http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조문성,김영균,정관진,이정욱,김훈,Cho, Moon-Sung,Kim, Yung-Kyun,Jung, Kwan-Jin,Lee, Jung-Uk,Kim, Hoon 한국조명전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.6
본 논문에서는 도로 조명용 광원으로 쓰이는 메탈핼라이드램프, 고압나트륨램프, PLS의 세 가지 광원에 대해 안개 발생시 시인성을 평가하기 위해 특정한 인공 안개 조건하에서 각 광원들에 대한 피시험자들의 평가를 분석하여 명소시에는 고압나트륨램프가 시인성이 좋고 암소시에는 PLS가 시인성이 좋다는 결과를 얻었으며 이 결과는 앞으로의 도로 조명용 광원의 선택에 있어서 도움을 줄 수 있을 것으로 기대된다. In this paper, It evaluated visibility about Metal Halide Lamp(MHL), High Pressure Sodium Lamp(HPS) and PLS(Plasma Lighting System) as Road lighting source in fog conditions. To evaluate visibility, it analyzed valuation of subjects about each light sources in special fog conditions. In result, it obtained that High Pressure Sodium Lamp has best visibility in photopic vision and PLS has best visibility in scotopic vision. This result is expected to help about select of Road lighting source.
조문성(Moon-Sung Cho) 한국조명·전기설비학회 2016 조명·전기설비학회논문지 Vol.30 No.7
Standard for roadlighting is very diverse. Therefore, it is impossible to meet all roadlighting standards in the world with a only one light intensity distribution. Also, it is too difficult to develop individual optical parts for every road conditions. Especially, it is more difficult in LED lighting than traditional lighting by material of optic and light source characteristic. This paper suggests a solution to make suitable light intensity distributions for many roadlighting standards by using some reference distributions.
조문성(Moon-Sung Cho),배재성(Jae-Sung Bae),김학봉(Hark-Bong Kim),김우진(Woo-Jin Kim) 한국항공우주학회 2008 韓國航空宇宙學會誌 Vol.36 No.12
본 연구에서는 플래핑 운동하는 에어포일에 대한 비틀림 유연성의 영향을 조사하였다. 비틀림 유연성이 있는 에어포일의 공기력은 2차원 비정상 와류 패널 방법을 이용하여 계산하였다. 플래핑 에어포일의 공탄성 해석을 위해 2차원의 typical section 모델이 사용되었다. 주요한 파라미터로서 비틀림 유연성과 가진주파수가 고려되었다. Pfoil/ P/fluid = 15인 무거운 에어포일 조건에서는 주파수비가 0.75 부근에서 추력 최대점이 발견되었다. 이 추력치를 경계로 두 가지 다른 운동이 관찰되었으며, 하나는 관성 지배 운동(inertia driven deformation motion)이고, 다른 하나는 진동 지배 운동(oscillation driven deformation motion)이다. 또한, 최대 추력 상태에서는 비틀림 유연성과 가진주파수에 관계없이 위상각이 85도를 유지하였다. In this paper, the effects of torsional flexibility on a flapping airfoil are investigated. The aerodynamic forces of a torsional flexible flapping airfoil is computed using 2-D unsteady vortex panel method. A typical-section aeroelastic model is used for the aeroelsatic calculation of the flapping airfoil. Torsional flexibility and excitation frequency are considered as main effective parameters. Under heavy airfoil condition Pfoil/ Pfluid = 15, the thrust peak is observed at the points where the frequency ratio is about 0.75. Based on this peak criterion, there exists two different motions. One is an inertia driven deformation motion and the other is an oscillation driven deformation motion. Also, in the thrust peak condition, the phase angle is kept 85 degrees, independent of the torsional flexibility and the excitation frequency.
콤팩트 메탈헬라이드 램프용 가로등 기구의 3차원 반사판 설계법 개발
조문성(Moon-Sung Cho),이창모(Chang-Mo Lee),석대일(Dae-Il Seok),김훈(Hoon Kim) 한국조명·전기설비학회 2007 한국조명·전기설비학회 학술대회논문집 Vol.2007 No.5월
본 논문에서는 콤팩트 메탈헬라이드 램프용 가로등 기구의 반사관에 대해 2차원 설계법을 기반으로 하는 3차원 설계법을 제시하고 포토피아 20의 반사판 설계 툴을 사용하여 150W 콤팩트 메탈헬라이드 램프용 도로 조명 지구의 반사판을 설계하였다.
콤팩트 메탈헬라이드 램프 전용 가로등 기구의 반사판 설계
조문성(Moon-Sung Cho),김형권(Hyeng-Kwon Kim),정남용(Nam-Yong Jung),김진모(Jin-Mo Kim) 한국조명·전기설비학회 2009 한국조명·전기설비학회 학술대회논문집 Vol.2009 No.5월
본 논문에서는 콤팩트 세라믹 메탈헬라이드 램프용 가로등 기구의 반사판에 대해 2차원 설계법을 기반으로 한 3차원 설계로 150W single-ended type 콤팩트 세라믹 메탈헬라이드 램프 전용의 가로등 용 반사판을 설계하였다.
