http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정준교,황의영,최정영,남궁완,Cheong, Jun-Gyo,Hwang, Eui-Young,Choi, Jung-Young,Namkoong, Wan 유기성자원학회 1996 유기물자원화 Vol.4 No.1
본 연구는 물용출액 성분의 분석을 통하여 적합한 퇴비숙성도 판단지표를 찾아내는 것을 목적으로 하였다. 연구에 사용된 음식쓰레기는 우리나라에서 발생되고 있는 평균조성의 음식쓰레기, 곡류가 많이 포함된 음식쓰레기 그리고 어육류가 많이 포함된 음식쓰레기이었다. 그리고 폐지 및 낙엽은 공극개량물질로 사용하였다. 실험결과 물용출액의 TOC, 물용출액의 $C_{org}/N_{org}$는 변화경향이 일정하여 퇴비숙성도 평가지표로 유용하게 이용될 수 있었다. 특히 물용출액의 $C_{org}/N_{org}$는 퇴비화 중간과정에서는 다소 불규칙하게 변화하였으나 최종적으로는 일정한 수치로 수렴하여 바람직한 퇴비숙성도 지표로 판단되었다. 한편 물용출액 TKN은 퇴비숙성도 평가지표로 부적합한 항목이었다. 물용출액내의 암모니아성 질소는 퇴비화기간 동안 불규칙한 변화를 보였으나 원재료의 성상에 관계없이 최종 암모니아성 질소는 퇴비 건조질량기준으로 0.067~0.085% 사이였다. Qualititative changes in water extracts during food waste composting were studied in order to identify parameters that can be used as indicaters of compost maturity. Materials used in this study were food wastes, office paper, newspaper and leaves. Three different compositions of food wastes were used : average composition food waste generated in Korea, a high cereal (carbohydrate) content food waste and a high meat (protein) content food waste. Experimental results indicated that parameters which can be used for compost maturity evaluation were water soluble TOC and water soluble $C_{org}/N_{org}$ ratio. In case of water soluble TOC, it is considered as one of the most desirable parameters, since it showed quite distinct decrease pattern than any other parameters. The $C_{org}/N_{org}$ ratio in the water extracts can also be considered as a appropriate index of the compost maturity since this ratio reached a narrow range (5~6) at the end of composting process regardless of initial raw waste compositions. Water soluble TKN was undesirable parameter as a compost maturity index. The ammonia nitrogen content in water extracts varied considerably during composting process, but finally reached a range of 0.067, 0.085% based on dry compost.
수치해석을 이용한 순환형공기분급기 유동특성 및 분급성능 연구
윤정환(Jong-Hwan Yoon),정준교(Jun-Gyo Cheong) 대한기계학회 2017 大韓機械學會論文集B Vol.41 No.3
본 연구에서는 전산유체역학 프로그램을 이용하여 순환형공기분급기 내부유동 및 입자거동을 해석하였다. 주날개 및 분급날개의 회전속도 조건을 변화시키며 이에 따른 등급분급효율, 절단입경 및 분급첨예도 변화를 예측하였다. 주날개의 회전속도를 제어함으로써, 절단입경을 증가시킬 수 있었으나, 오염토양 분급에 적용할 수 있을 정도의 정확도를 확보할 수 없었다. 반면, 분급날개의 회전속도를 증가시킴으로써, 절단입경을 감소시킬 수 있었으며, 보다 정확하게 입자를 선별할 수 있었다. 결과적으로 주날개와 분급날개를 동시에 사용할 경우, 높은 분급첨예도 결과를 보이며, 우수한 분급특성을 유지할 수 있었다. In this study, we performed numerical simulations on a circulating air classifier using a commercial computational fluid dynamics program. The variations in the grade efficiency, the cut-size and the cut-sharpness were calculated and discussed. By controlling the rotating speed of the main fan, the cut-size could be rapidly increased. However the linearity of the cut-size variation with respect to the main fan speed was not sufficient for application to contaminated soil classification processes. On the other hand, by varying the rotating speed of the classifying fan, the cut-size gradually decreased and could be precisely adjusted. Using both the main fan and the classifying fan, we could achieve larger cut-sharpness values and better classifying performances.