는데 이용될 수 있다. This paper presents a comprehensive laboratory study that examines the effects of porosity, water content, density and grain size distribution on the thermal conductivity of soils which were sampled from 16 synoptic stations of Korea. The experimental results clearly demonstrate that porosity and water content are important parameters which strongly affect the thermal conductivity of soils. Soils with lower porosities and higher water contents have higher thermal conductivities. On the contrary, increase of the matrix density slightly increases the thermal conductivity, and grain size distribution hardly affects the thermal conductivity. Dry soils with the same porosity tend to have more scattered values of thermal conductivity than wet soils. Based on the experimental results, a multiple linear regression model and a nonlinear regression model, having two regression variables of porosity and water content, were presented to predict thermal conductivity. Both models show a high accuracy of prediction with $R^2$ values of 0.74 and 0.82, respectively. Thus, it is expected that the suggested empirical models can be used for predicting thermal conductivity of soils by measuring porosity and water content.

      • KCI등재후보

        지반굴착 시나리오 기반의 다공성 매질에 대한 3차원 유동해석모델 구축

        차장환(Jang Hwan Cha),이재영(Jae Young Lee),김우석(Woo Seok Kim) 한국방재안전학회 2017 한국방재안전학회 논문집 Vol.10 No.1

        최근 도심지에서 상하수도 등의 지중매설관 노후 및 접합 불량에 따른 누수에 의해 일어나거나, 터널굴착 및 지하구조물 시공 시 부실시공 또는 관리 부실로 인한 지하수의 유입으로 지중공동이 발생하고 이로 인하여 지반침하가 빈번하게 발생하고 있다. 이에 본 연구에서는 포화-불포화 다공성 매질에 대한 지하수 변동을 예측할 수 있는 수치모델(SEEFLOW3D)을 개발하였으며 개착식 및 비개착식 굴착 시나리오를 구성하여 지반굴착에 따른 영향을 모사하였다. 또한, 개발모델의 검증을 위해 범용수치해석 프로그램(Visual MODFLOW)과 비교 분석을 수행하였다. 그 결과 평균 오차는 -3.95∼5.72%이며 정규화된 RMSE는 0.56∼4.62%로 나타났다. 향후 본 연구의 개발모델은 지반굴착 공사 시 지하수 유출량을 예측하고 이에 따른 차수벽의 최적 설계 등을 위한 해석툴로 활용 가능할 것으로 기대된다. In recent years, ground subsidence has been frequently occurred by underground cavities due to the excessive groundwater inflow, caused by poor construction and management, during tunnel excavation and underground structure construction. In this study, a numerical model (SEEFLOW3D) was developed to estimate groundwater fluctuations for saturated- unsaturated poros media, evaluates the impact on ground excavation with open cut and non-open cut scenarios. In addition, the visual MODFLOW was applied to demonstrate the verification of the model compared with both results. Our results indicated that the RMSE and NRMSE was obtained to range over -3.95~5.7% and 0.56~4.62%, respectively. The developed model was expected to estimate groundwater discharges and apply analysis tool for optimum design of waterproof wall in future.

      • 국내 토양의 열전도도 실험 연구

        차장환(Cha, Jang-Hwan),안선준(An, Sun-Joon),구민호(Koo, Min-Ho),송윤호(Song, Yoon-Ho),김형찬(Kim, Hyeng-Chan) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.11

        16개 기상관측소에서 채취한 토양 시료에 대한 토양 물성 및 열특성를 측정하였으며 이를 통하여 공극률, 함수비, 충적밀도, 입도 분포, 유기물 함량, 토양구성광물의 종류 및 함량이 열전도도에 미치는 영향을 파악하였다. 상관성 분석결과 입도분포, 유기물함량 및 토양 구성광물의 종류 및 함량은 낮은 상관성을 보였으며 용적밀도 (R²=0.60), 함수비(R²=0.54)와 공극률(R²=0.56)은 높은 상관성을 보였다. 또한 함수비(2%)와 토양의 종류에 따른 다중회귀 분석을 통하여 토양의 열전도도를 추정할 수 있는 회귀식을 제시하였다.

      • 국내 암석의 암종별 열물성 특성 분석

        차장환(Cha, Jang-Hwan),명대원(Myoung, Dae-Won),구민호(Koo, Min-Ho),송윤호(Song, Yoon-Ho),김형찬(Kim, Hyeng-Chan) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.11

        본 연구에서는 국내 암석을 암종별로 총 292개 채취하였으며 열물성 측정 장비를 이용하여 이들 암석의 열물성을 측정하였다. 이와 더불어 암석의 물리적 특성을 측정하였으며 일부 시료의 경우 XRD 정량분석을 실시하였다. 이들 결과를 이용하여 암석의 열물성 특성과 열물성에 영향을 주는 인자를 파악하였다. 암석의 열물성 측정 결과 열전도도와 열확산계수는 화강암에서 가장 낮은 값을 보였으며 퇴적암, 변성암 순으로 나타났다. 또한 암종별 열물성 값의 범위를 살펴보면 변성암과 퇴적암에서 넓게 분포한다. 암석의 물성과 열물성과의 상관성 분석 결과 공극률이 증가함에 따라 열전도도와 열확산계수가 감소하나 상관성은 미약한 것으로 나타났다. XRD 분석 결과 암석의 열전도도는 석영(SiO₂)의 함량에 따른 선형의 비례관계를 보였다. 이로써 암석의 열전도도는 암석을 이루는 광물의 종류에 의하여 영향을 받음을 알 수 있다. 차후 암석의 구성 광물입자의 배열 상태에 따른 열물성 특성과 퇴적암 및 변성암 시료에 대한 이방성 실험을 통해 편리, 층리 및 엽리 등에 따른 열물생의 이방성 정도를 분석할 예정이다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