조문성(Moon-Sung Cho),김영균(Yung-Kyun Kim),정관진(Kwan-Jin Jung),이정욱(Jung-Uk Lee),김훈(Hoon Kim) 한국조명·전기설비학회 2006 한국조명·전기설비학회 학술대회논문집 Vol.2006 No.11월
도로 조명은 야간에 운전자와 동승자 및 보행자의 안전을 도모하고 운전자에게 광학적 안내 기능을 제공한다. 그러나 안개가 발생하게 되면 도로 조명의 기능이 현저히 저하되어 사고의 위험이 증대된다. 그러나 아직까지 안개 발생시 도로 조명에 관한 연구는 미비한 실정이다. 따라서 이러한 문제의 인식과 함께 현재 도로조명용 광원으로 가장 많이 쓰이고 있는 램프들에 대해 특정한 안개 조건 하에서 비교 실험하여 시인성을 비교하였다.
겔침전과 화학증착법에 의한 구형 UO<sub>2</sub> 입자와 TRISO 피복입자 제조
정경채,김연구,오승철,조문성,Jeong, Kyung-Chai,Kim, Yeon-Ku,Oh, Seung-Chul,Cho, Moon-Sung 한국세라믹학회 2010 한국세라믹학회지 Vol.47 No.6
HTGR using a TRISO coated particles as nuclear raw fuel material can be used to produce clean hydrogen gas and process heat for a next-generation energy source. For these purposes, a TRISO coated particle was prepared with 3 pyro-carbon (buffer, IPyC, and OPyC) layers and 1 silicone carbide (SiC) layer using a CVD technique on a spherical $UO_2$ kernel surface as a fissile material. In this study, a spherical $UO_2$ particle was prepared using a modified sol-gel method with a vibrating nozzle system, and TRISO coating fabrication was carried out using a fluidized bed reactor with coating gases, such as acetylene, propylene, and methyltrichlorosilane (MTS). As the results of this study, a spherical $UO_2$ kernel with a sphericity of 1+0.06 was obtained, and the main process parameters in the $UO_2$ kernel preparation were the well-formed nature of the spherical ADU liquid droplets and the suitable temperature control in the thermal treatment of intermediate compounds in the ADU, $UO_3$, and $UO_2$ conversions. Also, the important parameters for the TRISO coating procedure were the coating temperature and feed rate of the feeding gas in the PyC layer coating, the coating temperature, and the volume fraction of the reactant and inert gases in the SiC deposition.
변형 Sol-Gel 방법을 이용한 고온가스로 핵연료 미세구입자 제조
정경채,김연구,오승철,조문성,Jeong, Kyung-Chai,Kim, Yeon-Ku,Oh, Seung-Chul,Cho, Moon-Sung 한국세라믹학회 2009 한국세라믹학회지 Vol.46 No.6
$UO_2$ microsphere particles, core material of HTGR(High Temperature Gas Reactor) nuclear fuel, were prepared using by the GSP(Gel Supported Precipitation) method which is a modified-method of the wet sol-gel process. The spherical shape of initial liquid ADU droplets from the vibration nozzle system was continuously kept till the conversion to the final $UO_2$ microsphere. But the size of a final $UO_2$ microsphere was shrunken to about 25% of an initial ADU droplet size. Also, we found that the composition of dried-ADU gel particles was constituted of the very complicated phases, coexisted the U=O, C-H, N-H, N-O, and O-H functional groups by FT-IR. The important factors for obtain the no-crack $UO_2$ microsphere during the thermal treatment processes must perfectly wash out the remained-$NH_4NO_3$ within the ADU gel particle in washing process and the selections of an appropriate heating rate at a suitable gas atmosphere, during the calcining of ADU gel particles, the reducing of $UO_3$ particles, and the sintering of $UO_2$ particles, respectively.
유동층 화학기상증착법으로 제조된 TRISO 피복입자의 ZrC 층 미세구조와 경도에 미치는 증착온도의 영향
고명진,김대종,김원주,조문성,윤순길,박지연,Ko, Myung-Jin,Kim, Daejong,Kim, Weon-Ju,Cho, Moon Sung,Yoon, Soon Gil,Park, Ji Yeon 한국세라믹학회 2013 한국세라믹학회지 Vol.50 No.1
Tristructural-isotropic (TRISO)-coated particles were fabricated by a fluidized-bed chemical vapor deposition (FBCVD) method for use in a very high temperature gas-cooled reactor (VHTR). ZrC as a constituent layer of TRISO coating layers was deposited by a chloride process using $ZrCl_4$ and $CH_4$ source gases in a temperature range of $1400^{\circ}C$ and $1550^{\circ}C$. The change in the microstructure of ZrC depending on the deposition temperature and its effect on the hardness were evaluated. As the deposition temperature increased to $1500^{\circ}C$, the grain size of the ZrC increased and the hardness of the ZrC decreased according to the Hall-Petch relationship. However, at $1550^{\circ}C$, the ZrC layer was highly non-stoichiometric and carbon-rich and did not obey the Hall-Petch relationship in spite of the decrease of the grain size. A considerable amount of pyrolytic carbon at the grain boundaries of the ZrC as well as coarse granular pyrolytic carbon were locally distributed in the ZrC layer deposited at $1550^{\circ}C$. Therefore, the hardness decreased largely due to the formation of a large amount of pyrolytic carbon in the ZrC layer.