http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
개구결합을 이용한 H 형태 초전도 안테나의 제작 및 특성 해석
정동철,한병성,유기수,이종하,석중현,이은홍,Chung, Dong-Chul,Han, Byoung-Sung,Ryu, Ki-Su,Lee, Jong-Ha,Sok, Jung-Hyun,Lee, Eun-Hong 대한전자공학회 2000 電子工學會論文誌 IE (Industry electronics) Vol.37 No.1
"H" 형태의 공진기로서 이루어진 초전도 안테나는 비슷한 크기를 가진 마이크로스트립 안테나에 비하여 소형화에 유리하다. "H"형 초전도 안테나 제작을 위해 rf 마그네트론 스퍼터링을 이용하여 $YBa_2Cu_3O_{7-x}$ (YBCO)/MgO 고온초전도 박막을 제조하였으며 표준 식각법을 이용하여 안테나를 형상화 하였다. 일반 금속과의 특성을 비교하기 위해서 동일한 차원의 금 안테나가 제작되었다. 개구 결합 방식을 이용하여 초전도 안테나 패치와 $50{\Omega}$ 급전선을 임피던스 결합을 시켰다. 다양한 종류의 실험 결과가 반사손실, 공진주파수, 특성임피던스 등을 중심으로 보고되었다. H형 초전도 안테나는 금 안테나에 비하여 정재파비에서 0.36 효율에서 24% 반사손실에서 14.6bB 이상 더 우수한 성능을 보여주었다. The high-$T_c$ Superconducting (HTS) antenna which consists of "H" type resonator has the benefits for the miniaturization of antenna in comparison with the microstrip antenna of the similar dimension. To fabricate the "H" type antenna, HTS $YBa_2Cu_3O_{7-x}$ (YBCO) thin films were deposited on MgO substrates using rf-magnetron sputtering. Standard etching processes were performed for the patterning of the "H" type antenna. For comparison between normal conducting antennas and superconducting antennas, the gold antennas with the same dimension were also fabricated. An aperture coupling was used for impedance matching between $50{\Omega}$ feed line and HTS radiating patch. The diverse experimental results were reported in terms of the resonant frequency, the return loss and the characteristics impedance. The "H" type superconducting antenna showed the performance of 1.36 in SWR, 24% in efficiency, and 14.6 dB in the return loss superior of the normal conducting counterpart.
정동호,이용두,박한일,Jung Dong-Ho,Lee Yong-Doo,Park Han-Il 한국해양환경·에너지학회 2003 한국해양환경·에너지학회지 Vol.6 No.3
해저배관은 지반쇄굴로 인하여 일부분이 노출되어 자유경간이 형성될 수 있다. 자유경간이 형성되면 환경하중 및 와동유기진동에 의해서 안정성을 잃을 수 있다. 본 연구에서는 해저배관의 안정성을 위협하는 중요 요소인 자유경간의 정적 및 동적 경간을 결정하는 방법을 제시한다. 자유경간 해석에서는 해저배관에 작용하는 압축력 효과를 고려하였으며 토양의 종류에 따라 경계조건을 일반화시켰다. 자유경간 양단의 해저지반은 탄성기초로 간주하였으며, 이들 선형 및 회전 스프링으로 치환하여 경계조건을 일반화시켰다. 정적 및 동적 자유경간의 길이를 산정 할 수 있는 무차원화 된 곡선을 구하였다. 예제해석을 수행하여 그 적용방법을 소개하였다. 본 연구결과는 자유경간을 갖는 해저배관의 설계에 유용하게 적용될 수 있다. The free span of a subsea pipeline due to seabed scouring can result in structural failure by severe ocean environmental loads and vortex induced vibrations. This Paper examines the safety of subsea pipelines with free spans under axial compressive load. The variation of allowable lengths of static and dynamic free spans is examined for generalized boundary conditions. The free span is modelled as a beam with an elastic foundations and the boundary condition is replaced by linear and rotational springs at each end. The static and dynamic free span curves are obtained with a function of non-dimensional parameters. A case study is carried out to introduce the application method of the curve. The results of this study can be usefully applied for the design of subsea pipelines with a free span.
수치해석적 방법을 통한 해양심층수 취수용 유연 라이저의 거동 해석에 관한 연구
정동호(DONG-HO JUNG),김현주(HYEON-JU KIM),박한일(HAN-IL PARK) 한국해양공학회 2004 韓國海洋工學會誌 Vol.18 No.4
Static and dynamic analyses of a very flexible and light riser, for upwelling the deep ocean water, is performed. In this numerical study, an implicit finite difference algorithm is employed for three-dimensional riser equations. Fluid non-linearity and bending stiffness are considered and solved, using the Newton-Raphson iteration. Maintaining the depth of end point of a flexible and light riser is very important for upwelling deep ocean water in a floating type development system. Weight is attached at the end point of the riser in order to maintain its intake depth. It is designed under the strong surface current and the configuration of the riser is predicted. In the dynamic analysis, the tension variation at the top point of the riser is presented. The results of this study can contribute to the design of the development system in floating type for upwelling deep ocean water.
PSD 센서 및 Back Propagation 알고리즘을 이용한 AM1 로봇의 견질 제어
정동연,한성현,Jung, Dong-Yean,Han, Sung-Hyun 한국산업융합학회 2004 한국산업융합학회 논문집 Vol.7 No.2
Neural networks are used in the framework of sensor based tracking control of robot manipulators. They learn by practice movements the relationship between PSD(an analog Position Sensitive Detector) sensor readings for target positions and the joint commands to reach them. Using this configuration, the system can track or follow a moving or stationary object in real time. Furthermore, an efficient neural network architecture has been developed for real time learning. This network uses multiple sets of simple back propagation networks one of which is selected according to which division (Corresponding to a cluster of the self-organizing feature map) in data space the current input data belongs to. This lends itself to a very training and processing implementation required for real time control.