http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장정환,김진성,정해동,조권회,Chang, Jung-Hwan,Kim, Jin-Sung,Chung, Hae-Dong,Cho, Kwon-Hae 한국압력기기공학회 2009 한국압력기기공학회 논문집 Vol.5 No.1
The emergency diesel generator (EDG) in a nuclear power plant (NPP) shall start within 10 secondss and supply electrical power to engineered safety features within one minute and less if a loss of offsite power (LOOP), A design-basis event, or their combination occur. Each NPP has an EDG set consisting of two diesel generators for redundancy. In addition to the EDG set, an alternate Alternating Current Diesel Generator (AAC DG) is installed and shared by several units to cope with a station black out (SBO), i.e., loss of the offsite power concurrent with reactor trip and unavailability of the EDG set. The objective of this study is to analyze the failure data of emergency diesel generators reported in overseas nuclear power plants.
이종금속용접부 예방정비 방법에 따른 잔류응력 분포 고찰
송태광,최영환,박정순,정해동,오창영,Song, Tae-Kwang,Choi, Young Hwan,Park, Jeong Soon,Chung, Hae-Dong,Oh, Chang-Young 한국압력기기공학회 2011 한국압력기기공학회 논문집 Vol.7 No.4
This paper presents the effects of preventive maintenance schemes on the residual stress distributions in dissimilar metal welds. Dissimilar metal weld is known susceptible to PWSCC and thus, effective maintenance schemes to prevent PWSCC are needed. Three preventive maintenances schemes, i.e. weld overlay, MSIP and inlay weld which are widely used in nuclear power plants, are selected and their effects on welding residual stresses are investigated via finite element analyses. As results, weld overlay and MSIP were proved effective method to mitigate residual stresses and inlay weld, on the other hand, produces strong tensile residual stresses in the inner surface. Although Alloy 690 known to be resistant to PWSCC are used in inlay weld, continuous careful observation are needed since tensile welding residual stresses are key parameter for PWSCC.
정옥철(Ok-Chul Jung),김해동(Hae-Dong Kim),정대원(Dae-Won Chung) 한국항공우주연구원 2008 항공우주기술 Vol.7 No.1
본 논문에서는 아리랑위성 2호의 영상촬영 계획 절차를 살펴보고, 각 단계에서 발생할 수 있는 궤도예측 오차를 분석하였다. 이를 위해 영상촬영 계획을 수립하는 PSS와 명령계획을 작성하는 MAPS에서 각각 계산된 자세정보를 상호 비교하여 궤도예측 오차의 원인을 규명하였다. 또한, 아리랑위성 2호의 실제 영상자료를 이용하여 촬영된 영상의 중심점과 미리 계획된 목표지점 사이의 이탈거리인 촬영 지향오차를 계산하였다. 영상촬영 계획은 실제 촬영일보다 이전에 수행되어 궤도예측 오차를 어느 정도 포함하게 되므로, 영상촬영 계획 시 일정한 Margin을 적용해야 할 것으로 판단된다. In order to acquire the images requested by users, it is very important to calculate mission schedule parameters such as imaging execution time and attitude tilt angle accurately. These parameters are based on orbit prediction. This paper describes the accuracy of orbit propagation for image planning. The orbit prediction data from PSS and MAPS has a certain discrepancy due to different orbit propagator. It is necessary for mission planner to confirm this value during mission planning phase. The pointing error which means the difference between target center and real linage received is calculated and analyzed using KOMPSAT-2 linage data.
정옥철(Ok-Chul Jung),김해동(Hae-Dong Kim),최수진(Su-Jin Choi),정대원(Dae-Won Chung) 한국항공우주연구원 2009 항공우주기술 Vol.8 No.2
본 논문에서는 단일 임무운용 개념에서 벗어나 향후 다수의 위성들을 동시에 직접 제어하거나, 임무가 상이하더라도 주요 핵심시스템을 근간으로 각 위성마다 소요되는 임무운용 시스템을 개발함에 있어 개발기간을 획기적으로 줄일 수 있는 차세대 통합형 임무운용시스템 개발을 위한 분석 및 설계결과를 기술하였다. 이를 위해 우주개발선진국들의 통합지향형 임무운용시스템 개발 추세 및 개발 동향을 살펴보고, 각 시스템들의 주요 기능을 수행하는 공통 핵심시스템의 구조도 분석하였으며 설계 결과를 제시하였다. This paper represents the analysis and design of the generic mission operations system for next generation satellite mission. In the past, mission operations systems were developed by their own mission requirements respectively. However, these systems have the similar architecture and common functions. Mission operations systems, in general, consist of mission independent module and mission specific module. In this paper, the generic framework for the mission scheduling and automation are introduced and analyzed. Using these generic frameworks, the risk and cost for operations system development can be reduced significantly. And, these frameworks might be used for the core technology in the development of mission operations system in the future.
