http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고추력용 철심형 영구자석 선형동기전동기의 운전조건을 고려한 설계
정상용,Jung, Sang-Yong 한국조명전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.6
본 논문에서는 철심형 영구자석 선형동기전동기(PMLSM, Steel-Cored Permanent Magnet Linear Synchronous Motor)에서 운전 특성을 고려한 설계 특성 및 전략 등에 대한 내용을 다룬다. 특히 반송장치의 운송궤적에서 요구하는 동적특성과 전동기의 동적용량(Dynamic Capability)을 고려한 동적제약조건(Dynamic Constraints) 규정을 통하여, 짧은 변위의 급가감속 왕복운전을 위한 철심형 PMLSM의 최적설계 전략을 살펴본다. 이와 더불어 동특성이 두드러진 PMLSM의 설계특성으로 열적인 특성, 디텐트력 해석 및 저감, 그리고 자계의 포화특성에 대하여 추가 고찰한다. This paper presents the design characteristics and strategies applied for steel-cored PMLSM(Permanent Magnet Linear Synchronous Motor) considering the running conditions. Particularly, optimal design consideration on steel-cored PMLSM for short reciprocating trajectory using dynamic capability and dynamic constraints has been performed. Furthermore, thermal aspects, detent force, and magnetic saturation in design of steel-cored PMLSM have been investigated.
전기추진선박 운전별 전력특생 해석 및 추진전동기 특성 비교 분석
정상용(Sang-Yong Jung),이상곤(Sanggon Lee),김상훈(Shanghoon Kim) 한국마린엔지니어링학회 2010 한국마린엔지니어링학회 학술대회 논문집 Vol.2010 No.10
This paper deals with the characteristic analysis of the integrated power system applied for the electric propulsion ships. This includes the electric power system modeling. In addition, performance comparison between the permanent magnet synchronous motor (PMSM) and the induction motor (IM) for 3.7㎿ ship propulsion has been done using finite element analysis (FEA).
정상용(Jung, Sang-Yong) 한국산업비즈니스학회 2018 한국비즈니스연구 (비즈니스연구) Vol.2 No.2
본 연구는 검사기관의 환경을 고려하여 적정검사건수를 산출 순응도를 높이기 위하여 검사건수산정 가이드를 제시하는 것을 목적으로 원가요인을 활용한 적정검사건수 산정 모형개발에 목적이 있다. 시험·검사시간의 수행능력을 고려하여 적정검사건수 산정에 반영할 수 있는 여라가지 변수를 활용한 적정검사건수 산출 방법론을 설정하고 모형화 하였다. 기 신고 된 각 시험·검사기관의 시험·검사 수행건수를 종속변수로 활용하였으며 각 분야별 모형의 설명력은 90%이상으로 높게 산출되었다. The purpose of the paper is to develop a guide to increase the report on proper inspection. The factors used in the guide are related to cost. A model for calculating the proper number of inspections was developed considering the capability of the testing agency. The data of the testing agency are utilized and the accuracy of the models by area is more than 90%.
멀티-태스킹을 이용한 효율적인 Bio-Automation 시스템
정상용(Sang-Yang Jung),이상호(Sang-ho Lee) 한국정보과학회 2004 한국정보과학회 학술발표논문집 Vol.31 No.2Ⅱ
최근의 생물학 연구는 "시스템 생물학 또는 시스템 생명공학"으로 발전하면서 생명체 분석의 속도와 용량이 상상을 초월할 만큼 발전하고 있으며 이것이 성공여부 판가름의 중요한 변수로 작용함에 따라 다량의 샘플들을 빠른 시간 안에 처리하기 위한 high throughput bio-automation system이 속속 개발되고 있다. 이 연구에서는 현재까지 개발되어 상용화된 high throughput bio-automation system들의 멀티-태스킹에 있어서의 문제점을 지적하고 개선된 합리적인 멀티-태스킹을 제시하였다.
슬롯수와 극수비의 조합에 의한 영구자석 동기모터의 특성 비교
정상용 ( Sang Yong Jung ),김용재 ( Yong Jae Kim ),조금배 ( Geum Bae Cho ) 조선대학교 공학기술연구원 2010 공학기술논문지 Vol.3 No.3
Permanent Magnet Type Synchronous Motors (PMSMs) can realize the high-efficient drive which spreads the application field. Recently, not only steady-state characteristic but also improvement in transient characteristic are required. Especially, the reduction of the torque ripple its indispensable to the smooth rotation. The cogging torque becomes the representative factor, and its minimization is required. By the difference between the slot combination, the behavior of the cogging torque was examined. The result showed that the slot combination in which the cogging torque becomes a minimum existed.
정상용(Sang Yong Jung),이헌석(Heon Seok Lee),김범수(Bum Su Kim),유진환(Jin Hwan Yoo),박철환(Chul Hwan Park),고재욱(Jae Wook Ko) 한국가스학회 2010 한국가스학회지 Vol.14 No.1
공정내의 가연성 혹은 독성가스를 연소시켜 안전한 물질로 전환시키는 것을 목적으로 플레어시스템이 설치되어 있다. 플레어시스템은 공정의 안전성 향상을 위하여 폐가스의 안전한 연소가 가장 중요한 요소이다. 연소의 복사열이 공정의 위험요인이 되지 않도록 API 521 Code에 규정되어 있다. 플레어스택에서 발생하는 화염의 형상은 방출되는 가스의 압력과 질량유속에 의하여 jet fire의 형상을 하고 있으며, 이를 API 521 Code 방식이 아닌 Chamberlain Model을 이용하여 화염의 형상을 확인하고, 이로 인한 복사열을 분석하였다. The most important element for improving the process safety that occurs from the flare system installed to convert into safe materials by burning the inflammable or toxic gases within the process and this is specified in the API 521 Code so that the radiation does not cause a risk factor. The flames that occur from the flare stack holds the shape of jet fire due to the pressure and flow velocity of discharge gas. This study has identified the shape of flames by using the Chamberlain Model rather than the API 521 Code method, analyzing the radiation due to this.
들기 작업할 때 자세의 변화에 따른 악력과 지면 반발력의 상관관계
정상용(Sang Yong Jung),강진우(Jin Woo Gang),구정완(Jung Wan Koo) 대한인간공학회 2009 大韓人間工學會誌 Vol.28 No.3
The purpose of this study, during the lifting task was researching the difference and a relationship between the ground reaction force and the grip strength by change of position. After grip strength has measured in symmetry position and asymmetry position at 45cm and 75cm of height of hand, ground reaction force was measured by same attitude lifting wooden box. We analyzed the difference of grip strength and ground reaction force in each position change. The results of grip strength, the grip strength of both hand were significant difference that in study subject symmetry and asymmetry position (p<0.01). The results of symmetry lifting task, the study subjects was significant difference of the ground reaction force difference by height (p<0.05). Asymmetry lifting task was significant difference of ground reaction force difference by direction of rotation was changed (p<0.01). The result of it will rotate with non-dominant hand side of lifting tasks from height 75cm where it easily maintains a balance possibility and decreasing the load of the hand. Therefore, from the workshop in the work people, it will be between the height 75cm and non-dominant hand side of trunk rotatory direction in the lifting tasks. Future study is necessary researched about the change of grip strength when the height of the hand is higher, and the difference of the ground reaction force when the change of weight.