Lactobacillus plantarum를 이용한 유산균 발효 및 열처리가 마늘의 향기성분 및 항산화 활성에 미치는 영향
김의수 ( Eui Su Kim ),송지혜 ( Ji Hye Song ),정하열 ( Ha Yull Chung ),정헌상 ( Heon Sang Jeong ),장해동 ( Hae Dong Jang ),김교남 ( Gyo Nam Kim ) 한국산업식품공학회 2012 산업 식품공학 Vol.16 No.4
마늘의 다양한 생리활성 기능은 잘 알려져 있음에도 불구하고 휘발성 황 화합물을 비롯한 마늘의 독특한 향과 맛으로 인해 가공식품 및 건강기능식품으로 활용하는데 있어 제한점이 많다. 따라서 본 연구에서는 대표적인 김치 발효균인 Lactobacillus plantarum KCTC 3104를 이용하여 마늘을 유산 발효시키고, 발효 마늘을 다시 적정 온도로 가열 처리함으로써 발효과정과 열처리가 마늘의 휘발성 황화합물과 항산화 활성에 어떠한 영향을 미치는지 평가하고자 하였다. 본 연구의 결과를 요약하자면 다음과 같다. (i) 마늘에 존재하는 주요 휘발성 황 화합물인 allyl methyl sulfide 및 allyl sulfide, diallyl disulfide는 발효과정과 발효와 열처리 병행과정에서 감소하였으며 특히 열처리는 마늘의 자극적 향미성분을 감소시키는데 크게 기여하였다. (ii) 무처리한 G와 발효를 한 FG, 그리고 발효와 열처리를 병행한 FG-H 간에 유의적인 peroxyl radical 소거활성은 차이는 없었다. (iii) 발효와 열처리를 병행한 FG-H는 마늘시료 G에 비하여 hydroxyl raidcal 소거활성이 증가하였으며 이 증가된 hydroxyl radical 소거활성은 발효 및 열처리를 통해 새로이 생성된 물질에 의한 환원력 및 metal chelating 활성 증가에 기인된 것으로 추측된다. 이상의 연구결과는 발효 및 열처리를 통해 마늘의 자극적 향미를 개선할 수 있다는 가능성을 제시할 뿐만 아니라, 발효 및 열처리 마늘은 항산화 활성, 특히 hydroxyl radical 소거활성이 증가된 식품개발에 기초자료로 사용될 수 있을 것으로 생각된다. Garlic (Allium sativum L.) has been used as a spicy and folk medicine in many Asian countries. Although it is known to possess various beneficial functions in biological system, there are some limitations in food industries since its pungent flavor derived from sulfur containing-volatile components such as allyl methyl sulfide, allyl sulfide, and diallyl disulfide. Here, we prepared both fermented garlic (FG) with Lactobacillus plantarum and FG with heat processing at 100 for 2 h (FG-H). We analyzed the contents of allyl methyl sulfide, allyl sulfide, and diallyl disulfide in dried garlic (G), FG, and FG-H. We also demonstrated the scavenging activities of G, FG, and FG-H against peroxyl and hydroxyl radical as judged by ORAC (oxygen radical absorbance capacity). The scavenging activities of G, FG and FG-H against peroxyl and hydroxyl radicals were 2.96, 1.46, 2.28 and 0.18, 1.36, 3.43 TE (Trolox equivalents), respectively. We elucidated that the scavenging activities of FG and FG-H against hydroxyl radicals are mediated by their reduction capacities and metal chelating activities. Taken together, these results indicated that fermentation with Lactobacillus plantarum and heat processing could contribute to the alleviation of pungent flavor in garlic and its anti-oxidant activity. These results provide the scientific evidences for the development of functional foods using garlic which has anti-oxidant function.